Having problems with your Samsung SyncMaster 2233BW 22" LCD Monitor ?

Cannot attach base to samsung lcd monitor sw2233

\015 The base of the monitor is plastic. The insert into the monitor itself has a plastic insert with two holes. I tried to insert the stand into the monitor without success. I removed the plastic insert and was able to attach it, but it didnt feel right. Should I put the plastic back and try again.\015

Answers :

Llay the monitor face down on the floor (I put it in the styrofoam from the package) and then put it up against a solid surface. Then push the part into the socket before attaching the round base.
\015\012
\015\012I tried pushing down onto the monitor while holding it upright but that didn't work. When I called Samsung tech support the solution above is what they told me to try and it worked.
\015\012
It is a pain but you have to push it into the holes from the back first and the push it forward to snap it in place.
Repair Help & Product Troubleshooting for Samsung SyncMaster 2233BW 22" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cannot attach base to samsung lcd monitor sw2233


Llay the monitor face down on the floor (I put it in the styrofoam from the package) and then put it up against a solid surface. Then push the part into the socket before attaching the round base. \015\012\015\012I tried pushing down o ... Samsung SyncMaster 2233BW 22" LCD Monitor

Trouble attaching base to Samsung 2233BW LCD


... Computer Monitors

Unable to print using samsung print on Windows XP


To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

Samsung lcd monitor. I put in the base unit and cannot remove it? Any isead?


I had the same problem with a Samsung T229HD Monitor. After searching a little I found the answer and it is: "In fact you just pull it out. It requires a\015\012disturbing amount of force, considering the frame is largely plastic,\015\012but it w ... HP vs19 (Silver) 19" LCD Monitor

All I get is a white screen


Copied from http://www.fixya.com/support/t190380-turn_screen_displays_whiteI have a Samsung Syncmaster 175v Mfg Oct '03 displaying the __ White\015\012Screen . I removed the screws on the back , removed base stand,\015\012separated case w ... Samsung SyncMaster 175V 17" LCD Monitor

Ground Noise Problem Possibly Attributed to Samsung Monitor


Do you have another power adapter to try? Sometimes those go bad, and are pretty cheap to test out (around $35-$50). Otherwise it is the DC-in board on your PowerBook. I replace about 2 of those per month with our clients up here on the PowerBooks ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

I'm having a problem assembling my Samsung 2033 sw monitor. The directions are horrible and I don't want to snap the base.


I bought a Samsung 2033sw Monitor and I couldn't get the base attached to the monitor. When I returned it to Best Buy their "geek" \015\012technicians discovered after opening another new monitor that\015\012the spindle was attached to t ... Computer Monitors

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Pincushion and Horital Size Problems


This is a hardware based issue, and sadly cannot be fixed without sending it to a service center. If you really want to, you can send this monitor to a service center, but it will be around 100 bucks to fix. I would say just replace it with a smaller ... Samsung SyncMaster 753 DFX 17" CRT Monitor

How do you remove the base stand on T220?


I'm pretty sure this monitor is not VESA compatible (aka not compatible with wall mount) ... ... Samsung T220 22" Widescreen LCD Monitor

Gateway monitor (FDP1965) Power/video problem


You have a problem with your lcd..get it fixed by technicians... ... Gateway FPD1975W 19" LCD Monitor

My loptop is an Averatec 7100. How can I test the motherboard? I took it to a computer repair shop and they said is the motherboard, I want to know how can I test it on my own.


This is more of a system diagnosis that an actual motherboard testing procedure, but since all components attach to the motherboard in one way or another it could count as a prcess of elimination......\015\012\015\012 ... PC Desktops

Need Base part for Samsung 740N LCD monitor


I have a base, let me know wehre you are located and maybe we can figure out if you pay for shipping I will send your way. I have the monitors wall mounted so I do not need the base.Contact me at [email protected] ... Samsung SyncMaster 740N 17" LCD Monitor

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

Mag monitor doesn't display bios post


The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors

Removing oil-based primer from LCD monitor screen


Paint thinner is about the only thing that could be safe for most plastics. but as its dry that will not likely work.try some extra virgin oil or penetrating oil and rub it into the dots.if you can get it to take the oil then it will come ... Computer Monitors

Acer 1717 monitor- removal of base


At the base you want to remove - in order to pack the monitor - if you se at the rear left and right there are a tiny opening about 3 cm long,put inside a screw driver and it will open very easly the plastic cover.Then inside there are four screws,tw ... Acer Al2416WD LCD Monitor

Hpcompaq d330 ut has no in put singnal to LCD screen ? is this big trouble to fix as in cost a lot??


Let's check the obvious first...\015\012Make sure monitor cables are attached correctly and securely. \015\012Is the monitor receiving power/turned on?\015\012Assuming monitor was working at some point and not damaged...\015\0 ... HP Compaq d330 (DG315A) PC Desktop

Cannot find VESA holes...Samsung Syncmaster 970p


I have looked at the specification for this, and although it does show as being VESA compatible (This is a display standard)\015\012\015\012There is no mention of any "wall mounting" capabilities at all, which would lead me to believe that this is no ... Samsung SyncMaster 970P 19" LCD Monitor

My 20" Samsung LCD Monitor switches on and immediately off


Hi this is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After it goes off, you\015\012check that you can see the image on the screen by shining a flashlight into the\015\012screen, not directly but ... Computer Monitors

No picture on monitor 997M


One reason that this is happening could be that it is on Power saving mode. This happens when the LCD monitor detecs an incorrect timing then thats the time that the LCD goes blank and the power botton starts to blink.\015\012\015\012what ... Microtech Computer Monitors

So I hooked this moniter up to my hp and all I get is two blinking lights


\012One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can selec ... HP A4331D 20" CRT Monitor

Type and size of screws to attach wall mount to viewsoni 17" lcd


When you take the base off you will find those screws and those are the same size to use for your back panel.The back cover pops right off where it covers the base screws. ... ViewSonic VE710b 17" Flat Panel LCD Monitor

Samsung LCD Monitor SyncMaster 203B


Hi this is the way how to examine\015\012what's wrong with your LCD monitors. After you turned it on and the screen\015\012blacked out or stopped working, you have to check that if you can see the image on the screen or\015\012not by shining a ... Samsung SyncMaster 203B LCD Monitor

Connecting 2 monitor and tv


Multiple monitors overview\015\012\015\012\015\012On many portable computers and some desktop computers (those with two video \015\012ports on one video card), you can expand your display to a second monitor by using \015\012Dualview. Dualview is ver ... Computer Cases
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7908 seconds