Having problems with your Samsung 226BW Monitor ?

I have a samsumg 226bw that is acting up. When I turn on my computer, the monitor blinks once to show that the computer is booting, then after that no display. If I turn monitor off and on again, the display shows only for about a second and then nothing. I cannot see the menu or anything. what could be wrong?


Answers :

You could have a faulty inverter board or faulty CCFL lamp.
\015\012Check out LCD Parts for service, parts and DIY info - click on this link to their WEB site. :-
\015\012www.lcdparts.net
- This is how it went for me..I have a Samsung SYNCMASTER2.gif 2053BW. I leave my monitor on and let it hybernate when I shut down PC. I'm 3 months outside of my warranty. Two weeks ago something started happening. I boot PC and video doesn't come up for 10 minutes, and when it came up it worked perfect. VC/Monitor/MB?? It became 20 minutes and ...now..I have the analog/digital box in top left screen, power light on monitor flashing, no menu available on monitor and none of the other buttons work for anything. I test the monitor on Laptop..nothing(same as above)..I break out the old(working) monitor from deep within the closet. Plug it in and I'm up and running. So...

HOW TO OPEN A SYNCMASTER 2053BW

NO SCREWS!!! Assuming that the stand mount has been pulled out..The seam around the screen frame is where you start. The frame has the prongs, the back cover has what the prongs slip over.The frame is coming off first! I got the side to open by finger, then used a small standard screwdriver to pry ever so gently(lifting frame from rearcover). Leave the power button assembly on the frame, pull wire only a little to relax any tension..you get about 3/4" in extra taped to panel. The hard part is done.;) Still holding the frame...Now lift the panel (where the power button assembly wiring goes under panel) with the power housing that is under it as a whole and you will see where the powerbuttonassemble detaches.Remove frame. Now..holding edges of panel into back cover, lift and flip the whole thing over and place panel face down on a perfectly flat surface..a towel on my desk works. Lift and remove back cover.Your now looking at the back of the board housing. The ribon is simple, on the panel end of the ribon, squeez the outer clips together and slide it away against the panel..The secondary tin plate is removable, two clips super close to where the sets of wires come around the housing and into the panel.Unhook the 4 plugs(pink inside/blue outside)...Now lift the power housing off of the panel. The big board has the power. One screw to remove a ground plate first. Two screws to remove power board. Pics from phone.56ec44b.jpg
aae8fab.jpg
Reassemble but DO NOT re-snap the frame into place....yet... Test it! There is a reason the caps got hot in the first place, therfore it has a good chance of happening again. This is not fullproof...but.....mine has been on now for a day with no glitches whatsoever. So I have resnapped mine back together. I hope you can too.\015\012 \015\012\015\012- I must also add that this is one of the best producing monitors I have ever seen...in 60hz. The clarity is top notch. If you purchase one get the extended warranty. FYI...I paid $4.00 for those caps.
Repair Help & Product Troubleshooting for Samsung 226BW Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

3yr old got ahold of monitor


Ok, get to the event where you get this to happen "...then turn it back on the monitor does come on normally...", but just after power-up, press the F8 key to go to safe mode. If nothing visible, press ENTER anyway...get to safe mode yet? ... Computer Monitors

HP Compaq d530 SFF PC


No Ben, there is no jumper for this on the motherboard.The method is to go into BIOS Setup, and change it to AGP. (Should be the default factory setting however, IF you have an AGP graphics card installed)For your comput ... HP Compaq d530 SFF PC Desktop

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

DV8309 power up problem: blue lights on for few seconds then off


The inverter inside the lcd panel is most likely your problem. Try removing the whole lcd screen from the laptop if you are capable and run it with the external screen to confirm. leave the lcd switch off (this lcd switch above the power button turns ... HP PC Laptops

I have a samsumg 226bw that is acting up. When I turn on my computer, the monitor blinks once to show that the computer is booting, then after that no display. If I turn monitor off and on again, the display shows only for about a second and then nothing. I cannot see the menu or anything. what could be wrong?


You could have a faulty inverter board or faulty CCFL lamp.\015\012Check out LCD Parts for service, parts and DIY info - click on this link to their WEB site. :-\015\012www ... Samsung 226BW Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

How to add second monitor to asus cg5270? - ASUS Eee PC 1000H Laptop


The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob!Certain selected models of the Essentio CG5270 come with a graphics card. If you have this graphics card, you can use two monitors at th ... ASUS Eee PC 1000H Laptop

My monitor goes to sleep mode at startup & can't access safe mode


Turn the computer off, open the case and remove the RAM. Does the computer beep when you turn it on with no RAM? If not, your motherboard is dead. If your computer beeps, turn it off again and try putting one stick of RAM in. If the co ... E-Machines eMachines Desktop PC

So I hooked this moniter up to my hp and all I get is two blinking lights


\012One monitor serves as the primary monitor, and this monitor displays the Logon dialog box when you start your computer. In addition, most programs will display windows on the primary monitor when you initially open them. You can selec ... HP A4331D 20" CRT Monitor

I have a flat screen tv and monitor combi i want to add


Yes, it should be possible. I need to ask if you connected your PC through the DVI or RGB input from the back of the computer to the TV. There are 2 main connections for computer monitors. One looks like a plug with 15 pins in 3 rows of 5 (RGB) and t ... PC Desktops

Should I go for repairs?


Most reputable repair shops will tell you if it can be repaired and how much it will cost. You can then chose to repair or replace based on their estimate. You should not have to pay for this service and should get second opinion if possible. Many ... MegaVision MFV141 14" LCD Monitor

LG 710s monitor problem screen turns green


Your AUTO settings button is stuck in! Try tapping on it a few times. Otherwise you may have to take the frame apart so you can get at the button. ... Amptron AMV 17V5 17" LCD Flat Panel Display 500:1Analog 15-pin D-Sub, Digital 24-pin DVI-D Silver with black... Monitor

The l226wtq goes black


Try shining a flashlight on the screen, or without the flashlight, try to see if you can distinguish anything on the screen at all, if you do, the backlight is dead, or the monitor has an internal most likely unfixable problem. ... PC Desktops

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Monitor has no red in it


Hey Ya'll,Bad news. I have the same set up with the same problem and it's awful. The odd color of the monitor is due to a bad nVidia GeForce 6100 video card. You'll have to cough up the cash for another PCI graphics card. Also, the FP ... Gateway FPD1975W 19" LCD Monitor

Gateway FPD1530 loses image shortly after powering up.


Try booting into safe mode. press F8 while the computer is booting. see if everything stays normal. It should tell you that it booted into safe mode. Once there, change the resolution or the frequency of the display(also known as the refresh rate) by ... Computer Monitors

My computer wont boot up the fan and light turn on for a second then goes right off....


Follow these steps to determine why your computer won't turn on.\015\012\015\012Computer shows no sign of power ... HP Pavilion dv9000z Notebook

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

HP m7060n Media Center PC had boot problem: now won't display any


Lets try to repair it using the windows installation disc. First things first, look at the motherboard down on the right lower side. I would like you to find the CMOS jumper, it will be three pins sticking up with a plastic jumper made of plastic fit ... HP Media Center m7060n PC Desktop

Monitor control lock problem


Replace the small 78L05 regulator 5V supply to micro. ... Computer Monitors

Connecting 2 monitor and tv


Multiple monitors overview\015\012\015\012\015\012On many portable computers and some desktop computers (those with two video \015\012ports on one video card), you can expand your display to a second monitor by using \015\012Dualview. Dualview is ver ... Computer Cases

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0660 seconds