Having problems with your Proview PT 500 Monitor ?

Have a proview pt500. on powerup i get a backlight but no OSD wh

\015 When i push the large button on the base. anything\015

Answers :

Repair Help & Product Troubleshooting for Proview PT 500 Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have a proview pt500. on powerup i get a backlight but no OSD wh


... Proview PT 500 Monitor

My emachines monitor has no picture, hard drive is functioning properly. Monitor is black


If you do not get a screen with a LCD monitor its likely you have a inverter problem or BACKLIGHT problem. you might need to replace the LCD backlight or replace the monitor on the desktop.\015\012check to see if the laptop can get a picture by ... PC Desktops

Screen is dark... you can see and interact with screen, but too dark too make out clearly, brightness and contrast set to highest level on osd! is there a backlight that can be repaired?


This can mean either a bad backlight or inverter. The backlight is dificult to get to on most lcd screens, it is in the screen itself and trying to take apart the lcd's layers usually ends up a broken lcd. Luckily the problem is usually the inverter, ... Xerox XA3-17B 17" LCD Monitor

Gateway FPD1530 Backlight turns on, but no display


Has to do with power i can get myin to stay some times but then the same thing hapens to me u have to buy a new power board wich is esy to replace and i have had min as a second screen for like 4 or 5 years now with no probloms so its just from over ... Gateway FPD1530 15" Flat Panel LCD Monitor

PROVIEW PL-456S LCD MONITOR TURNING PINK ON ONE SIDE


Chances are that you are not hurting anything with the lower power supply. What is probably happening is most likely two fold.\015\0121. The light bulbs in the backlight circuit may just be wearing out and need replacement, and\015\0122. the lower cu ... Proview PL 566s 15" Flat Panel LCD Monitor

Kds just two seconds


This is a common problem across many monitors, unfortunately. The problem stems from one of two things, typically. It is either the Power Inverter board (Inverter Mirage Electronics AD-1700 Rev:F 200-000-170DTL1 VERSION:A) or a weak or dy ... KDS K717s 17" LCD Monitor

Monitor displays white screen when connected and powered.


Does the OSD settings menu work or (say, contrast) controls work? It could be a control circuit that somehow gets as far as switching the backlight on but can't get the video detection or further (resolution data interchange, etc.) stuff going. Th ... Hanns.G Corporation JW-199DPB 19" LCD Monitor

AOC LM700 17" LCD Screen switches to black and then comes back to normal. Power light never goes green but monitor works. LED is orange when off and in sleep mode, wakes correctly on getting input. Just flicks on a black screen after a while of being on and them flicks back to normal. Several posts are similar that point to an inverter issue but they all seem to get a green light. I have removed the inverter board and will redo the solder connections as has been suggested for somewhat similar is


There is a known issue with these monitors, which cause symptoms including the display blacking out after warm-up, flickering, and a configuration error displayed on the osd. the cause is the mpu chip, which aoc now has a revised issue- although ge ... AOC LM 720 17" Flat Panel LCD Monitor

19" Proview 900p lcd monitor backlight


Change the capacitors (all but maybe the main should be done- if you\015\012change just bad ones now, the others will take the heat and go soon).\015\012They do not have to be bulged or leaking to be bad.\015\012Then if that doesn't help, shoot ... Gateway FPD2275W LCD Monitor

Capacitors??? WOMAN NEEDS HELP PLEASE!!!???


The term: "it has no power" is not specific enough. If the actual led indicator light on the front of the monitor lights up with a green color, then goes out or starts flashing, then maybe, perhaps the problem with the monitor is that the high voltag ... Computer Monitors

Screen goes dark after a few seconds


I think you need new backlights, if it was the inverter or power supply (the same in this case), it would not come on for that long, even 4 or 5 seconds. This unit has four 2mm x 405mm ccfl bulbs (cold cathode fluorescent light) two on top and two on ... Proview PL926WBi 19" LCD Monitor

19" proview LCD monitor light and signal


How old is this thing? Mine is about 4 or 5 years old... junk it! ... Proview PL926WBi 19" LCD Monitor

Proview The screen goes black after you turn on the tv but the sound stays


One or more of the Cold Cathode tubes that illuminate the lcd backlight may be bad. i have the 19" and it has 4 - 2mm X 400mm tubes (two at the top and two at the bottom). One of them quit so to test it out i temporarily replaced it with one from my ... Proview PL 566s 15" Flat Panel LCD Monitor

Dark scree My Samsung SyncMaster 170MP screen has darkened considerably. I can see the screen icons and images but they are dimmed a lot. It was OK until I lost power. When the power came back, for no appearant reason this condition was present. NO settings were changed. When the brightness is adjusted up or down, nothing happens to brighten or dim the screen. My Questions is: How do I get the screen to brighten up back to normal levels? Please help.


I too have the same problem with the same monitor.. tv looks great OSD looks great.. pc is dim.. This has nothing to do with the inverter board or the backlight.. I believe that there is an issue with the components that render the Computer video. ... Samsung SyncMaster 17" TFT LCD Monitor

I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?


The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor

No power when first plugged in the power light blinks


Ok I have posted a fix for this but I will do it again it will require some soldering technique unplug the unit from the wall and the computer and set it down on its face(lcd side down) open the back of the unit and disconnect the lcd unit and the ba ... Proview PL913S 19" Flat Panel LCD Monitor

Our LG flat screen l192ws is saying OSD lock and the screen is completely black. You can see through the screen though by shining a light on it... how do we get the brightness back?!!!!


The backlight inverter board amy have gone out or bad capacitors in the power supply, which is more likely.\015\012http://en.wikipedia.org/wiki/Capacitor_pl ... LG Flatron L1515S 15" LCD Monitor

Laptop screen not working


Hi, I'm a laptop technician and if the screen is blank as in there is nothing showing on the screen at all (even when the laptop first starts up), but the laptop sounds like it is starting normally then the backlight or invertor for the laptop screen ... Acer Aspire 5002WLCi Notebook

Screen not working


Hi, I'm a laptop technician and if the screen is blank as in there is nothing showing on the screen at all (even when the laptop first starts up), but the laptop sounds like it is starting normally then the backlight or invertor for the laptop screen ... PC Laptops

Viewsonic VP2130B no Video


First off, on these monitors, usually the power board is also the inverter board. If its not on this model monitor, and you know that by opening it up and seeing the backlight cables connected to a different board, than that may be the problem, but i ... Computer Monitors

I have a Cornea 1702. It just stopped working altogether. It doesn't even show the menu nor does it search for a signal as it used to while scrolling thru options or select input! I think it's fried, but I remember some time ago i thought it was all done then it started working again. any thoughts?


OK, first off, I'd like to say that I've never worked on the Cornea 1702, but most monitors follow similar designs, especially generic brand monitors.So there are a few things I need to know: What exactly happens when you press the ... Cornea CT 1700 17" Flat Panel LCD Monitor

Dell Inspiron e1505 Backlight issue


When you leave the computer for a long time inactivity it goes to hibernate or standby\015\012you can change it on control panel power options ... Dell Inspiron E1505 Notebook

Sharp Actius A250 PC: Can the screen be replaced?


I'm a laptop technician and this is a very common fault. It sounds like the backlight or invertor for the laptop screen has failed. \015\012\015\012The easy way to check this is to plug the laptop into a normal PC monitor (if you can) via ... Sharp Actius A250 Notebook

Hi, i have this acer 1912 19" lcd monitor, it won't turn on (actually it will turn on if i wait for a few hours). if i unplug the vga cable and press the power button, it will display "acer "and then "no signal" then goes to standby(orange light). but if the vga cable is plugged in and i turn it on then it will display "acer" and then nothing, and i have to wait for hours for it to be back to normal. any suggestions please


That's kind of interesting that it comes on after a few hours; what changes during that time, I wonder?  I also wonder what changed since it worked last, for example a power-manager utility on the computer side which isn't quite compatible with ... PC Desktops

The display on myy HP dv1000 laptop went black.


In addition to the Inverter (which is the power supply for the backlight) the backlight itself often fails (I've only seen one Inverter failure out of about 30 systems I've repaired with this problem, the lamp itself is first suspect). This is a job ... HP Pavilion dv1000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9349 seconds