Having problems with your Proview PT 15.1" LCD Monitor ?

Monitor goes blank after first few seconds of turning it on...

\015 You can turn it off and back on, then it goes blank again??? If you unplug it for a few minutes and turn it on , it will stay on several more seconds before going out???\015

Answers :

There's an internal electronic part/s of your monitor that are cold soldered / defective. I suggest to bring the unit to an authorized service to properly diagnosed & fix the problem. best regards
Repair Help & Product Troubleshooting for Proview PT 15.1" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

Screen suddenly goes blank


When you open your pc now,do you still hear a click sounds like you hear before ,when your computer has no problem yet? now there is no sounds .do the ff..\015\0121.try to press the numlock key and observe it ,if the indicator LED lite on and ... Samsung SyncMaster 551 15" CRT Monitor

Monitor displays breifly then goes to blank screen


Well my Acer AL1711 finally gave up in as much as the screen flashed briefly at switch-on then went blank, regardless of brilliance setting so I decided to take it apart and try to fix it. The good news is that IT WAS NOT THE LAMPS that I feared in m ... Relisys RLT1720 17" LCD Monitor

Monitor displays breifly then goes to blank screen


Hi this is the way how to examine what's wrong with your LCD\015\012monitors. Power on both CPU and monitor. After going blank, you\015\012check that you can see the image on the screen by shining a flashlight into the\015\012screen, not directly but ... Gateway FPD2275W LCD Monitor

Monitor goes blank after first few seconds of turning it on...


There's an internal electronic part/s of your monitor that are cold soldered / defective. I suggest to bring the unit to an authorized service to properly diagnosed & fix the problem. best regards ... Proview PT 15.1" LCD Monitor

Monitor goes blank after 2-3 seconds


Could be hardware failure but i would try buttons on front of monitor first. notice, usually green led on monitor is green, if it goes to amber, you are loosing sync pulse. ... Computer Monitors

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Screen Not Staying On


Hi TontBrowne,\015\012\015\012I'm not sure exactly what causes this problem. However it seems that lowering the 'Brightness' and 'Contrast' fixes things. The problem is, you can't see the menu without the backlight. However, try this, as ... Dell Dimension 4600 PC Desktop

Monitor screen comes on when computer is first turned on but goes blank within a second. If I turn the monitor off and then on again the home screen appears but then goes blank again. What could be the problem?


Hello,\015\012\015\012You have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of he monitor. ... Dell E173FP 17" LCD Monitor

My monitor shows a blank screen .But when I press the RGB, DVI button, I can see my desktop for a second then it stops displaying. I have to keep pressing the button to change the display type in order to see any screen, but it only lasts for a second between button pressing.


Moneyshaker, Maybe your screen (LCD panel) is not blank, just BLACK!!! First thing to do is the flashlight test! With monitor connected to a KNOWN GOOD fully booted pc with WIN-desktop showing, reconnect N9 lcd to pc. Then and only then turn on N9 lc ... Scanport N9 19" LCD Monitor

Dell monitor keeps turning off...


I have a similar problem, except if you look very closely, from an upwards angle, it isn't off, but on the darkest contrast setting. The Dell monitor that I am using has 4 buttons in the bottom right corner. The first is silver, the second is silver ... Dell E193FP 19" LCD Monitor

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Vaio fj270 wont boot to windows stuck with a blinking underscore


Hello and thank you for using Fixya!\015\012\015\012First, check and make sure there are no CD's in the CDrom player. Also, check an make sure there is no external storage devices, such as a flash drive, external, etc.\015\012 ... Sony VAIO VGN-FJ270/B Notebook

Screen goes blank


Check that the power cord is fully plugged in first.It is probably the inverter board inside the monitor.(if the screen does properly display ever then it is not the screen)It CAN be fixed but I do not suggest anyone open up a ... HP vs17

It keeps going blank


Hello,This is a very common problem with LCD monitors of that age. The heat buildup in the case has cause parts in the power supply called capacitors to blow and short out the power supply. If you can solder you should be able to do the r ... Computer Monitors

Green light comes on for a few seconds then turns orange


Hello,If you have a popped cap then the mosfets are blown. They blow as soon as the cap shorts and pops. You need to replace both mosfets and the 220uf caps and test the fuse with a multimeter I would bet its blown too.Buddy ... Acer AL1916W 19" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Hi, my TW-191 suddenly quit working yesterday. . . it is only 2 years old? When the PC is first turned on the amber light turns green and the screen is displayed then after a few seconds goes blank. Through various trial and error checks I've discovered the when I disconnect the VGA cable and reconnect it the screen will reappear again for a few seconds before going black??? Is the monitor toast? BTW, I've tested my PC with a spare monitor and it works fine.


Hello,It sounds like you have a monitor with a common problem. After a few years some LCD monitors\015\012will blow a power supply. The problem is caused by parts called\015\012capacitors overheating in the confined space of the monitor. ... Hannstar I-Inc TW-191D Monitor

Monitor displays breifly then goes to blank screen


The green power light indicates that the monitor is receiving from the\015\012computer correctly. I suspect it is going into high voltage\015\012shutdown. There is a safety circuit that monitors the high\015\012voltage and shuts the monitor down if ... BenQ FP731 17" LCD Monitor

Monitor displays breifly then goes to blank screen


The power -inverter board probably needs an overhaul.\015\012I redo many of these.\015\012If the screen was pinkish or flickering before it finally got to this point, it is possible that a bulb has gone bad.\015\012Fran ... Proview PL926WBi 19" LCD Monitor

Lcd monitor will turn on for about 2 seconds then go blank.


Butterx99, First thing you should do is surf the net for pics of swollen electrolytic filter capacitors. You will find many, many examples. You will also need to inspect both the switch-mode-power-supply and the inverter boards for failed thermally c ... HP w1907 LCD Monitor

Screen Goes Blank


Ive seen this on other monitors. Look for a 1 and 2. Some monitors do NOT auto detect a signal, and this one might not. Look for a way to set the monitor from Digital input to VGA input. Try that and see. ... Dell E173FP 17" LCD Monitor

Screen stays blank


I'm seeing the same problem as the original poster. that delaying the power-on helps, seems to be related to the video mode - it fails in the vga text mode the bios boots up with, but works fine with the later activated graphics mode. switching to te ... iiyama Vision Master Pro 450 Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8607 seconds