Having problems with your Proview PL913S 19" Flat Panel LCD Monitor ?

No power power one day, none the next. Replaced power cord still nothing. No light on front of tv indicating on or standby.


Answers :

If you are technically able, you could replace the power supply capacitors on the power supply circuit board in the monitor. This takes a little skill with a soldering iron and purchasing 105 degree capacitors of the right value. Do be cautious of the capacitor direction, and be careful of the 160 volt supply and the 1000v supply to the backlight. Don't void your OWN warranty.
Very cheap to do to see if the monitor can be saved.
Repair Help & Product Troubleshooting for Proview PL913S 19" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Tv does not turn on


When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try first leaving the TV power cord unplugged for some times, let say one hour or so.\015\012 ... Zenith L13V36 13" Flat Panel LCD Monitor

Front panel lights blink on/off once per second


Hey,\015\012 I would like to agree to the diagnosis that you have done on the monitor . Thanks for a well complied solution. You can try the following website\015\012 ... Dell UltraSharp 2005FPW 20.1" LCD Monitor

No power power one day, none the next. Replaced power cord still nothing. No light on front of tv indicating on or standby.


If you are technically able, you could replace the power supply capacitors on the power supply circuit board in the monitor. This takes a little skill with a soldering iron and purchasing 105 degree capacitors of the right value. Do be cautious of th ... Proview PL913S 19" Flat Panel LCD Monitor

LG1717S - Power light flashing - no image.


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG L1717S-BN 17" LCD Monitor

VX922 monitor, blank screen, blinking power light


\015\012If there is a flashing led on front of the monitor, that indicates a fault condition.\015\012\015\012The flashing light indicates a diagnostic state called protection.\015\012When the Monitor goes on protection there a ... ViewSonic VX922 19" Monitor Flat Panel

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th


Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

When I turn the computer on I get a buzzing noise and it won't boot. I press the power button and lights 3 and 4 are illuminated on the front. Fan is active, screen power light goes orange. When I press the power button again it instantly turns itself off. Any help gratefully recieved!


The LED lights on the Front Panel are Diagnostic Lights.LED's 3, and 4 being illuminated, indicate a problem with the ram memory modules (Sticks), according to Dell.This is Dell Support, and the Service Manual main menu, for t ... Dell DimensionTM E520 PC Desktop

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

We recently had to disassemble our entire system. Now after moving the system, the tower lights but does nothing but blinks. We've tried detaching the power cord to reset it but that didn't help.


Perhaps the Ram Memory module/s, (Stick/s) are not fully seated in the ram memory slot/s. (Don't know if you have one, or more ram memory modules)Even if they appear to be seated by a visual inspection, the best method is to r ... Compaq Presario SR1103WM-B (PC183B#ABA) PC Desktop

Gateway 900g Hi I have a Gateway 900g monitor that does not work. All was fine working until one day it just stopped working. It wont switch on or anything. I think it may be the power supply board but I cant seem to find one anywhere and I read that you fix them. If so then how much would that cost and how do I go about it. Regards Adrian


I'm writing this using a recently repaired Gateway 900g. You may be correct about the power supply, as that was the problem on this unit. There was absolutely no response with this unit. No blue LED, no dim display. Nothing.\015\012\0 ... Microsoft ChiMei CMV938D 19" Widescreen LCD Monitor

Acer 1912 monitor that ceased to function


My monitor started to flash for 3 or four minutes before starting up, this was after three good years of faultless service. (I've always found Acer monotors to be excellent value) I was just about to purchase a pair of new monitors online when I deci ... Acer AL1912 19" LCD Monitor

Zenith L13V36 When I turn-on the power button to my 13" television, the screen goes on for about 1/2 second with no sound or picture (it's just black, but you can see the channel number in the upper right hand corner), then it automatically shuts off. What to do? Thanks so much for any assistance.


That sounds like a bad power adapter, a bad inverter , or a bad controller board.When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try fi ... Zenith L13V36 13" Flat Panel LCD Monitor

Laptop does not power up or turn on anymore!


You seem to be in deep trouble.. It sure seems to be a motherboard issue. I will advise you to buy a new MBD. And to your relief, the data on harddrives will be "nil" affected by the motherboard change.There might be an easier ... Gateway MT6707 Notebook PC

Acer extensa 4420 won't start


I had problems getting an Acer Extensa 4420 to boot or to enter bios. It would never complete the post. After taking it apart, changing the CMOS battery and making several other adjustments I read that a faulty DVD would cause the problem. I remov ... Dell Inspiron 6000 Notebook

DELL Inspiron 5150 isnt booting


If it doesn't respond at all with no ram or hdd, it is likely that the board is in fact dead.....sorry. When you say you found a broken pin, I assume you mean one of the contacts from the power jack to the main board had a cracked solder joint and yo ... Dell Inspiron 5150 Notebook

My sceptre monitor S1902D won't turn on just stopped


If the monitor has no power at all then you have a dead power board, or\015\012a broken power cord, test also a different wall AC outlet.\015\012\015\012If instead there is a flashing led on front of the monitor, that indicates a fault co ... Sceptre S1902D 19" LCD Monitor

Monitor dead - Philips Computer Monitors


If the monitor has no power at all then you have a dead power board, or a broken power cord, test also a different wall AC outlet.If instead there is a flashing led on front of the monitor, that indicates a fault condition.The ... Philips Computer Monitors

Solid amber light on front amber on mother board


Ok, well this is going to be a multi step troubleshooting.\015\012Also, anytime you are working on the inside of the computer, do unplug the power cord, and wait for the little light you see on the motherboard to go out (little amber light). ... Dell Dimension 4300S (Refurbished) (4300SB8BZ411) PC Desktop

I have the same problem!


Hi Robert,\015\012\015\012The monitor is on protect mode because an internal fault had been detected.\015\012\015\012To start unplug monitor from power and from computer and test computer with different monitor to find out if it is ... Microtek C893 18.1" Flat Panel LCD Monitor

My compaq presario x6000 will not power up at all. I have replaced the power cord and the battery and still no success. I have heard that this is a common problem. Is there a common solution? Originally it worked fine and then one day it didn't. The power indicator light would come on but the charge light would not. After more than a day of letting it stay plugged up, I realized it wouldn't charge. Thus the purchase of the new power cord and the new battery.


What if the motherboard was already replaced. I actually just had this problem after replacing the motherboard with a new one. ... Compaq Presario X6000 Notebook

Gateway MT3421 Laptop start-up Issues


Start by removing the battery completely, and plugging the power cord into the wall socket. If the power indicator light comes on at the converter on the cord, your power cord is fine. Then plug the power cord into the computer. If the computer star ... Gateway MT3422 RTL Notebook

Not getting on


 Ensure that all cables are correctly connected and pushed in firmly. On some systems the mouse and keyboard connectors are very similar and next to each other. Ensure that the mouse cable is plugged into the mouse socket and the keyboard cable ... HP Compaq Presario V2000 Notebook

I have an Acer Aspire 5100 and on the front is an indicator light next to a light bulb icon and it never turns off, how can I turn it off?


Hi-I have 2 of these 5100 notebooks-indicator lights are as follows -left is bluetooth next one is wireless lan, next one is power on,and the last one is battery. only way I know is to unplug it when not in usand the light will go off. if plugged in ... Acer Aspire 5100 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0828 seconds