Having problems with your Proview PL19Wb Monitor ?

When i cut on my monitor it goes out after a few seconds.The power is still on but it goes blank. Also when its on, the whole screen is a pink tint.my video card is fine i have duel monitors.but my wide screen keeps doing this.I replaced the power supply and no change.any ideas?


Answers :

Tried self test on monitor unplug the data cable from the tower and turn on the monitor only ans see if the problem persist then u need to change the monitor if it works fine uninstall the video drivers and reinstall it or try onboard display if possible
Repair Help & Product Troubleshooting for Proview PL19Wb Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

When i cut on my monitor it goes out after a few seconds.The power is still on but it goes blank. Also when its on, the whole screen is a pink tint.my video card is fine i have duel monitors.but my wide screen keeps doing this.I replaced the power supply and no change.any ideas?


Tried self test on monitor unplug the data cable from the tower and turn on the monitor only ans see if the problem persist then u need to change the monitor if it works fine uninstall the video drivers and reinstall it or try onboard display if poss ... Proview PL19Wb Monitor

Gateway LCD powers on but has no picture


I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

Monitor keeps blank even the power lLED is on green


Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Screen light goes out but image is still viewable...


Hello..Now let's discuss what we\015\012should do when the laptop seems to be booting up without problems, the\015\012hard drive spins appropriately, and we even hear the welcome sound of\015\012the operating system, but we have no ... Sony VAIO Notebook

No connection from cpu to screen.


By working fine, I assume you mean the monitor goes into its test/diagnostic displays. If that is the case, most likely your roommate has hit upon more or less the correct deduction. Two possibilites should be attempted before assuming to much ... Compaq Presario 7594 PC Desktop

Monitor cold start issue only as #2 monitor


The start up problem is common and will only get worse. Call Samsung as these monitors have a 3-year warranty. No receipt? They will accept your word regarding your purchase. I have\015\012two that failed exactly the same way. I called 1-800-SAM ... Samsung SyncMaster 931B 19" LCD Monitor

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Problem w/Dell E176FPf monitor stuck in power save mode


Ok if it the monitor works fine on another unit discount it out of the equation as a monitor problem.I would suspect the driver on the PC that delivers the problem, especially the video card.. Check that the cable is also on tightly. remo ... Dell E153FP 15" LCD Monitor

Monitor keeps blank even the power lLED is on green


If it's working fine in DOS, it can only be your display drivers for your operating system. What happes when you start in SAFE MODE? When you PC starts, keep pressing the F8 key, go to Safe Mode. If it works, bring the Resolution down to 800 X 600 an ... Philips Standard 104S 14" cRT Monitor

Lap top screen goes blank all of a sudden


I assume that when you dont use your computer you put it in a sleep mode by pressing sleep button ..so if this is the problem you are facing than there is nothing wrong with your video card and solution for this problem is that remove both the power ... HP Compaq nc6320 Notebook

ATI Radeon 9800xl Problem. It runs fine for about a couple of minutes then the screen goes all funny. e.g. lines and green things and you can not see things clearly.


Have you checked that the card is not over-heating? \015\012\015\012Remove the side panel of your computer and then when you can see the inside of your computer and see the card clearly, turn on the computer...\015\012\015\012 ... PC Desktops

Need to replace screen hinges - Acer Aspire 9500 Notebook


Tools Needed\015\012\015\012Fine Phillips screwdrivers, two sizes; a fine flathead\015\012screwdriver; a big heavy-duty set of locking pliers to get a grip on the\015\012barrel of the fine screwdrivers in two instances; screen wipes; a clean\015\012w ... Acer Aspire 9500 Notebook

Dell screen (1901FP) won't come out of power saver mode


Hold down the Fn and F8 keys, and it worked fine for me.\015\012 \015\012or\015\012 \015\012if your problem is you cannot wake from power saving mode (after your PC goes to sleep, then its probably just the driver for your video card). VISTA has some ... Dell 1901FPt 19" TFT LCD Flat Panel Monitor

LG StudioWorks 700s Monitor NO SIGNAL


First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

Blank Laptop Screen


Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

Screen goes blank


Hello..Now let's discuss what we\015\012should do when the laptop seems to be booting up without problems, the\015\012hard drive spins appropriately, and we even hear the welcome sound of\015\012the operating system, but we have no ... Toshiba Satellite A45-S1202 Notebook

No video Hi this is ken again, I tried everything the board seems to be booting up I tried a different video board out of my computer that I knew was working with my screen just to make sure and this video card went in the PCI slots and I tried it in all three or four slots and nothing on the screen. The monitor actually knows that the cable is connected it just goes into sleep mode while the rest of the computer is running I can see all the lights come on the keyboard the dvd and cd drives and


Ok fine i think there exists some problem in the cable connecting from the CPU to the monitor just try removing that & inserting it again ....if the same problem persists then there may be some problem in the port of the video card ju ... PC Desktops

Monitor goes black


Sorry to have to tell you this, but this is common in LCD monitors. The reason that it is going black when it boots is for one of two reasons. You either have a bad power supply that powers your LCD or your LCD's backlight is blown. These can be re ... Acer AL1711 17" Flat Panel LCD Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Initially disk boot failure now White screen but runs in oter mon


Try checking inside the computer for loose wiring near where the power supply box plugs into the motherboard, make sure that you turn the computer off and remove it from the outlet before opening it. While the computer is open, check all of the lead ... Acer AL1717 17" LCD Monitor

Monitor turns on then goes dark


Either the power supply board is failing and needs repair or a bad bulb in the screen is causing it.You would have to open it up to get a better idea.Here's some info:\015\012\015\012MAKE\015\012SURE ALL POWER is DISCONNECTED ... ViewSonic VX715 17" LCD Monitor

Dell228wfp on start up pwr on is green screen


Either the cable is not connected to the proper port or the display-source is not configured properly.Here's what you can try.\012\012Ensure that you have connected the VGA/DVI cable in the correct port. If you ... Dell E228WFP LCD Monitor

StudioWorks 700s Monitor No Signal


It could be that the resolution settings that you had with the old monitor are not compatible with the new monitor. Try hooking up your old monitor and either lowering or highering the resolution and see if that corrects the problem. Can you give ... Proview PL926WBi 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9364 seconds