Having problems with your Proview Computer Monitors ?

ProView PL716s U101 roasted

\015 I have a ProView PL716s that shuts off the video after about 10 seconds. I read some of the posted solutions, took it apart looking for swollen/exploded caps, but all caps look OK. On the main power board, U101 is roasted and U105 looks like its been hot. These are surface-mount 8 pin mini-DIP ICs, located on the opposite side of the board from transformer T102. Does anyone know anyone who sells replacement boards for this monitor (Board has label E5260357G on it), and if so, at what cost? Or is this baby belly-up?\015

Answers :

I would change the caps anyway, they're cheap. The IC's may be running hot trying to make up for the bad caps.
Repair Help & Product Troubleshooting for Proview Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

ProView PL716s U101 roasted


I would change the caps anyway, they're cheap. The IC's may be running hot trying to make up for the bad caps. ... Proview Computer Monitors

Proview PL716s computer monitor


... Proview PL713S 17" Flat Panel LCD Monitor

Proview PL716s computer monitor


I have the same problem, i just bought it from the flea market try pressing the menu/enter button it worked for me. ... Gateway FPD2275W LCD Monitor

Proview pl716s monitor will not come on


I just had this problem with my screen (proview pl716s) if you open the case and take out the power board, there are 6 470 uf capasitors bundled together and 1 220uf capasitor replace all 7 and that should fix your problem , that is what i did and i ... Proview PL713S 17" Flat Panel LCD Monitor

Need help: ProView 700P Silver LCD Monitor


You do NOT need a driver. Your monitor is broken. The high voltage power supply that provides power to light the CCFL cold cathode fluorescent lights is broken. The most common problem is that the 470uF 25V capacitors on the power supply circuit boar ... Computer Monitors

Plug and play PL716s proview monitor


After almost two/ three years my monitor is starting to give me trouble its\015\012comes on then it blinks off I have to constantly turn the power button\015\012on and off I cannot keep it on. Please help. ... Envision EN-7220 17" Flat Panel LCD Monitor

Power cord for proview monitor model Por PL716S


This link will have it....http://quail.com/index.cfm?gclid=CLuglZORppgCFQu-GgodGwZmoA.RICHARDM69 ... Proview PL913B 19" Flat Panel LCD Monitor

ENERGY SAver is stuck on


I know it's an older post, but you still may be waiting an answer:\015\012What is probably happening is Your power board is failing to maintain power enough to run the bulbs and the rest.\015\012That is why it takes long to start up and w ... Proview PL926WBi 19" LCD Monitor

Proview PL716s flashing on and off.


... Proview PL713S 17" Flat Panel LCD Monitor

SETUP OR INSTALL INFORMATION FOR PROVIEW MONITOR PL716s Model 700P maybe new drivers would bring up bright screen again. thanks, wilda vita


... Proview Computer Monitors

Proview monitor PL716s


You ave some blown caps on the vga board replace them and all will be well ... Proview PL913S 19" Flat Panel LCD Monitor

LCD display Proview


The power inverter is the problem and the only way to fix it is to replace the board. It was a poor design and my Proview 19" experienced the same screen issues as those previously stated. You'll pay $25 for shipping and up to $65 in repair costs. ... Proview PL926WBi 19" LCD Monitor

LCD display Proview


You need to contact Proview. It is a problem with the monitor. I had the same problem and I was lucky. The warranity was going to run out in 15 days. They sent me a return number "I had to pay shipping and insurance" and they sent me a replacement ... Proview PL926WBi 19" LCD Monitor

I have a Proview (Product #PRO558, Model #568). I just bought a new HP Pavilion PC and when I plug the VGA cord in from the Proview, the Proview says "No signal". However, I am using the Proview NOW with my Mac. Why won't it work with my new PC? It did work with my old Pavilion desktop???


Hello, Linda.Give this a try:Hold down the Fn key and press the function key with "CRT/LCD" or picture of a CRT (usually F4 or F8). Toggle through and hopefully the Proview will work.It also could be a problem wit ... Proview Computer Monitors

Proview 900w I bought a proview 900w monitor the other day and am having problems with the resolution settings. It did not come with a cd to install the correct driver, and when i download the driver for it off of proview website and try to update drivers, it says it is fine. But it isn't... i am currently using 1024x768 in display properties...which makes it the CLOSEST to normal looking. Everything looks stretched and horrible! how do I fix this so i can enjoy this nice wide monitor?


This prob is memory is in monitor so contact sevice engg of proview ... Proview PL926WBi 19" LCD Monitor

Looking for a Manual for 13" Proview Flat Screen Monitor


I agree, the website is not very helpful. Also a web search comes up with nothing. Why not send an email to Proview? You may strike lucky!\015\012\015\012cheers ... Proview Computer Monitors

Pl916s proview 19 inch flat screen moniter


Pl916s proview 19 inch flat screen moniter?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 i ... Proview PL913S 19" Flat Panel LCD Monitor

Does my Proview PL926WBi 19


This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any question,please let us know email ... Proview PL926WBi 19" LCD Monitor

Proview PL926WSi LCD monitor will not power up


I have the same moniter here and it looks like they are blowing the C318 and C317 capacitor on the board \015\012if i can fix this one here i may be able to fix your board if needed ... Proview PL926WBi 19" LCD Monitor

Where can you get a power supply for a proview pl916s monitor


Where can you get a power supply for a proview pl916s monitor?\012 This trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find th ... Computer Monitors

My proview 558 monitor has a 1/2 inch black line at the bottom


Ms_biguns, You need to test one or the other, The tower should output and drive a substitute known good monitor, or a known good pc should be able to display the WIN-desktop screen on your Proview 558. Could it also be that the software in pc not set ... Proview Computer Monitors

Proview monitor won't keep the screen on


Bzinbby1, Hi, I think I know what's wrong. In fact I already know what's wrong! But I want you to do one test to let me know how bad it really is! Here is the test. I want you to reconnect your Proview to an already fully booted "KNOWN GOOD" pc wit ... Proview PL913B 19" Flat Panel LCD Monitor

My monitor does not work right. it says vga not support.. its a proview 17" flatscreen..active matrix tft lcd


I suspect your Computers Display settings need adjustments and or a Driver from Proview installed...therefor if you can get on the net, I would look at FAQ's on Proviews Website, i.e:http://www.proview.net/Support/FAQ_Question.aspx?pi=202 ... Proview PL713S 17" Flat Panel LCD Monitor

I have a 19 Proview Monitor PL926WBI and it has no D-Sub cable or power cord, where can I get them realllll cheap?


Proview PL926WBi \012 this trouble maybe power supply or inverter boards is defective.\012 first you can test the voltage of the multr,and then check which part is defective.From Wisiny.com can find those parts\012 if you have any questio ... Proview PL926WBi 19" LCD Monitor

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0174 seconds