Having problems with your Princeton Digital VL1916 19" LCD Monitor ?

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.


Answers :

That is because your computer is trying to display a picture at a higher resolution than the monitor can handle
\015\012
\015\012EG. if your monitor was only capable of lets say 800 x 600 and you decided to try force it to display 1680 x 1260 your monitor would do one of three things
\015\012
\015\012try but die doing so
\015\012switch itself to sleep or standby mode
\015\012scream at you that its "OUT OF RANGE"
\015\012
\015\012The H & V numbers are horizontal and vertical frequencies sometimes it is possible to use the monitors own OSD to change these but please check in the monitor manual before you do so.
\015\012
\015\012Your best bet is to start your computer in safe mode and re-set the resolution to something a little more in the range of the monitor and then try re-boot.
\015\012
\015\012
\015\012If this information was useful then please click below
Repair Help & Product Troubleshooting for Princeton Digital VL1916 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.


That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

Problem with compaq MV 520 monitor


Your monitor is operating normally. After Windows starts it is setting the video resolution to something outside of the monitor's range. That's why you see the Windows splash screen, then the message from the monitor about the settings. Most likely t ... Compaq MV 520 Monitor

Fujitsu-Siemens P15 TFT power/picture problem.


\015\012\015\012No start-up. Clicking sound from speakers\015\012\015\012solution\015\012\015\012Replace C922 and C923 (both 1 ... Fujitsu Siemens Premium Line P15-1 15" LCD Monitor

My 15" LCD monitor TTX went to sleep mode and never return back


Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

[email protected] After sistem recovery from DVD_disk monitor remained dark. On monitor appears message: Out of Range H.frequency: 46.4 kHz V.frequency: 86.8 Hz Before those parameters: H.frequency 55.9 kHz V.frequence 59.9 Hz How do I solve it?


Ya u enable vga mode hit f8 at start up in xp select vga mode ok resets u then use 60 hertz man and its native res ok only update drivers ect mark me ask fit ya ok thx nick ... ViewSonic VX1935wm LCD Monitor

My HP vs15? flat panel monitor is driving me nuts


Think yer gnna need to first install your monitor drivers,...if it didnt come with software, then look it up online,...then install uyer video card drivers if u have a video card,..., also download the manuals,..pdf,...fer each. if u dont mind the re ... HP Pavilion F1503 15" LCD Flat Panel Monitor

I was adjusting picture on monitor and now picture completely messed up


\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

Adjusted my graphics card settings and now my crt monitor G90f view sonic is stuck with this notice in the middle of the screen ;out of range H.Frequency 9 5 KHZ , V.Frequency 6 0 HZ i am unable to reset the monitor what can i do .


HelloBoot to safe mode and and change the display mode. ... PC Desktops

Monitor out of range


Most commonly, this problem is caused by an incorrect refresh rate setting. LCD monitors typically DO NOT support refresh rates higher than 60hz - and this is no exception. Try running the game in "safe mode" if it has one. Adjusting the in-game vide ... Computer Monitors

DELL E153FPf doesn't show the image


OSD Warning Messages\015\012A warning message may appear on the screen indicating \015\012 that the monitor is out of sync range.\015\012\015\012 \015\012\015\012 \015\012 \015\012 \015\012 Cannot \015\012 Display This Video ... Dell E153FPf 15" TFT LCD Flat Panel Monitor

Unable to print using samsung print on Windows XP


To resolve this issue, follow these steps: 1. If you do not have a Lexmark printer installed, go to step 4. If you do have a Lexmark printer installed, go to step 2. 2. If the Lexmark print service is installed on your computer, turn off the Le ... Samsung PC Laptops

My Dell OptiPlex GX 520 has frozen. It runs Windows XP. Here in the UK, we have had a cold snap in what the papers are calling "The Coldest Day". Dunno if that's got anything to do with it. Anyway, I came down in the morning and the screen was off as if it had gone into sleep mode, but shaking the mouse or tapping the keyboard did not work. So, I tried turning it off and on again. The bootup screen came on, and the bar filled nearly up to the top, but then froze there. I left it for five minutes


Hello,The weather has nothing to do with the operation of your computer, as long as the computer is indoors and it is operating within a temperature of about 15 degrees and above.The problem must be on your Operating System (O ... Dell OptiPlex GX620 PC Desktop

My MS Excel vlookup function ASCII type table contains both upper case and lower case letters, characters like ( and % or *, and numbers. It seems to return the numerical equivalent of upper case letters only, not the lower case, and fails on numbers, returning #N/A. The upper case letters and most of the other characters work properly.


Correct a #N/A error\015\012\015\012\015\012Show All\015\012 ... PC Desktops

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Attention out of range is displayed on ibm 2 74 monitor


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... IBM E74 17" CRT Monitor

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Nortel NetDirect error on Vista


Hi kt_rutherfor, Firstly apologies for my late reply. I thought that this was going to be a firewall problem, but looking at your error again, I now dont think that. So I'm afraid that I dont know the answer to this, I do have an idea, after research ... ASUS T3200 Notebook

Dell E152FP monitor goes black at startup, but not permanently


My bet is that your monitor is on it's way out. If this is true, it will get worse until it gets to a point where it no longer works at all. Connecting the monitor to another computer should confirm my suspicion. The monitor has probably developed a ... HP W2007 LCD Monitor

Monitor keeps stating "monitor going to sleep" now awhile after booting up. The monitor works fine with other computers and the computer in questioning when in safe mode - yet if tried to boot normally, the monitor says going to sleep. Recently, I used that monitor to work on another PC but didn't touch the now affected one - but after plugging it back into the old one.. this is the issue


This is probably a video setting issue. In Safe Mode, Windows starts with low resolution and color settings, so the monitor can display them. But when it tries to start normally, Windows is using a video setting the monitor can't handle.S ... Compaq FS7600 17" Flat Glass Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.


It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

Monitor goes to sleep and won't wake up


... Mag Innovision LT776s 17" LCD Monitor

RectangulaR box on my screen says: input not supported


If your monitor is displaying a message, that's good news: Your monitor is not shut. What the message is saying is that either the refresh rate frequency, or the resolution you have set your video card to on your pc/laptop, is too high for your LCD ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6910 seconds