Having problems with your Princeton Digital VL1916 19" LCD Monitor ?

Princeton Monitor is "out of range"

\015 I have a princeton monitor that is displaying "out of range" I have check all cables and everything is plugged in. Please help!\015

Answers :

The monitor is not getting a video signal. This is probably an issue with your computer. It could be a memory, hard drive or motherboard issue.

Make sure you are getting power to the pc (fans running, hard drive spinning...etc). Then check your memory. Try switching memory slots, or try different memory.

Turn on computer and see if you hear any bios beeps.

Try a different hard drive if you have one.

Good luck,

Repair Help & Product Troubleshooting for Princeton Digital VL1916 19" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.

That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

Princeton Monitor is "out of range"

Hi,The monitor is not getting a video signal. This is probably an issue with your computer. It could be a memory, hard drive or motherboard issue. Make sure you are getting power to the pc (fans running, hard drive spinning...etc ... Princeton Digital VL1916 19" LCD Monitor

At start up it displays a message "frequency out of range" please change the display mode to 1280 x 1024 with 60Hz, any idea why its doing this and how to solve this issue so i can log back on to wind

Ok you may do soluton #1 make monitor show windows start. then enter windows-->enter control panel --> display--> setting --> monitor -->\015\012choose the refrash frequency to lower stage (at least 60 Hz)\015\012until no m ... Princeton Digital VL1919 19" Monitor

Princeton APP530 monitor black screen after seconds

But it is really a electronic problem the is some bad diodes and capacitors and some rewellding issuses shoud be done in your monitor ... Computer Monitors

Upon startup a gray box appears reading "frequency out of range"how do i fix it? 95kHz / 120 Hz Please change it to 1280 x 1024 with 60. i have set the computer up with another monitor and it works just fine. its a Princeton VL1919. 2004

Reconnect the "other" monitor.\015\012Right-mouse click anywhere on your desktop "wallpaper".\015\012Click Properties.\015\012Click Settings.\015\012Move the slider to 800 by 600.\015\012Click Advanced.\015\012Clic ... Princeton Digital VL1918 Monitor

Need help for my Dell Inspiron 9400 Laptop

Try and determine what is wrong with your LCD screen first and you can then decide the best course of action. Follow these instructions to determine the fault and then check out LCD Parts WEB site for parts, replacement LCDs, service and DIY info.. ... PC Laptops

Princeton VL1716 monitor displays "out of range" and the background is black when connected to compaq CPU and pugged on.

The set resolution is incompatible with the monitor. Use a monitor that works, change resolution then retry ... Princeton Digital VL17151 17" Flat Panel LCD Monitor

Need help for my Dell Inspiron 9400 Laptop

Try booting in Safe mode, see if you get videoIf you do, reboot in VGA mode, then adjust the refresh rate accordinglyA replacement LCD is about $200 on EBay ... PC Laptops

What is the MHz setting for a Princeton Digital VL1716 monitor? I hooked it up to my computer and the screen says "out of range".

The highest is 75MHZ and the lowest is 56MHz, ita dipends on what sulution you chose to use, 1024 X 768 is 75MHz, 800 X 600 is 56MHz\015\012\015\012To make it easy...here is the manual:)\015\012 ... Princeton Digital VL1716 17" LCD Monitor

I was adjusting picture on monitor and now picture completely messed up

\015\012Signal out of\015\012\011\011 Range.\015\012Out Of Scan Range\015\012Horizontal frequency is out of range.\015\012Cannot Display This Video M ... IBM E74 17" CRT Monitor

Monitor out of range when a game is booted up

The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Over rang i have 15" proview crt when i start pc then display msg over rang for 9 sec. after this screen will be black.it can't open my bios screen.

On crt monitor adjust screen referesh mde to 75Hzor go to windows safe mod e\015\012You can see your monitor ranges ; \015\012right click desktop -> properties -> settings -> monitor \015\012You'll see Scr ... Proview PT 15.1" LCD Monitor

Problem with compaq MV 520 monitor

Your monitor is operating normally. After Windows starts it is setting the video resolution to something outside of the monitor's range. That's why you see the Windows splash screen, then the message from the monitor about the settings. Most likely t ... Compaq MV 520 Monitor

Monitor displaying out of range message - Hansol Computer Monitors

Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

Relisys Monitor model TL528A - Plug it in, screen is blank panel light is yellow. push ON button and I get a 5 second message stating: OUT OF RANGE HS: 53.5 KHz VS: 84.8 HZ WORK RANGE HS 31.5-60 KHz VS: 56-75 Hz Then the screen goes blank and the panel light returns to yellow. What does this mean and can I repair it? I am pretty handy with electronic and mechanical repairs.

It normally means that you have connected the monitor to a computer whose resolution and frequency are beyond the range that this monitor are capable of.\015\012\015\012To fix this, you can do one of two things: reconnect the old monitor ... PC Desktops

Inout signal out of range Answer Failed: retry

It shows out of range because the PC is sending out the video signal that is higher than the monitor can display, you need to set the PC video resolution to the native resolution: 1024 x 768 @60Hz. You can reboot the PC into save mode (hitting F8 key ... IBM ThinkVision L151 15" LCD Monitor


Hi,\015\012It is just that at the initial stage your screen resolution was a tad too high for the capacity of the monitor. As long as you retain the working resolution you should have no problem. To lower or increase, right click on any clear area o ... Soyo DYLM1798 Monitor

An Out of range box

Frankr2327\015\012\015\012If you are getting this message this means that you are connecting a device to the monitor and/or a connection that is putting out a signal that is not supported but the monitor. You may also need to look at the ... Envision Computer Monitors


Restart your computer in Safe Mode\015\012(or reconnect your previous monitor).\015\012\015\012Set the screen-resolution to 800 by 600 at 60 Hertz.\015\012Shutdown, connect the new monitor, and restart, and your Soyo monitor w ... Soyo DYLM24D6 LCD Monitor

Input Signal Out Of Range

Some monitors have low resolution, that if it doesn't support that resolution then you'll expect an "input signal out of range" message on screen. try to boot on "safe mode" if it works then you have to lower your screen resolution at "display proper ... HP Pavilion F1523 15" LCD Monitor

Signal out of range

1: Signal out of range meas the monitor can't handle the input refresh rate. lcd and Tft monitors usually supports 60 and 75Hz refresh rates.2: The Resolution you are using to view the desktop is too high, this number is depending on the size o ... Kogi L7CH Monitor

Our viewsonic monitor tilts forward. how do we tilt it back?

Hello again.\015\012\015\012The ViewSonic VG1930wm has a height adjustment range of 3.2", TILT capabilities, and a swivel range of 360 degrees.\015\012\015\012So yes your monitor should be able to tilt back and forth.  Most likely if ... ViewSonic VG1930WM LCD Monitor

Soyo monitor: Out of Range

"Out Of Range" is more than just resolution. It means your video adapter is set to a resolution/refresh rate setting that is outside the range of supported signals.\012\012Go into your Video Adapter's settings, look at resolution then the re ... Soyo Computer Monitors

Input Signal Out of Range

I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor

StarLogic- Out of range

The computer needs its screen resolution reducing or changing in aspect ratio to suit the StarLogic monitor. Use a previously-working monitor and reduce the resolution on the computer to 1024 x 768 pixels or less (right-click an unused part of the d ... Star Logic 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5182 seconds