Having problems with your Packard Bell PC Desktops ?

Screen freezes after power save has been on. Windows vista> Mouse and keyboard do nothing. Also will not turn off with pc switch - nhave to turn off at power supply and restart.


Answers :

Try windows XP
Repair Help & Product Troubleshooting for Packard Bell PC Desktops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

EMachine T3406 wont boot


Is there a post beep when the pc is switched on. check the memory if it is a beep beep beep sound , also disconect the hard drive, dvd drive, floppy, and any usb devices and see if it boots up. if that fails it does seem like the mother board, also c ... E-Machines eMachines Desktop PC

A display problem in my Acer desktop pc


Techguru 2009: First thing disconnect all power. Remove all drives (hard drive, CD/DVD, Floppy). Then remove all PCI cards. Also slowly remove the Memory cards. You should only have the motherboard w/processor and the power supply connected, do not c ... AcerPower FV PC Desktop

Monitor not coming on - Packard Bell Easynote R4650


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... HP Pavilion a305w (DM181AR) PC Desktop

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

Main board won't power up


You may need to reset your processor and heatsink. Sometimes the thermal gel between the processor and the hearsink will evaporate over time and cause this problem. Try appling more thermal grease, reseat the processor.heatsink and try again, (When y ... PC Desktops

I get a 1-3-3-1 error code beep on Toshiba Satellite M35x-S109


Well it sounds to me like it is your actual install, I suggest you that you do a factory restore, \015\012Toshiba laptops from mid 2007 onwards dont have a recovery disc supplied with a purchase of a laptop. Instead, Toshiba has added a ... Toshiba Satellite M35X-S109 Notebook

Black screen While trying to download a new XP windows operating system on a Compaq Presario S4020WM,,,the pc froze,,,so it was restarted. Now there is nothing but a black screen. We tried another drive,another cd rom,new memory,another monitor,another power supply...the screen is still solid black,,,,there is no flashing cursor. Do I need to go into the bios and change something. If so,how and what. THANKS for any help.


My next step would be to see if there is a CPU fan and find out if it is spinning.  The problem sounds like a bad CPU, which is usually caused by a bad fan.  \015\012\015\012Are there any beeps when you try to start it?  If the a ... Compaq Presario S4020WM PC Desktop

Power not on


\015\012First if you have move the computer recently, check that nothing has moved inside box and unplug cards if any including memery and replace again.\015\012\015\012 ... Acer Veriton 7600GT PC Desktop

Cannot get new Motherboard to boot up in Normal Mode


What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

Power outage,monitor wont power up,hope its not fried


I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor

Gateway GT4022 has issues powering up and restarting


1.Yes the Power On switch is okay. (PS. If you hold down the Power On button for 10 seconds on any computer, it will turn off)2.The heatsink held down by springs on the Northbridge, and Southbridge chipsets, is an excellent idea. Wo ... Gateway GT4022 PC Desktop

No output on Monitor


You cleaned the computer case out with a can of compressed air for computers? You had the computer unplugged from the surge protector? You touched the metal frame of the open computer case, to relieve your body of static electricity?IF so ... AMD (90613) PC Desktop

Not turning on, has power and everything


Do any of the fans spin at all, as though it's attempting to boot up? If not, then double check your power supply to see if it has a switch on it and if it does then make sure it's switched into the ON position. If so, then I would recheck the power ... eMachines T3604 PC Desktop

My t2862 powerlight will not come on but a green led comes on on the main board, nothing else happens. I also disconnected the pwr sw,hdd led and pwr led plugs and don't know which pins they go on. Thanks


On the front panel header where the wires connect, there are two rows of 5 pins. The top row actually has 4 pins with the end one missing, and the bottom row has 5 pins. The first two pins on the top row are for the power LED. The next two pins are f ... E-Machines T2862 PC Desktop

Monitor Display Problem.


The first Polyview has a power supply problem (a short) and locks out the power until it is unplugged. You need to check the voltages inside the Monitor to determine which component/s are faulty. I hope you know electronics if not leave it to the r ... Polyview V17E 17" LCD Flat Panel Monitor

EMachine will not turn on.


Sounds like the power supply is faulty. Power supplies are very dangerous to try and repair, even for qualified technicians. I would also suggest not trying to plug it in or turn it on until the new power supply is in place. Faulty power supplies ... E-Machines eMachines Desktop PC

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Toshiba M305D S4830 laptop wont start


"I have M305D S4830 laptop. I put it to sleep in the night. In the \012morning when i tried to turn it on, it wouldnt start. The light on the \012switch turns on and it charges the battery fine, but no HDD activity(but\012 it does spin up and stay ... Toshiba Satellite Laptop with AMD Turion X2 Ultra Dual-Core Mobile Processor ZM-80 - Fusion PC Notebook

SPoradic faults when booting


This problem isn't easy to diagnose, but there are some things you can try to narrow down the problem. Do this at your own risk, but go into the bios settings and check your processor temperature. Take note that if there's a a feature to enable pro ... PC Desktops

My tower has power but won't come on


First guess is the motherboard is bad a few things you can try:unhook the monitor from the computer and test it on another computer. If the monitor works then its most likely the motherboard. leave the computer un ... Compaq PC Desktops

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

The power button no longer works. IS the


I think your power supply has blown, take it to a computer store and ask them to replace the power supply then your problems should be over but you could just ask them to transfer computer box and that should also fix your problem because most boxes ... eMachines T3406 PC Desktop

My computer does not start up


Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops

My emachines T3828 will not power up. I changed the power supply, but that didn't help. my next suspect was the power switch. I found that the wires wer a little loose. Thinking that the power switch wires were one unit, I pulled them. Imagine my surprise when I saw that they wer actuall three seperate wires, One black and white, One blue and wdhite, and one red and white. I need to know how to reconnect them, and in which order. I also noticed that a green light comes on. I assume this is for t


Hello there,The green light on the motherboard is there to indicate that you are in fact getting power to the board, which is good. The wires you refer to are in fact the power switch, reset switch, and probably some type of ... E-Machines T2742 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0644 seconds