Having problems with your Norcent Technologies lm550 (Black, Silver) 15 in. Flat Panel LCD Monitor ?

No power cord for monitor

\015 I bought this monitor second hand. It has the cord to connect to the computer, but does not have the power cord to connect to electrical outlet. Where can I find or buy a replacement power cord ?\015

Answers :

Any local repair shop can give you one or sell you one for like 2 bucks. If you pay more then 5 bucks your getting ripped off. Also if you ever had an old computer setup before and have wires laying around one of those power wires should work just fine. Its a universal.
Repair Help & Product Troubleshooting for Norcent Technologies lm550 (Black, Silver) 15 in. Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dell e137fp monitor flashing green...

Below you will find my recommendations for troubleshooting this issue:1. Reseat the power cord and verify a good power source. To reseat the power cord, follow the steps below: 1.1 Power down the system. 1.2 ... Dell E173FP 17" LCD Flat Panel Monitor

19' Westinghouse Monitor - Intermitent come on.

The problem is either with the power cord itself (especially if it is connected to the monitor such that it stays bent all the time), or the problem might be with the socket into which the power cord plugs in the monitor. The solder joints fixing the ... Westinghouse 19" Widescreen Flat Panel LCD Monitor

Nothing on the screen after power on

Turn on the computer and complete the following steps:\015\012Step 1: Check cable connections\015\012(If you can see the initial HP or Compaq logo screen but later lose the picture, you can skip to Step 2.)\015\012check the video cable connection on ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

I tried turning on my monitor and it wouldn't turn on. I checked the power cord and everything was connected correctly. Any Idea;s?

The first step is to make sure the plug you have the power cord plugged into is supplying power to the monitor. [surge protector? Check the switch or the reset button]. Check for the powered on light, usually in the power on button on many compute ... Mag Innovision InnoVision LT765 17" Flat Panel LCD Monitor

'input not supported'

All I can say is WOW! I have been using my pc with my monitor for months and I was installing a new printer and must have wiggled something loose, and all I was getting out of my monitor was "INPUT NOT SUPPORTED." So I came to this forum, and low a ... Acer AL1916W 19" LCD Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Dell Monitor shuts down with "entering power save mode" command

There are times when you need to install software for a monitor to work with a PC. If you have the software disk that came with the monitor, you can try to install. You can also try changing the power cord to the monitor. Generally, power cords ... HP Pavilion a810n (PP164AA) PC Desktop

Monitor stop responding. No blue light indicating power on. Monitor totally dead

Ok. This could be due to a number of issues. One, it could be the plugin you have the monitor plugged into. try to plug it into a different wall socket.Two, it could be the power cord of the monitor itself, Depending on ... Computer Monitors

Replacement AC/DC cord to power up my 1730B comp monitor

You cannot use a VGA cord to power a monitor. That is the cord that connects the monitor to the computer and is not the power cord. Almost all monitors use the exact same 3 prong power cord. Any computer shop will have a used one on hand. ... Solarism LM-1730 (Black) 17 in. Flat Panel LCD Monitor

Power cord issue? Black Screen with image issue?

The powere cord you are using is fine (the cord is made to handle the 10A load, you are only drawing 1.5A). The monitor uses switching mode power supply that can handle any voltage INPUT between 100v up to 240v. More likely to be bad caps in the pow ... Westinghouse LCM-19v5 Monitor

Xerox XG-91D 19 in. Flat Panel LCD Monitor

Hey rg213 I had a similar problem with my screen over the past week. This is "solution" is annoying but has been 100% effective every time I wish to use the monitor. After your computer has started to boot and the Xerox logo flashes conti ... Xerox XG-91D 19" LCD Monitor

I need power cords for my monitor

The monitor needs a power cord and a signal cable. The power cord is a standard 3-prong detachable cord just like the one on nearly every desktop computer and many other electronic appliances.The signal cable may be one of two types, depe ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Monitor How many hook ups does this monitor have? It went off and I can't figure out what's wrong with it. I see the large thick cord that connects on the back to the computer but I don't see a power cord. Does it have a power cord? Sorry I didn't hook it up.

Monitors need power cords to function, & there is nowhere near enough power in the data cable to power the monitor. So, it sounds like the power cable got pulled out somehow and is now lying on the floor. The power cable will be a small plug ... Microtek C783GM 17" Flat Panel LCD Monitor

My AL1703 sm monitor will not power on.

That means the power cord is faulty, the monitor does no send message to the power cord rather the power cord sends message to the monitor so its the power cord that's bad expecially if its an adaptor, thanks ... Acer Value AL1703SM 17" LCD Monitor

Dead Monitor Hi, I bought my parents an HP computer for Christmas and now, only 7 months later, the monitor stopped working. w1907 monitor. I've read some comments on here but don't understand what the solutions are saying. I don't know anything about inverters etc. Can a monitor be fixed or replaced since it's only 7 months old? I think that's an extremely short lifespan for a monitor, especially since it's used only a few times a week for short times. Thank you the monitor is dead

Hello, welcome to Fixya!Your monitor is having a power fault \012because it is not switching on. The monitor might have worked fine in \012the past, but that's electronics for you. Power surge, irregular power \012supply, excess power supply, ... Compaq V700 17" CRT Monitor

My computer does not start up

Hi im josh in cebu phils.may i help you? Friend try to use these solutions i got this in my book.\015\012Dealing with System Startup Problems\015\012There's nothing scarier than turning on your computer and finding it doesn't start. What you d ... PC Desktops


Chances are that you are not hurting anything with the lower power supply. What is probably happening is most likely two fold.\015\0121. The light bulbs in the backlight circuit may just be wearing out and need replacement, and\015\0122. the lower cu ... Proview PL 566s 15" Flat Panel LCD Monitor

Supplying power to the monitor to get it to work

The correct Power supply can be purchased on ebay. It is not a "D shell Connector. The correct power supply is 12v 4.16 A DC. ... HP Pavilion F50 17" Flat Panel LCD Monitor

Push the on button and nothing happens

I believe you are using a new power supply now.\015\012Before you start, first check if your Power button is OK.To do this, first unplug the power cord from your PC.Remove POWER-Button connector (with black/white or blu ... HP Computer Processors

LG Flatron L1710S Monitor stuck in Power Save Mode

Try wiggling the Cord on the backside of the monitor.. Not the Power Plug Cord, The Other Cord that attaches to the PC. Do this once the monitor turns off , grab ahold of the cord about 2 inches from the back of the monitor, then bend the cord to the ... LG Flatron L1710S 17" LCD Monitor

My ViewSonic VX900 won't turn on. I have had it since late 2003 and it has operated flawlessly. Went to turn it on; nothing. No light, no standby light. Checked the power cord against another monitor and the power cord is OK. Used a different power cord; still nothing. I assume the something is dead inside. If this is a known issue and there is a part # I can order from somewhere to solder it myself, I am certainly willing, unless it is not $ justified vs. spending $200 for a new monitor. Thank

Hello,The VX900 has 2 different version of the unit. One version has an external power supply and the other has internal power supply. Since you said you changed the power cord I would guess you have the internal power supply version. The ... ViewSonic VX900 19" LCD Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

HP desktop monitor problem

Hi try this ,,,\015\012\015\012\015\012Ensure the video cable is connected (and connected to the correct video port).\015\012\015\012Turn off the monitor using the monitor's power button and then restart th ... HP Pavilion a305w (DM181AR) PC Desktop

I have a Westinghouse LCM-22W2 LCD monitor. I believe my power board is bad. I want to either replace the power board or bad capcitors, if I can find them. I do not know how to take off the back cover, however. It almost looks as if a special key is needed in the lower left corner of the back cover. Does anyone know how to remove the back cover? Ed

Have you gone through the user's guide? There are some sleep settings and automatic adjustments that this monitor makes, and other changes that users have inadvertently triggered that seem to be causing quite a bit of confusion these days. Make sur ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

Won't power on. No lights at all.

You have done Most of it...\015\012You have tried to swap the Power cords that work fine with the Other Monitors and If that do not work there are 2 things externally that could be bad.\015\012\015\0121-> The Power Button.\ ... ViewSonic VX924 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4876 seconds