Having problems with your Neovo F-417 17" LCD Monitor ?

My VGA plug is missing on my monitor

\015 During a brake in at my office the VGA plug was cut of with a knife. They stole my computer but left me the monitor. Would like to use it again and want to solder the plug back but i cant find the desired cable information to do so. Maybe sombody can help me to get the desired infomation. Thank you\015

Answers :

If the cable does not disconnect from the monitor, then go ahead and buy a new connector\015\012http://www.startech.com/item/C15HPSM-High-Density-DB15-Male-VGA-Solder-Connector.aspx\015\012
\015\012I recomend this over buying a generic VGA cable and splicing wires, for better connectivity and less 'noise'.
Repair Help & Product Troubleshooting for Neovo F-417 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Compaq Presario laptop with a broken


Hi:\015\012Just plugging in the monitor to your VGA port on the laptop won't make it display. You have to toggle to the exteral display, or both. Usually you have to hold down your function key, and then hit the external display key. It could ... HP Compaq Presario F761US Notebook

My VGA plug is missing on my monitor


If the cable does not disconnect from the monitor, then go ahead and buy a new connector\015\012http://www.startech.com/it ... Neovo F-417 17" LCD Monitor

Hp pavilion f1930 shows pic for 2 secs. then blank


Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

I have just installed a Acer LCD #X223W moniter. What do I need to do to get my speakers to work with it? Is there a missing port or do I need a new cable. This moniter has a HDVi cable but the Computer doesn't have a port for it? What or which way do I need to go? Thank You for any help you may have!!! RG


Did you give the correct model of the Acer monitor you have? When I looked up the X223W monitor, I see a monitor with a DVI-D port and VGA port. Only the VGA cable is usually included in the box. If your computer has a VGA port (most olde ... Compaq Presario 5000 PC Desktop

Monitor was in power safe mode, had older monitor and plugged it in and it said nothing wrong with your computer, check monitor cable. card and plug loose no back of tower and also loose on inside of tower. what do we need to replace?


Not completely sure but Ill give it a shot \015\012might be something is going wrong with your monitor \015\012or your monitor ID was not established try these 3 things \015\012 1. right click display after attaching trouble some ... Gateway 700 X PC Desktop

Toshiba Satellite P200-156; Screen dead; external monitor 'funny'


Thanks for the awesome explaination\015\012\015\012The answer is that there are several causes of a dim display or the failure of a backlight to illuminate the screen. As most people are aware, inverter and backlight failure are the most ... PC Laptops

My monitor gets no input signal, computer does


Try the montor on the external vga connection of the laptop. You can swap the signal from the laptop screen to the external monitor using the swap key (usually a FN key). You can do this whilst the laptop is up and running. If you see the display the ... Xerox XA7-17i 17" LCD Monitor

We have Dell OptiplexGX745 smallform factor desktop computers that we need to run two monitors.


If your Dell Optiplex GX745 came with the ATI Radeon X1300 graphics card, that has One - DVI graphics port, and One - VGA graphics port, it's no problem.This link shows an ATI Radeon X1300, and the two above mentioned graphics ports, ... Intel computers9: P3 Computer Computer (Reconditioned) (CSINTELP3) PC Desktop

My Dell M991 TCO-99 monitor has lost the red colour i.e. there is NO red at all, an of course all the other colours are affected - shifted towards blue - is it the end of the CRT or can it be fixed by adjusting or replacing some component ?


I'm assuming the red is gone completely; that is, it's not present at all and not just missing in video from the computer. If that's the case, you probably have a bent pin in the VGA connector, a bad signal cable, or possible video card failure. ... Dell M991 19" CRT Monitor

Cant connect pc to tv monitor


You didnt say whaat your graphics card was but if you are using the ONBOARD you might have a couple of problems.\015\012\015\012It might also be useful to know what type of connection you are making. ... E-Machines eMachines T3830 PC Desktop

Black screen on my desktop, and connect pins are broken & bent


You'll get either no signal or missing color(s) if pins are bent or missing.Carefully bend pins back with small needle-nose pliers. Pin 9 is missing by default - if any other pins are missing or broken, you'll need an expert to wire a ne ... E-Machines eMachines Desktop PC

How to add second monitor to asus cg5270? - ASUS Eee PC 1000H Laptop


The Asus Essentio CG5270 is a desktop computer, so I see it was placed in the wrong category. No prob!Certain selected models of the Essentio CG5270 come with a graphics card. If you have this graphics card, you can use two monitors at th ... ASUS Eee PC 1000H Laptop

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Gateway GT5058 Geforce 6100 lost red


Yes.. Check to make sure your wires are in good working order, check for loose pins, and make sure there aren't any kinks / tears / breaks in the shielding for the monitor cable. Also, make sure you have the latest drivers for your graphi ... Gateway GT5058 Desktop PC

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Missing plug for monitor


Well,It doesn't have a s-vid connector, that's the plug for the powersupply. ... Hyundai ImageQuest L50A 15.1" Flat Panel LCD Monitor

Cannot read the model number (chinese) I known i have a flat screen monitor 20 inches from DELL 2004 I want to connect it to my Inspiron 1100 .I need instructions this an handme down so I have no manual.The monitor does not connect automaticly.I have a blue end plug on the inspiron with 15 pins the cable connect to the monitor with another 15 pins=15 pins at both ends. The monitor connect to a power pack connected to an outlet. (is there something missing ?) The monitor display 1:D-SUB & 2:DVI-D


Since the cable you're describing is a VGA cable with the 3-row, 15-pin configuration, it will be the 1:D-sub selection. The DVI choice is for HD TV or a display card with HD capability. The S-Video is more commonly used for higher clarity video sign ... Dell Computer Monitors

Where do we find the display lid switch for a HP Pavilion dv9715nr ? we replaced a damaged hinge on this laptop first and now we cannot get a display.


Let me guess. Damaged Left hinge? HP had a recall for this problem, but the recall has lapsed as of May 31, 2009. ... PC Desktops

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Starlogic MJ7BBA with power and VGA cable not plugged in the monitor first show RGB in the upper left corner then a white box with red border stating that it is disconnected. I have tried four computers now two laptops and two desk tops. all four with the same results. using linux ubuntu 8.04, 8.10, and windows XP. every time when the monitor gets a signal the power light starts to flash at a one sec on/off and the display goes blank. I don't get any responce from the three menu buttons ever


This unit has had a failure in control circuit.The unit should be sent or taken in to a service center for a complete testing and servicing. The customer support website is www.fourstari.com They should be able to tell you, what the problem is and ho ... Star Logic 17" LCD Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Princeton VL1715 startup problem


Have you disabled your onboard video in the BIOS? Boot your machine with the vga cord to the motherboard. You need to get into the BIOS. Depending on the make of your machine you need you will need to hit the del key, f2, or even f1. Go to the per ... Princeton Digital VL17151 17" Flat Panel LCD Monitor

Color I had unplugged my computer and monitor and when I plugged them back in the colors on my screen are not right anymore I have tried to ajust them but can seem to get even close to where it should be, what would make the color go bad.


The most likely problem is that a pin on th cable is either bent and missing a color or the cable can be bad. If you use VGA a pin can bend and cause a color disappear. DVI cables can sometimes be the same issue.Most likely if the cable i ... Envision EN-7100e 17" Flat Panel LCD Monitor

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

ACER AL1914 LCD Monitor goes black but green light stays on


The monitor is doing a self test a finding an error.\015\012The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inv ... Acer AL1914 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4920 seconds