Having problems with your NEC MultiSync LCD1765 17" Flat Panel LCD Monitor ?

I need a monitor cable pinout, what color wire goes to which pin, my dog chewed the connector off, i have got a new one to solder on just need the pinout to finish, thanks


Answers :

Repair Help & Product Troubleshooting for NEC MultiSync LCD1765 17" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need a monitor cable pinout, what color wire goes to which pin, my dog chewed the connector off, i have got a new one to solder on just need the pinout to finish, thanks


Http://www.real-knowledge.com/videopin.htm ... NEC MultiSync LCD1765 17" Flat Panel LCD Monitor

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory


I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below


Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

I have a virus on my computer Toshiba Satellite


You're going to need a few bits before you start:\0121) Drivers:  Start here:http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp...and download a complete set of drivers for the operating system yo ... Toshiba Satellite Pro A200-EZ2204X Notebook

When booting up, when windows is finished I cannot work mouse


Dear sir \015\012\015\012As it happens I still need some clarification what you were doing just before this incident happened but i will provide you a solution which might help you \015\012\015\012\015\012ASSUMPTIO ... Toshiba Satellite A105 Notebook

Acer Aspire 5920 alt f10 to use my recovery dsk mismatch d2d32


This a very common error. I too have suffered from this but after about 15 hours of fighting with it.. I fix it. I could not use the ALT + F10 keys as I would get the D2D32 Type Mismatch Error. So lucky me when I got my laptop from acer I made the re ... Acer Aspire 5610-4648 Notebook

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

Dc jack How do I replace the dc jack input on the Sony PCGK37


The PCG-K37 (Sony VAIO Laptop) uses a DC Jack soldered to a two-wire jacketed (shielding) cable that is routed under the DVD (tray) and towards the back to the Voltage Board located under the Touch Pad (Mouse) via a white polarized plug. The wires ar ... Sony PCGK37 Notebook

Missing NTLDR file


The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

Monitor stays on for a few seconds then goes out


This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

ViewSonic VG500 wiring configuration?


It is pretty difficult to solder on a new DB-15 connector, the easiest way to do it would be to take apart the back of the monitor and de-solder it off the video controller in there. Each contact will be labeled and a replacement DB-15 cable with co ... ViewSonic VG500b (Black) 15" LCD Monitor

DEAD DELL I got a dell and the switch where your power suppy plugs in was loose I could smell it burning one day and it melted . Now got a new stwitch and added it to mother board and after trying to charge battery over nite still nothing.. Any ideas for next problem?? It didn't appear that anything on mother board was damaged. Could I need new battery ?


Replace the DC Jack, the battery will may charge if it doesn't get power from Positive and Negative. On that particular model it is usually the positve terminal. Insufficicent solder at production time causes a weak joint, repeated plugging in weak ... Dell Inspiron 2200 Notebook

No digital SoundTouch control center Logitech Z-5500


The very same problem I ran into when I received my new ones today...But from the get-go, I figured that I could either use the speakers in conjunction with the new set to create more sound...or use the speakers with other systems. ... Logitech Z-5500 Computer Speakers

Wont boot up


Dear bebjirmav\015\012\015\012usually a machine that refuses/ gets gobby on boot up has either a config error or hardware fault. Now the first thing i tend to do is whip out that hard drive (carefully though as the thing is fairly fragile ... HP Pavilion dv6000z Notebook

Short in subwoofer wire - Altec Lansing computer speakers & sub


Yes, you can splice the cables and put on a new connector, goto radio shack with the old connector and im sure they will have one you can splice right onto it. ive done this many times with varios equipment "headphones speakers etc" it may take a cou ... Altec Lansing ADA 885 Computer Speakers

I have a eMachine with XP and tried to use restore disks. The first disk started working then got an error message about output to A:/Ghosterr. I called the tech support # and was told it was out of warranty, that my disks were damaged and I couldn't buy new ones. Said I had to find local technician to work on it. Does this sound correct? Reading here it sounds like I can try that F8 trick above to restore?


I am not sure what you mean by the F8 Trick. If you mean hitting F8 (or F5) at boot up time, that will get you to a boot menu where you can choose to boot into safe mode with network, without network, and a few other options, then yes, that is the t ... E-Machines eMachines Desktop PC

White screen When ever I turn on my pc my screen stays white. I turn off pc turn on again still no monitor only white screen. Does this 5 or 6 times before it comes on the right way


I had problem with a Proview 19? monitor:\015\012Product number: #PL926Wbi\015\012Model Number: 900W\015\012The monitor was manufactured in January of 2006.\015\012\015\012After I had owned and been using the monitor for 1 year and two weeks, it star ... Proview PL926WBi 19" LCD Monitor

Top Gun Afterburner FFB Joystick flop around and grinds with forward stick


Hi, this is a very common problem with people who use those types when they get used alot the ball it sits on wheres and then it dont sit properly causing the problem you are having.The problem is as the parts a plastic they never last th ... Guillemot Top Gun Flight Control System (001-0004-FCS) Joystick

How do I start my computer but not any of the


Oh! I see what you're saying. I don't think I caught the part where you said you were installing new software.Zonker7 is absolutely correct. When installing new programs, often times, even if you have no other programs open (like Word 200 ... PC Laptops

This sounds very funny but the problem is I cannot get my desktop


The problem is due to explorer being corrupted or not loaded for some reason.\015\012To solve press ctrl alt delete and bring up task manager and then goto file menu then new task and then type explorer and hit ok. If this loads your desktop up ... Acer Aspire 5610-4648 Notebook

Monitor turns black after 3 seconds


Teo6925, "Switch-mode-power-supply" is in partial shutdown mode. Can you see any electrolytic filter capacitors that have a slight "swelling" to their tops? They should be flat!! You may also need to inspect all the soldered component connections ver ... BenQ Computer Monitors

HP laptop display issue


If you are recving 1 long and two short beeps, it is not a memory problem.\015\012It is not a Lid closing or lid switch problem.\015\012If you are able to switch to and from your LCD and Monitor, you are lucky. ... HP Pavilion dv6000z Notebook

Cd/ dvd does not load or work show on computor


For the most part, what's occurring is one of two things. Either...\015\012A) an application (such as Roxio, Nero, iTunes, etc.) is installing a driver file (as a .SYS) or replacing a working driver file that is refere ... Intel Compaq EVO D500 (RBMDTCPQP42400) PC Desktop

No power,not charging


Hi,It is most likely that there was nothing wrong with the original adapter/charger. What I suspect is there could very well be a loose connection more aptly a cold solder among the pins of the power jack that is soldered to the motherboa ... Acer Aspire 3680 Laptop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9159 seconds