Having problems with your NEC MultiSync FE700 17" CRT Monitor ?

Operating at a slower than recommended refresh rate

\015 My nec multisync fe700 is operating at a slower refresh rate than normal. how do i fix this problem?\015

Answers :

The refresh rate can be configured in Windows in the display properties. It does require that your monitor has been identified or configured, otherwise it can limit the refresh rate.
You can overrule the setting to not limit the refresh rate to compatible devices only, but be careful to not configure it too high as it can break your monitor!
Repair Help & Product Troubleshooting for NEC MultiSync FE700 17" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Operating at a slower than recommended refresh rate

The refresh rate can be configured in Windows in the display properties. It does require that your monitor has been identified or configured, otherwise it can limit the refresh rate.You can overrule the setting to not limit the refresh rate to ... NEC MultiSync FE700 17" CRT Monitor

My 2gb ram stick died, so I tried upgrade to 4gb

Most appreciated naturalgal66. Perhaps you would like more information, to put together some of the information I stated in the Clarifications.This is a motherboard block diagram,http://en.wikipedia.org/wiki/File:Motherb ... HP Pavilion a6600f Desktop PC

Acer Aspire E360, Need new Motherboard, cpu and powersupply

If you're going to replace the Mobo, Processor, and PSU, you may as well as replace the computer case, also. Another $50 USD will buy you a decent computer case. (Seen this? http://www.directron.com/cs888uvbl.html ) ... Acer Aspire E360 PC Desktop

I need a manual or product number for power supply power supply order #

The Power Supply used in a Compaq Presario is a 250 Watt model.The shape of the power supply, is one that is used in over 90 percent of personal computers.ATX (ATX12V)Should you put - Compaq Presario SR1120NX power suppl ... Compaq Presario SR1120NX 2.66GHZ Tower w/ CD-RW (2018267632) PC Desktop

After starting a program the display showes "out of range"

Hi,\015\012\015\012Looks as if the "Refresh Rate" or the "Resolution" is set to a higher setting then recommended.\015\012\015\012\015\012To check this setting, right-click on the desktop (empty area on the desktop), s ... LG Computer Monitors

Monitor 2492hm - error message: "Not Optimum Mode, Recommended Mode: 1920 X 1080 @ 60 hertz". Support from Samsung very poor - their answer is '...change to optimum frequency'. How and where do I do this - monitor setup, control panel on PC, video card frequency? Any help greatly appreciated.

To term in the computer is the refresh rate of the monitor. Depending on the operating system it is done a couple different ways.\015\012\015\012Right mouse click on the desktop and choose properties or personalize (depending on your OS). ... Samsung Computer Monitors

Cant use my usb

\015\012Refresh and reinstall USB Ports Of Your Computer \015\012Hello there, the ... Toshiba Satellite M35X-S311 Notebook

The serial # is not found on the tower case

I'm not sure where you got this tower, but if the serial number isn't on the tower chances are it's been tampered with or stolen by the person you got it from. (This is just a guess)Call customer service and keep pounding zero until you g ... Acer PC Desktops

I am trying to burn a DVD that is 1 hour and 49 minutes long and it will not burn correctly. On a DVD-RW it only recorded just a small amount at the beginning and also had music in the background. I tried a DVD-R and it would not work at all. It also seems that the video file is larger than what the DVD can hold but I am using 4.7GB (2hours).

Make sure you treat your blank CD-R's with respect.\015\012Scratches or dust may cause write errors! Handle the disc carefully when transferring it to the CD drive!\015\012 \015\012 \015\012\015\012 \015\012DMA & Auto Insert ... PC Desktops

Ram upgrades I am upgrading 2 e-machines computers with Ram. My question is what order to fill the slots with memory. The first machine is a T4200 which has 3 slots in it and holds a 1.5 gb max. I am adding 2 sticks of 512 mb each to the factory installed 256 mb. Assuming the current stick is in slot 1, do I now put in a 512 each in slots 1 & 2, then place the 256 in slot 3? The second machine is a T3624 with 2 slots and a 2 gb max. I am replacing the current 256mb stick with one each at 1gb & 5

>>>>>Hello there,----Although these are all types of double data rate (DDR) memory, the varying numbers refer to the different speeds of memory your computer was designed for. Crucial no longer carri ... E-Machines eMachines Desktop PC

I just bought a belkin wireless router. it is a wireless G MIMO Router. i have set it up, but the number i have to type in on the address bar, it comes up 'nothing to display' i have no idea what else i can type in so i can get my router working? please help asap

Gunja\015\012Rank: WizRating: 85%, 88 votes\015\012 \015\012hi,Open the router page >> type this in t ... PC Desktops

Can I put different types of RAM on a motherboard?

Not different types per se, but you may be able to put different speeds.\015\012 Type would be like DDR Sdram ... PC Desktops

Monitor flickering and adjustment buttons locked

If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down ... This may also cause a flickering affect.\015\012Distorted or skewed image on monitor.\015\012Issue:\015\012D ... Samsung SyncMaster 940N Flat panel Monitor

Can you help me my computer says input signal out of range

This has to do with the refresh rate (hertz) of the monitor and whether the graphics card is capable of operating at that rate. So your graphics card is operating at a rate that is too high or too low for you monitor to receive. I've run into this wh ... PC Desktops

Computer Keeps Shutting Down on its own - PC Desktops

This issue could be caused by any of the below possibilities. \015\012Heat related issue. Hardware issue or error. Computer virus. Issue with operating system. Other failing hardware \015\012\015\012Heat r ... PC Desktops

IBM 21" frequent tick sound!

Too much refresh rate! set it to 60 hz only! you're over-stressing major components on your monitor! ... IBM P 202 21" CRT Monitor

Monitor flickers when you click a hyperlink - Kogi l7eh-ta ko 17" Flat Panel LCD Monitor

It sound like the video refresh rate is to low. To change the video refresh rate consult your monitors user guide and if you are running WIN XP operating system you can try the following:\015\012\015\012How to Change the Screen Refresh R ... Kogi l7eh-ta ko 17" Flat Panel LCD Monitor


Issue:\015\012NTOSKRNL.EXE is missing or corrupt.\015\012Related errors:\015\012\015\012Below is a listing of the full error message that may be related to this error.\015\012Windows NT could not start because the below file ... Acer PC Desktops

My LCD monitor is blinking very frequent.

When the refresh rate changes then the screen will flicker. Change your refresh rate to above 75. Here is how: Click on Start>Control Panel>Display>Settings>Advanced>Monitor>and you will see screen refresh rate. Change to high ... Acer Aspire 4315 Notebook

Out of range

Setting the Refresh Rate in Enable VGA Mode - Windows XP \015\012You will need to go into Enable VGA Mode to change the refresh rate. \015\012\015\012Restart the computer and repeatedly tap the F8 key on your k ... Computer Monitors

Heat from monitor - Computer Monitors

The monitor,screen,adapter or display of a\015\012computer is the primary user interface. Monitor problems are some of the\015\012most common computer problems since the voltages inside a monitor can be as\015\012high as 10 KV. Many of the problems ... Computer Monitors

I have a 913t monitor and about 3 months ago it started to go to a black screen with an error message "not optimum mode recommend 1280 x 1024 60 hz" any help???

Click START-SETTINGS- CONTROLL PANEL - DISPLAY - select the SETTINGS tab at the top - click onthe ADVANCED button (bottom right)- select the monitor tab- in the screen refresh rate dropdown box select 60htz- click on apply & ok - back at the disp ... PC Desktops

My screen has "out of range" written across the screen.

Find a blank space on your desktop left, it will bring up a box saying display properties. Go to the properties section and right click on it. Go to the setting section and set the picture resolution to the setting recommended for your monitor in yo ... Envision 19" Widescreen Flat Panel TFT LCD Monitor

Monitor not working

You will need to change the display settings for the type of lcd monitor you have, it is a wide screen I am assuming, you can change this by right clicking on the desktop select properties then settings the screen resolution should be on the middle l ... Computer Monitors

Lines in dos image, weird letters in place of

First of all, what operating system are you seeing all of this on ? The lines sound like issues that you can have, if the refresh rate is too low, not enough scan lines 'filling in the blanks'. Increase your refresh rate to at least 60 Hz, more if yo ... Acer Aspire 9800 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4056 seconds