Having problems with your NEC 1740CX-BK (black) LCD Monitor ?

Osd will not go away

\015 After powering up my NEC 1740cx monitor, the on screen display should stay on for about 2 seconds and disappear, but it is staying on indefinitely. i must push the select button to make it go away. what could be causing this?\015

Answers :

Make sure you completely exit out out of your display properties..
Repair Help & Product Troubleshooting for NEC 1740CX-BK (black) LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Osd lockout can't stop osd lockout from popping up on screen


Hi,This message occurs when the Menu button on the front panel is pressed for more than 10 seconds. OSD lockout prevents the OSD menu from opening on the screen when a button is accidentally pressed.\015\012To rem ... HP w1907 LCD Monitor

OSD main menu pop-up will not go away


Please try to Turn the monitor off. Hold down the Menu button while the monitor is turned off, then press the Power button again to turn the monitor back on. This should unlock your OSD menu and remove that message from your screen. best regard ... HP Pavilion F1703 17" LCD Monitor

The osd main menu has appeared on my hp pavilion f1703 monitor


Control Panel->System->Hardware->Device Manager->Monitor. select and uninstall. Then let Windows detect the monitor and re-install the drivers for your monitor.\015\012Do the same for the disply adapter in the Ctrl Panel. ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Screen not working properly


Hey guys i have the 2second problem aswell but!, i was just about to throw mines away when i can stumbled across away how to get it working proper again and again and again!. ive seen lots of help pages like this where everyone is talkin about replac ... Proview PL913B 19" Flat Panel LCD Monitor

When I turn on my Gateway FPD1765 monitor, the OSD comes up in the upper left hand side of the screen during the boot process, during the startup, and doesn't go away until you ask it to. Then when you do, there is a small rectangle in the upper left that has the following info: GTW FPD1760 65 CPT CLAA170E A08 When you click on OSD menu on the side of the monitor, there is a new menu choice labeled "F" next to the words Main Menu. What is this, and how do I make it go away?


... Gateway FPD1765 17" Flat Panel LCD Monitor

Help with my 190S monitor


I have Philips 19C monitor. From today, every 5 secs an attention message \015\012"osd main controls locked and unlocked" \015\012The AUTO(OK) bottons for 10 sec not give nothink\015\012What i can to do with this?\015\012Grego ... Computer Monitors

The osd compare and contrast menu is up and wont go away


Press the menu button to close OSD to exit On Screen Display.\015\012\015\012Visit the below link for more information:\015\012\015\012 ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Problem on hp monitor


I have a Dell E171FPB monitor that had the \015\012same problem with the Main Menu coming up and I thought I would tell you \015\012what I did to fix the problem.\015\012\015\012\015\012\015\0121. I shut down the PC.\015\012\015\01 ... HP vs15 15"LCD Flat Panel Monitor

Osd will not go away


Make sure you completely exit out out of your display properties.. ... NEC 1740CX-BK (black) LCD Monitor

OSD Lockout keeps popping up on my HPw1907 monitor.


My HP w2408 monitor. I just fixed this issue about 5 mins ago after getting tierd of whacking the buttons with anything handy. There are 2 slots on the underside of the monitor, in between the black frame and silver outer frame. Stick a flat screw ... HP vp17 Monitor

OSD main controls locked and moving cursors by itself


I think the main board is flaky in that monitor. Hook up another known good monitor to that computer and see if it behaves in the same way.If it does behave in the same way then you know its either the video card or the motherboard if yo ... Philips Computer Monitors

A blue box appears with OSD main menu and brightness on it won't go away


Buy a new monitor.....that one is broken. ... PC Desktops

Hitachi CML154XW - OSD function menu


... Hitachi CML154XW (Beige) 15" LCD Monitor

OSD lock out


I HAD THE SAME PROBLEM BUT ALL THAT WAS WRONG WITH IT WAS THAT MY MENU BUTTON WAS STUCK, TRY MESSING WITH IT BY FLICKING IT OR JUST MOVING IT AND IT WILL PROBABLY GO AWAY ... HP f2105 21" LCD Monitor

The OSD screen is up and won't dissengage(after trying the 10 second hold down) , also the video display say's switch the cable leads , I don't understand. The menu,+,-, auto buttons won't work. What might be wrong?


Try powering off your monitor and disconnect the cable at both ends. switch the ends if that doesn't work try another cable.then turn the monitor back on see if the osd menu went away. ... HP RY117AA w2408 24" Widescreen LCD

I keep getting a small blue screen with symbals on it. I have to keep pressing menu on monitor and it only goes away for a few seconds


Your monitor OSD firmware is damaged...Hard to see a solution here!!SoryRegards ... HP f2105 21" LCD Monitor

Screens says aging and brightness is automaticly turned to 0


... Philips 170S4FB 17" LCD Monitor

I have an HP pavilionf1703 monitor. Two blue squares on


Hello,If the cursor is hidden use the keyboard: Press the TAB key and cycle the options. When you reach the one you want press ENTERHope it helps. ... HP Pavilion F1703 17" LCD Monitor

Osd lockout wont go away. i fix for a short time then it comes back. I am ready tp put my foot throuight this monitor!


Is there a way to set to Factory Default? I can with my NEC, and would think your HP should too. ... HP Pavilion F1523 15" LCD Monitor

Static on Screen


Is this an LCD type of monitor or CRT? either case, there's a problem with the horizontal IC. My best solution for this case is to have the unit serviced by an authorized personnel as meddling with the internal circuits of the monitor is dangerous.. ... HP Compaq WF1907 Monitor

Too sensitive buttons?


You're monitor problem is interesting.Did you install any software which might have come with the monitor? If there was such software, then is it possible that certain keystrokes might be launching this menu?If this is not the case, then it is ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

Hp pavilion f1503-two blue square boxes (osd menu/brightness )


... HP Pavilion F1503 15" LCD Flat Panel Monitor

Blue tint on computer display monitor


Try1. Unplugging the video cord from the back of the computer (and screen if it comes off) and plugging it back in. Sometimes it can become loose and cause a screen to have a abnormal color contrast2. Updating the drivers to your card ... ViewSonic Computer Monitors

ViewSonic VX922 monitor - black screen - green power light flashes


PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.0529 seconds