Having problems with your Mirus X2500 Notebook ?

When the computer come on it displayed no video input please check video signal


Answers :

This means you have no video signal from the computer.
So if the computer is really starting up, then you have a video card problem. Either that or you computer is not passing the self test and if it doesn't do that, there is another problem with one of the components that needs to be fixed.

You might try to start in safe mode just to be sure there isn't something else trying to start that is messing up the video.
Repair Help & Product Troubleshooting for Mirus X2500 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.


OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

When the computer come on it displayed no video input please check video signal


This means you have no video signal from the computer.So if the computer is really starting up, then you have a video card problem. Either that or you computer is not passing the self test and if it doesn't do that, there is another problem wi ... Mirus X2500 Notebook

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

When i turn on my computer all it tells me is sva no signal input please check video signal


No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Pc starts and runs but wont boot up monitor shows no signal


1) When you turn on the computer, watch and listen for: a) power supply fan, (power is on) b) chassis lights (power is on) c) ticking sound during memory test (the BIOS POST is running) d ... HP PC Desktops

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Signal has gone - ViewSonic VX2235WM Monitor


If the monitor comes on and displays a message like "no input signal" or something similar, it's working properly but there is nothing coming from the computer. People often think that the computer is working and the monitor is at fault, when in fact ... ViewSonic VX2235WM Monitor

S-video not working any more


Check device manager and ensure that there is more than one display adapter listed, and no devices with red X on them. Please right click on both video adapters, and left click uninstall - don't worry. Reboot, and windows will try to redetect hardwa ... HP Compaq nc8000 Notebook

When i turn monitor on it comes up with vga input no input signal


Hi nobumsteers,This is most often caused by your VGA cable becoming detached from either the back of your computer or it's connection to the back of the monitor. First, check by unplugging both connections and re-attaching them firmly bac ... PC Desktops

Computer screen reads - "There is no signal coming from your computer. Press any key on the keyboard or mouse to wake it or or press the Input button on your display to switch to another source." I have done this but it still wont work. Please help. Thanks


Clear your C-mos (this can be done by removing the battery on your pc\015\012s motherboard and waiting 30 seconds!) Odds are something chenged your video settings in the BIOS. \015\012\015\012However if this doesn't work----:( ... Dell OptiPlex GX620 PC Desktop

Monitor won't stay on. Error message comes up that says "no input signal", then monitor goes out.


Problem with the monitor, monitor cable, or video output. For monitor, if you have more than one input, make sure it's set to the correct one. Try a different cable. Try a different monitor. Check your video card settings--if you see the BIOS boo ... HP PC Desktops

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

LG 700E monitor's power LED blinking continueously, no display


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG 500LC Monitor

Help with laptop


Hello Milligan, Your problem is the inverter board in the display. Thats the reason why its working with an external display. The external display input is from the video card not from your display. You can get an inverter board for arou ... Toshiba Satellite A100-S8111TD Notebook

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Monitor does not so any display


Hi, Welcome to FixYa.As you tried all these, we can make a conclusion that problem is with your monitor itself.Commonly, monitors has a problem with a bad plug pin at video connector orsolder connections inside the hardware of ... LG Flatron L1951S 19" LCD Flat Panel Monitor

I have just installed a crucial x1600 pro graphics card,when i fired up the computor the monitor displayed multi coloured vertical lines and a box appeared saying it was in analog mode, how do i configure the targa visionary monitor to digital mode. regds A Gough


I'm assuming "it" is the monitor rather than the video card, and that you are using some flavor of windows as your operating system. 1. Digital vs Analog mode is determined by the cable input plug on the monitor that use. Your cable fr ... PC Desktops

Monitor keeps blank even the power lLED is on green


Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor

No picture from computer to pc


Please check the following things:(i) You're using an appropriate cable to connect the TV to the Computer.(ii) The cable is connected to the out port on the Computer and the corresponding in-port on the TV.(iii) You've selecte ... Toshiba PC Laptops

I have the same problem!


Hi Robert,\015\012\015\012The monitor is on protect mode because an internal fault had been detected.\015\012\015\012To start unplug monitor from power and from computer and test computer with different monitor to find out if it is ... Microtek C893 18.1" Flat Panel LCD Monitor

No Display, monitor won't come on.


Hi try this or the site below\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the monitor if turned on.\015\012- ... Dell Inspiron 1501 Notebook

Screen Don't Comes On Anymore


Have you tried plugging an external monitor into the VGA connector on the back? This would narrow down the problem to either the video card/motherboard or the LCD display itself.There are several possible defects- as above, the display, ... IBM ThinkPad T42 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1907 seconds