Having problems with your Microsoft Xbox 360 Controller ?

On call of duty my right anolgue stick when i go up it looks down when i go down it looks up


Answers :

THE CROSSHAIRS MOVE RIGHT ALONG THE X AXIS AFTER CALIBRATION CAUSING A\015\012PLANE IN FLIGHT SIMULATOR X TO BANK UNCONTROLLABLY TO THE RIGHT. tHE\015\012CROSSHAIRS ALSO MOVE IRRATICALLY WHEN THE STICK IS MOVED HORIZONTALLY.\015\012THIS APPEARS TO BE A COMMON PROBLEM BASED ON WHAT OTHER USERS HAVE SAID.
Repair Help & Product Troubleshooting for Microsoft Xbox 360 Controller

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

On call of duty my right anolgue stick when i go up it looks down when i go down it looks up


THE CROSSHAIRS MOVE RIGHT ALONG THE X AXIS AFTER CALIBRATION CAUSING A\015\012PLANE IN FLIGHT SIMULATOR X TO BANK UNCONTROLLABLY TO THE RIGHT. tHE\015\012CROSSHAIRS ALSO MOVE IRRATICALLY WHEN THE STICK IS MOVED HORIZONTALLY.\015\012THIS APPEARS TO BE ... Microsoft Xbox 360 Controller

Right anolog stick control on call of duty 5 is messed up


Sounds like its INVERTED....chk your control setting and set it the opposite of what it is and try that. ... Microsoft Xbox 360 Controller

How do I tell me emachine T5212 to recognize newly installed ram?


The Ram specifications for your model are: 1024MB DDR2 (2 × 512MB), 533MHz (PC4200)Expandable to 2GBIf you are using Microsoft Windows, the operating system will recognize the memory by itself, there is nothing you have ... eMachines T5212 PC Desktop

Moving when i play call of duty world at war i try to look up but the screen goes down. when i try to look down the screen goes up. WHAT SHOULD I DOOOOOOO?


You need to go into the options menu, and change your controller configuration to "Normal" or "Non-inverted" view. The two ways to control looking up and down in a game are usually called "Normal" and "Inverted". Normal goes up with you push up. I ... Microsoft Xbox 360 Controller

Need to replace screen hinges - Acer Aspire 9500 Notebook


Tools Needed\015\012\015\012Fine Phillips screwdrivers, two sizes; a fine flathead\015\012screwdriver; a big heavy-duty set of locking pliers to get a grip on the\015\012barrel of the fine screwdrivers in two instances; screen wipes; a clean\015\012w ... Acer Aspire 9500 Notebook

Sakar camera driver


Went to the site, had to download an alternate cam driver, looked just as cheesy, so I figured it may be the same thing. The company is probably Chinese, and they don't care what happens when it gets to the United States-I mean that too. The driver s ... Computer Utilities & Maintenance

How to copy a file from PC to Cruzer and how to stop it, then take it off? I am the new user, I need to know the instructions about start, copy and finish. Then I take it off the PC. I don't have the instructions. I want ti use it safely, so I like the know the operation procedures and use it properly. Thank you your help!


Isn't Cruzer the trade name for a SanDisk memory stick? It fits in the USB port of your laptop and becomes a drive letter that you can see when you click on My Computer. \015\012\015\012There are several ways to copy a file. If you kno ... PC Laptops

Poweredge1300 no post


Good news, you can save the machine, although it may take a while. There are a few ways to do this. If you are lucky enough that the boot sector of your BIOS didn't get corrupt and your computer still posts and you can put in a floppy. Then all you ... Dell PowerEdge 1300 Server

CALL OF DUTY 2


Update the newest driver from logitch & use the profiler to configure the pad....FYI it is hard to aim if you have the stick configured to look around\015\012 ... Logitech Dual Action for Pc (963292-0403:) Game Pad

I have used my Maxtor One Touch 4 external hard drive for about 4 weeks. I disconnected it from my computer at the office, brought it home and connected it to my laptop: blue light flashes on then off, the H/d spins up but the computer does not recognize a connection. I have a 2nd Maxtor One Touch 4 external hard drive and it works fine. I utilized the same cables and still no connection for #1. Any ideas how to make this work? I have important data that must be recovered.


Are the operating systems identicle? Here is the first thing I would look at. Go to "my computer" on your desktop and see if your computer is even recognising the external drive when connected. If it is then its a sotware problem, and at least we nar ... PC Desktops

Tried new power supply but didn't help. (Who knows - maybe I didn't install correctly.) I first thought it was the power switch on front of machine. Was wondering if some easy test for power switch?


Tips from me:1.If your power supply isn't coming on, I advise you to check the 20/24-pin motherboard power cable, connector, and be sure it's down in tight. Make sure that lock tab of the power cable connector, snaps over the mother ... E-Machines eMachines Desktop PC

The left analog stick on my xbox 360 controller is faulty


In this game you must check your settings, you may be set to right handed in which case movement/advance is on the right side and attack is on the left. You should be able to go to settings and change the settings to make the left analog control your ... Microsoft Xbox 360 Controller

How to open my Dell Dimension 4600 to install two new gigs of ram


1) Computer off, and disconnected from power.2) Disconnect all cables leading to your computer.3) Lay your computer down on a table. Lay the right side towards table.(I like to lay a clean, static free towel down on the ... Dell Dimension 4600 PC Desktop

GATEWAY GT5228 I had a GATEWAY GT5228 gave to me because something was wrong with it. But according to the person that gave it to me, the parts are still good. Where can i get something to tell me which part is which? I have an older computer that im going to try to upgrade it some, like the memory, processor, etc...But i dont know what is what inside the computer. Any advice? Thanks.


There is a basic guide i will give ya \015\0121. not all parts are comptable so please check visually before trying to swap them\015\012\015\012a. the large to med size board that everthing plugs into is the MOTHERBAORD or mobo for ... Computer Processors

What are the slots on the front panel used for?


Those are card reader slots.Various types of memory cards can be used. A memory card, (Or can be stated as Flash Memory Card), takes the place of the old Floppy Disks, for one.It is digital. There is no disk inside ... eMachines ET1810-01 PC Desktop

I would like an internal view of eMachine T4150 to be sure everything is connected correctly


There's a bit of a toughie! eMachines doesn't like to give out this information, lyndapalimas, and I don't have one sitting in my shop.eMachines used four different motherboard manufacturers, to my knowledge. TriGem, Intel, FIC, and MSI. ... PC Desktops

Wireless button won't switch to on and i can't access web wirelessly. how to i repair this


Their is a possibility that your laptop went into a low power state, and someone accidentally switched the wireless switch off physically then powered back on. if this is the case the issue would be the laptop had a image of the files and how they we ... PC Laptops

Sticky touchpad/mouse hi thanks or the suggestion. I finally got in the right menu but I didnt see any way to fix my problem. The problem is that my touchpad/mouse gets sticky and erratic --so it is impossible to navigate it sometimes. So I was looking for a way to fix this particular problem. Thanks cherry


This is a long shot but try it. It can only help. It will not hurt at all. It could be spyware messing with your settings. Stick with me on this and I will keep hwlping until we figure it out.\015\012\015\012 Turn the system restore ... PC Laptops

Left analog stick click will not work


I might be able to help this may just be a controller defect meaning the controller might not work.. but first go on to your setting than look for controller setting change the controller setting then change it back to the one you were on ion the ... Microsoft Xbox 360 Controller

Xbox 360 left analog stick


I might be able to help... go on to setting go to controller setting and you will have multiple different ways your controller will work look at the one it is at before you change it then try different controller setting if that diddent work write b ... Microsoft Xbox 360 Controller

Hi, I got a serious problem with my PC. The PC was working as "normal", but the monitor display was not "perfect" :-). So I went to control panel->display->setting->advanced->monitor. I cannot remember what exactly I have done, maybe I disabled the only monitor, which is the "default monitor". Then the computer automatically re-started. When the window come-up, there is no display on the screen. I think the computer was started correctly, but just no display. By now every time when the computer


Mike,\015\012\015\012I'd have to know the manufacturer and model of your PC to know for certain if this is the case. But based on the information I have, heres what I think happened.\015\012\015\012Your 1st symptom sounds like ... PC Desktops

My sgc2909 profile editor doesn't work. even when used with word


Its not the controller, its the game... or more specifically any recent PC game Microsoft tried to advertise its Xbox controller in. I bought the same controller you did, and ran into the same problem for GTA IV ... PC Desktops

How do you get the door open to install a battery in the satellite 1415-S173? I need to add more memory and I was told to first take out the battery. I can't get to the battery.


Someone IS Definitely mistaken, or perhaps you inadvertently have misunderstood them.You don't remove the battery to get to the Ram Memory. AC adapter removed, (Charger), turn the laptop over on it's top.Bottom facing y ... Toshiba Satellite 1415-S173 Notebook

How do you open a compaq presario sr1630nx computer to install memory upgrades


Viewing the back of your computer, you will see a large thumb screw, on the right side of the computer case.It's to the right of that round ventilation opening. (Round shape with multiple holes in it)Unscrew the thumb screw to the L ... HP Compaq Presario SR1630NX PC Desktop

When i run project igi it tells me ihave no d3d drivers


Check the Following Things:1.) Does your computer play 3D Accelerated games normally without a problem. (Example: World of Warcraft, Call of Duty, Fable, Grim Fandango, Grand Theft Auto) If so than your D3D drivers are install ... Dell OptiPlex 330 Desktop Desktop Computer
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7105 seconds