Having problems with your Mag Innovision LT776s 17" LCD Monitor ?

MAG 780 Innovations LCD Monitor

\015 LOL... am an old lady. Have adapter power cord to the monitor but can't seem to find where to connect it to. Appreciate the help.\015

Answers :

The plug end (to the monitor) is a partial square end with three top angles. That plugs into the back of the monitor. You can see the plug socket from the underside.
Repair Help & Product Troubleshooting for Mag Innovision LT776s 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

PC or monitor, signal problems


Your monitor is telling you it's on it's last legs..either that or your compaq has a bad video section. either is more vital than a video cable being loose. ... PC Desktops

Pavilion dv6600 dimmed lcd monitor


You could have a faulty inverter or a CCFL lamp, To determine if you have a LCD screen, inverter or video card problem, read this and follow these instructions. Defective CCFL backlight, it may have the following symptom: Screen flashs on red/p ... HP PC Laptops

Mag monitor doesn't display bios post


The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors

MAG 780 Innovations LCD Monitor


The plug end (to the monitor) is a partial square end with three top angles. That plugs into the back of the monitor. You can see the plug socket from the underside. ... Mag Innovision LT776s 17" LCD Monitor

Display AL 1717 input not supported


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Acer AL1717 17" LCD Monitor

Monitor turns off after 4-5 seconds


Hi every one, i hope this helps and am proud to say/or not that i am now using my philips php-19x (aka proview 900w/Mag LT916s Model 900p/ Xerox) and yes turn on the monitor 2 seconds screen goes black and the ... Computer Monitors

Mag monitor doesn't display bios post


I have no experience with the DVI links because such technology is still unavailable here in Argentina. We have DVI video cards but finding a suitable DVI monitor is another (long) story.I think that your card (that has 2 DVI ports) is initiali ... Computer Monitors

Unable to install AL1916w lcd driver in xp


I buyed the new al1916w lcd monitor ,i tried to install the driver for it.i also downloaded the driver from acer site ,when i looked in device manager ,i found two plug and play monitorplz check this link<a rel='nofollow' h ... Acer AL1916W 19" LCD Monitor

Dual monitor, Intel 82915G & nVidia RIVA TNT2 64, FC6, Dell Gx520


Here is a little guide for setting up dual monitors with fedora core 6: http://blog.taragana.com/index.php/archive/how-to-setup-dual-monitors-on-linux-fedora-core/I haven't had to use duals monitors with Linux yet but if this doesn't work ... Dell OptiPlex GX280 PC Desktop

Two monitors blank, but on


<table x:str="" style="border-collapse: collapse; width: 124pt;" border="0" cellpadding="0" cellspacing="0" width="165"><col style="width: 124pt;" width="165">\015\012<tr style="height: 14.25pt;" height="19">\015\012 \015\012<td ... Acer AL2216WBD LCD Monitor

Monitor problem i have a mag innovision monitor, it comes on for 1 sec. and goes off and in about 3 to 4 minutes come back on for 1 sec. and goes back out.


My monitor is 17'' lcd...... mag innovision model: LT716s..before was working well but now the lcd monitor don't to turn or either the led doesn't turn or make any sign.... no matter whta the lcd stay blak,,,,,do not want to turn on.... ... Mag Innovision LT976S 19" Flat Panel LCD Monitor

I have a MAG INNOVISION LT765s LCD monitor. When the computer boots up, the power button on the monitor won't stay on so the display won't come on. It sometimes takes an hour of fooling around with the power button to get the display. I've searched for drivers. My computer tells me it is a PLUG & PLAY and no drivers have been installed.


I have had similar problems with my Mag LCD monitor. I recently dicovered that the problem was with the adapter and not the monitor. Try replacing the power adapter. ... Mag Innovision InnoVision LT765 17" Flat Panel LCD Monitor

The power button is violet, the monitor won't work


Robyn_e_fox, Here is what I would try to do first if my 12 to 15 month old LCD monitor started doing STRANGE things!! If possible try to substitute a KNOWN GOOD monitor in it's place to make certain that your PC is working properly. If PC is OK then ... Computer Monitors

Xenon LCD monitor will not turn on..


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Dell E173FP 17" LCD Monitor

Display goes blank when brightness is above 70 percent


This is a generic symptom that could happen to any LCD\015\012monitor.\015\012\015\012The following is a generic answer applicable to most.\015\012\015\012\015\012\015\012Two possible causes are bad capacitors or a bad light inside\ ... Mag Innovision LT776s 17" LCD Monitor

I turn my l300 on and than stops at toshiba leading innovation. it won't do any thing when i press f2 or f12 thanks


I have had this problem several times with other Toshiba notebooks to the extent I almost cringe when anouther person tells me they are once again having the same problem. Hopefully, the following steps I give you will correct your problem... if not ... Toshiba Satellite Pro L300-EZ1005X Notebook PC

I need sofware of my viewsonic


The links below are two picture of the CD came together with the viewsonic monitor.http://i590.photobucket.com/albums/ss3 ... ViewSonic VX2235WM Monitor

MAG Innovision LT1919WDb flat screen goes black


When a monitor works for a few seconds or more and goes black it is a problem with the power inverter board over heating because of a bad capacitor or capacitors that are not the right size. There is no problem with the VGA controller since it shows ... Computer Monitors

Monitor black screen


I experienced a similar problem with my MAG LT776s. As a "band-aid" fix, I have found that if I turn the monitor brightness to near zero my problem is minimized. Meaning - the monitor goes on after a little wait (~ 20 sec) and will stay on. ... Mag Innovision LT776s 17" LCD Monitor

SCREEN GOES BLACK OFF AND ON .....


It's a common problem with sony hs75pthe problem is with the power board's transistor in the monitorpeople might try some stuff and may get some results, but trust me it's all luck...i had the same problem, so i gave my ... Sony SDM-HS75P/S 17" LCD Monitor

Monitor not working...sorta


Sounds more like the backlights ... Mag Innovision LT776s 17" LCD Monitor

E207WFPc Dell Monitor goes black after seconds of poweron.


Hi,\015\012 The problem you have mentioned may not be due to contrast setting but the LCD itself . Power on the mointor and disconnect the signal cable from the back. if you see a self test box running on the LCD , the LCD is oK . If you donno ... BenQ FP92W LCD Monitor

Monitor goes blank automatically after about 40 minutes...


Hi Randygui,\015\012\015\012Sounds like the back light inverter board is bad.\015\012\015\012It's a very common problem.\015\012\015\012LCD's use four small cold compact fluorescent bulbs to back light the display. (thats what gives the LCD it's brig ... BenQ FP71G 17" LCD Monitor

Need a driver and users manual for mag innovisionLT576s


\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012\015\012 \015\012\015\012ViewSonic (HASU05F)\015\ ... Mag Innovision LT576s 15" Flat Panel LCD Monitor

How to disassemble Mag innovision 19" monitor


Once the 4 screw at the bottom of the screen has been removed the frame surrounding the lcd should slide up and away. The display itself is fastened to the plastic back by 6/8 screws be careful when removing the lcd screen since it is still attached ... Mag Innovision LT782S 17" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3847 seconds