Having problems with your Mag Innovision InnoVision LT765 17" Flat Panel LCD Monitor ?

I have a MAG INNOVISION LT765s LCD monitor. When the computer boots up, the power button on the monitor won't stay on so the display won't come on. It sometimes takes an hour of fooling around with the power button to get the display. I've searched for drivers. My computer tells me it is a PLUG & PLAY and no drivers have been installed.


Answers :

I have had similar problems with my Mag LCD monitor. I recently dicovered that the problem was with the adapter and not the monitor. Try replacing the power adapter.
Repair Help & Product Troubleshooting for Mag Innovision InnoVision LT765 17" Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor flickring Hi All, i am using the mercury (intel 845 gl chipset) mother board and i installed latest graphic drivers from intel site and i changed my monitor refresh rates also but my monitor gives flickering i tested My cpu with my another freind's monitor but there also gives flickering and i am sure that no magnetic devices are near to my computer and i checked the all power cables and i replaced the all power cables also but it is giving flickering, my monitor is flickering while in t


\015\012Flickering screen display Flickering on the screen can be caused by defective hardware in the computer or by improperly installed software, but it can also be caused by interference from external device ... E-Machines E17T 17" Flat Panel LCD Monitor

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

The monitor turns off and on repeatedly.


There are lots of reasons why it can shutdown, but happerlly none should be serious. It may be that the B+ or Power supply is too high, look for a pot near the power supply and try turning it down a bit. Also the x-ray protection may be too high, loo ... ViewSonic VE710b 17" Flat Panel LCD Monitor

I have a MAG INNOVISION LT765s LCD monitor. When the computer boots up, the power button on the monitor won't stay on so the display won't come on. It sometimes takes an hour of fooling around with the power button to get the display. I've searched for drivers. My computer tells me it is a PLUG & PLAY and no drivers have been installed.


I have had similar problems with my Mag LCD monitor. I recently dicovered that the problem was with the adapter and not the monitor. Try replacing the power adapter. ... Mag Innovision InnoVision LT765 17" Flat Panel LCD Monitor

HP Pavillion dv9500t lcd screen is extremly dark. I can barely see anything once it is booted up. I can hook up an external monitor and the laptop functions properly with exception of the laptop screen. I have gone through all of the hp recommendations to check. Is their a backlight lamp or something that I can replace? Iam not familiar with the new ultra bright screens.


From the Windows desktop, hold the fn key and press the f7 key to increase or the f8 key ... HP PC Desktops

Backlight only stays on for a few seconds on compaq c700 that is only a year old


When the external AC power supply is unplugged from a notebook, the LCD display will dim to conserve on battery power. During times of heavy battery power operation; such as during the startup or boot process, the display may be very dim or barely re ... PC Desktops

To joecoolvette reguarding 2005 compaq presario SR1000 and Dell LCD TFT monitor. The dell monitor was part of my mothers comp and I wasnt given a CD with it. Im sure she dont have it now. As far as the graphics card I plugged the card in first then I ran the disk.


Jason,When a device is installed, Windows 'Breaks it's neck', to find a compatible driver, (Or drivers)If THE driver is not present, then Windows will match up one of it's thousands, of generic drivers it has on hand.The ... Compaq Presario SR1000T (568657) PC Desktop

HP dv1000 monitor just stopped working.


Description\015\012During the startup or boot process of the notebook, the display is very dim and barely readable. It remains dim when it reaches the Windows desktop. \015\012\015\012Restart the notebook with AC power\015\012Perform the following st ... HP Pavilion dv1000 Notebook

DV8309 power up problem: blue lights on for few seconds then off


The inverter inside the lcd panel is most likely your problem. Try removing the whole lcd screen from the laptop if you are capable and run it with the external screen to confirm. leave the lcd switch off (this lcd switch above the power button turns ... HP PC Laptops

My computer wont open windows


Step 1: Removing recently added hardware\015\012Use the steps in this section to disconnect any recently added hardware and test for the error. \015\012NOTE: If a new internal device (sound card, hard drive, or other) was ad ... Compaq Presario 5000 PC Desktop

If we close the screen a little bit it goes bright white. Have to switch off and restart. Also, after doing a power point presentation the display is only opening about 80% of full screen with a black strip down the right hand side and 1/2 inch grey at the bottom. How do we display the screen to be 100%? Thanks


Installing the correct drivers for the GFX card and setting the correct NATIVE RESOLUTION should fix that issue...\015\012\015\012\015\012\015\012Try playing around with other resolutions (right-click empty area of\015\012Desktop->Properties ... ASUS PC Desktops

Have just replaced CRT screen with brand new 24- inch Acer V233H LCD widescreen monitor. Couldn't get the recommended resolution, so installed SiS v3.90 driver, (the latest, I think), but my SiS Utility / Support Modes only shows CRT - the LCD part is grayed out. What SiS driver do I need for LCD? Acer says to use 1920 x 1080. I can get this setting with the new driver, but now my Desktop is way longer than the actual screen, and I have to "scroll" left and right, with the mouse, to get to e


Right click anywhere on the desktop\015\012then on the window properties.\015\012then on settings. You should now be seeing your display properties.\015\012Check the slider along the lower left to see if it matches the 1920x1080 ... Acer V233HBD Monitor

Massive series of problems with IBM Thinkpad


Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook

Laptop won't boot (display problems)


If the diagnostics displays on the LCD screen but you get no display when Windows starts to load, it sounds like you have a video software driver problem. Try tapping the F8 key when you power on your laptop and boot in Safe mode. If it work ... Dell Latitude D800 Notebook

When I push any of the following buttons menu, speakers or the auto select nothing happens all I get is the following message OS-Sperrung


HI,Initially, try connecting the monitor to another computer to check if its driver or monitor problem.If you get the same display even after connecting the monitor to different computer ist problem with the monitor, so follow STEP 1. ... HP Computer Monitors

Computer Screen turns black, Computer still runs.


Brownsterz,\015\012\015\012This sounds to me like the game, caused a fault in your video driver that somehow adjusted your resolution/refresh rate to something beyond your monitors range.\015\012\015\012If this is the case we ... PC Game Controllers

No display on SyncMaster 710N


I used 2 resistor of 100 ohms (1/8W) to make one of 50 ohms. Like others instruction, just put the 50 ohms resistor between pins 5 and 6 of this chip and the problem is solved. ... Samsung SyncMaster 710N 17" LCD Monitor

Emachine destop not recognising acer lcd monitor


It sounds more like the computer isn't starting up. The "no signal" message is coming from the monitor itself to tell you it's on but there's nothing coming in to display. Normally no special drivers are required for the monitor, and you'd see at lea ... Microtek C593 15" Flat Panel LCD Monitor

How do you get a computer out of preparing to run system set up? it stays stuck there


Before you start looking at reinstalling Windows you need to back up your important data – just in case anything goes horribly wrong. \015\012\015\012\015\012Reinstallation\015\012loadTOCNode(1, 'summary');\015\012\015\012\015\012\0 ... PC Desktops

My system did an automatic update. Now I get a message that says that my backweb-137903.exe has been moved and so my HP center does not load. I looked for the file but it is not present on my PC. I also get a message that windows installer has been moved or is not present


This error message probably occurred, because a spyware removal application incorrectly detected the Updates from HP Connections or Compaq Connections client software (developed by BackWeb Technologies), as spyware and improperly removed it. Since on ... HP PC Desktops

My MX6453 won't turn on


You may have turned off the LCD screen. After you turn the computer on, hit Fn+F4 keys and then wait a moment. Then try it again. The F4 key cycles the video output through three settings: from LCD only, to external monitor only, to LCD + external ... Gateway MX6453 Notebook

LCD Flatron 21inch going into power save mode problem


This is not a problem with the monitor, it looks as your computer is not sending any video signals to the monitor thus it goes into saving mode. Take a look at the computer, check the video card. Pull it out then turn it on, turn it off again and pla ... LG 22" FLATRON LCD Monitor

Computer in black screen, no energy outputted


A few possibilities(the only problem is if you never get any display to try many of these suggestions):\015\012\015\012-Suspend. With suspend, everything is put to RAM and the computer goes to low power state, shutting off USB, HD, and most other thi ... E-Machines eMachines T3830 PC Desktop

X191w blank screen after 2 seconds


Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Display AL 1717 input not supported


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Acer AL1717 17" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2208 seconds