Having problems with your Logitech MOMO Force Wheel And Pedals Set ?

I need a power cord for a momo steering wheel

Answers :

You just need to get yourself a DC adapter with 24V 0.75A output.
Repair Help & Product Troubleshooting for Logitech MOMO Force Wheel And Pedals Set

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power supply for logitech driving force steering wheel

It's OK to use a power supply with a bigger current capacity than needed. If you find once with, say, 24V and 1.0A then that's usable - the wheel will draw as much as it needs.Therefore:Same voltage (24V)Same or greater current (=&g ... Logitech DRIVING FORCE FEEDBACK STEERING WHEEL W/PEDALS USB FOR PS2 (VGITECHWHEELPEDALSUSBPS2)

G25 ps2/ps3 no steering..buttons & pedals ok

Hi Guys, I have found your solution. If all the buttons work, but the\015\012steering does not, it's because the buttons are powered by the USB\015\012bus. The electric engine of the wheel need really juice from the power\015\012supply. I have just ... Logitech G25 Wheel And Pedals Set

I need a power cord for a momo steering wheel

You just need to get yourself a DC adapter with 24V 0.75A output. ... Logitech MOMO Force Wheel And Pedals Set

G25 wheel not responding

Hey! I had a similar problem! Only the weel tried to calibrate itself, but itjust "twitched"So I tried replacing the power cord with a similar one from an older wheel. Didn't work for me.I opened it up and voilá, same p ... Logitech G25 Wheel And Pedals Set

G25 steering wheel not working

Feeling pretty silly. hadn't plugged in the power supply. usb was enough to drive the buttons and the pedals but not the steering. plugged in the power and hey presto, its all good. \015\012\015\012perhaps the gt4 prob is indeed a power s ... Computer Games

Need power supply for the red logitech momo force feedback steering wheel. Can U help?

1/4" 24 Volt dc (center pin is positive) at 0.75 A or more.The device will only use what amperage it requires. ... Logitech MOMO Force Wheel And Pedals Set

I have a hunter J111 alignment machine. When I go to set castor and you get to the screen that shows all four wheels are lit up green and even numbers then when you are supposed to turn left as soon as you do then the left front sensor starts blinking the red fault arrow and will not change, If you turn the wheels back to the front you get the all green lights and numbers back. If you stick your hand in the IR beam it takes the numbers from 150 down to 30 then remove your hand the numbers and gr

I have extensive knowlege on this machine. If you are still having the problem, there are very few things that could be causing it, assuming that it is a conventional problem.\015\012\015\012This is NOT a software program. For all of you ... PC Desktops

Canon MP600, The error says, The paper is jammed. Clear the paper and press okay. I have cleared the paper put the error won't clear to enable me to print

Check for Obstructions in the Auto Sheet Feeder (ASF) \015\012 \015\012If paper does not reach the Paper Edge Sensor, the LCD will show [LOAD PAPER]. \015\012\015\012 ... PC Desktops

Need power supply for Logitech Momo Racing Wheel

Power supply is 1/4" 24 volt dc (center pin positive) at 0.75 A. GL on the allthread post. ... Logitech MOMO Force Wheel And Pedals Set

Power supply 4 logitech momo wheel force

Powersupply for logitech momo. isLogitech Ac adapter P/N: 190211-a110 Model: ADP-18LBInput Ac 200-240output: 24v --- 0.75ANote this is the europe version. ... Logitech 963339-0403 (9633390403) Wheel And Pedals Set

I purchased the logitech-momo racing steering wheel and pedals secon hand but there is no cd to use for activation? Can you send me a way to download information so that this equiipment may be used??

This is the MOMO Racing Force wheel right?\015\012\015\012Here is the download link for that device specifically:\015\012\015\012 ... PC Desktops

I need help in how to connect my interact v3 steering wheel to my PS2.I plugged it in and there is a power on but the wheel does not steer the cars.

... InterAct Accessories InterAct Piranhapad Enhanced Design (SV-231A) Game Pad

G25 / Midnight Club Run LA Compatibility issues

... Logitech G25 Wheel And Pedals Set

Acer AL1916 can't start

If you press the power button and nothing comes on at all then something isn't providing power to the laptop as it should and you may likely need to replace the battery or the power cord.Find a replacement battery. Change your battery wi ... Acer AL1916B 19" LCD Monitor

I need power cords for my monitor

The monitor needs a power cord and a signal cable. The power cord is a standard 3-prong detachable cord just like the one on nearly every desktop computer and many other electronic appliances.The signal cable may be one of two types, depe ... Dell UltraSharp 1704FPT 17" Flat Panel LCD Monitor

Monitor started getting distorted, now laptop will not power on at all

Kudos to PC Pro Techie: what was true then (2009) is still true.I would like to add 5 quick steps, no tools required, no degree needed, to try first, prior to the owner risking the loss of a few of those 52 tiny, mostly different, screws which, ... Gateway PC Laptops

Can't set up network w linksys modem

Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops


First, you do not need to replace the motherboard. What you are describing is a very common problem for HP notebooks. You can buy the part on eBay for about $5.00, usually with shipping! It will take a while to take the machine apart - and you must b ... HP Pavilion ze4125 Notebook

When I push the on button on my Gateway M-6843 laptop, all that happens is the battery LED on the front flashes 4 times an stops. The power LED does not go on. I purchased a new AC power cord adapter but no difference. The same thing happens with both the power cord plugged in an the battery in place or with the battery only in place. The jack seems fine. Is the battery dead or is this a motherboard problem? I don't want to purchase a new battery and find out that it's a motherboard problem.

We need to know what is defective and what is not. \015\012\015\012Remove the battery from the laptop.\015\012Plug the power cord to the laptop and plug it to the wall power outlet.\015\012 ... Gateway M-6843 Notebook

Power cord connector

From your description it sounds like the motherboard power connector is either broken or needs to be resoldered. That will require that the laptop be completelty disassembled as you need acess to the connector pads to solder. The connector is cheap b ... HP ZD7168CL Notebook

19' Westinghouse Monitor - Intermitent come on.

The problem is either with the power cord itself (especially if it is connected to the monitor such that it stays bent all the time), or the problem might be with the socket into which the power cord plugs in the monitor. The solder joints fixing the ... Westinghouse 19" Widescreen Flat Panel LCD Monitor

I need a new power cord for a dell inspiron mini 10 netbook. I THINK it is a 30 watt cord but am not sure. Can I replace the cord with a 65 watt cord?

No, do not try a power cord that has power ratings beyond that of your current cord. That can and will most likely fry your motherboard; especially if the power ratings are way different. On your current power adapter it should tell you what the outp ... Dell Inspiron Mini 10 Notebook

Toshiba A205 won't charge unless I physically hold cord in

The most likely problem is the power socket on the laptop, it may be just a dry solder joint and needs to be resoldered or it may be faulty and needs to be replaced. Either way to fix this, it requires the laptop to be dismantled to get at this power ... PC Laptops

Laptop not powering - HP6710b 2.1GHz 15.4 160GB 5400 PC Notebook


I Need to locate the laptop reset button on it

It may be that you need to reset the power cord transformer. Disconnect the power cord from the laptop. Disconnect the AC power cord from the transformer. That is the black block that joins the two cords. There is a green LED on it. Wait until t ... Dell Inspiron 1000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8786 seconds