Having problems with your Logitech Extreme 3D Pro Joystick ?

I need calibration software for the logitec 3d pro joystick. will not maintain level flight in AP (flight sim ).


Answers :

This was not originaly my post but i saved it.and it worked for me.\015\012 \015\012HOW TO CALIBRATE THE LOGITECH EXTREME 3D PRO JOYSTICK
I just figured out how to calibrate this joystick. I am using Windows XP. I assume it will work with all Windows operarting systems \015\012though.

Go to Control Panel, click on "Game Controllers", or however you get to your joystick settings. Hold down the "Ctrl" (control key) and the "Shift" key together - at the same time, THEN click your mouse on the "Properties". This should take you to a different calibration screen that you would get to without holding the two keys together. IMPORTANT - Click on the "Test" tab first. If you go to the settings tab first, it likely will not work. Without doing anything else after clicking on the "Test" tab, next click on the "Settings" tab. Then click on the "Calibrate" button below. Click "next". Click the thumb button on the left side of the joystick which should bring you to another screen. Then follow the prompts......
* On the "axis calibration", move your joystick in full circles, making sure the "+" symbol moves around the far margins of the square. After a few complete circles, click the "next" button with your mouse.
* On the next screen, click the left button on the joystick again, which should bring you to the next screen. Move the throttle lever back and forth a few times. Then click "next" again.
* On the "Z rotation screen", move the joystick to the left and right (rotate it) a few times. Then click "next" and then "finish" then "ok". Thats it. It should be calibrated now. Hope this helps everyone with problems.
Repair Help & Product Troubleshooting for Logitech Extreme 3D Pro Joystick

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I need calibration software for the logitec 3d pro joystick. will not maintain level flight in AP (flight sim ).


This was not originaly my post but i saved it.and it worked for me.\015\012 \015\012HOW TO CALIBRATE THE LOGITECH EXTREME 3D PRO JOYSTICKI just figured out how to calibrate this joystick. I am using Windows XP. I assume it will work with all Wi ... Logitech Extreme 3D Pro Joystick

PC BOMS OUT AFTER ABOUT AN HOUR OF FLIGHT OF FLIGHT SIM 2004


I think the change of joystick is coincedental. Sounds like the PC itself has developed a problem such as overheating due to fan going bad or a power supply/hard drive fault. The game is obviously stressing the computer to the point where it's suffer ... Logitech EXTREME 3D PRO TWIST HANDLE JOYSTICK USB (VG3DPROTWISTJOYSTICKUSB)

Ts290 Pro joystick not working with Wondows XP game


Gidday , It is probably not compatible with Pacman. I suggest trying it with a flight sim or some racing game to see if indeed it is working . But if you have installed it properly and it works in the calibration stage it should work in racing,fligh ... Saitek ST290 Joystick

Logitec Joystick 2.4 wireless on a mac is frozen in calibration window of the flight simulator. In Mac there was never any instruction, etc, worked after just plugging in. After 2-3 days froze.


I would remove all the files and reinstall the software and drivers, the driver is corrupted and needs to replaced with a fresh install. I looked on the Logitec website and i did not see support for any of the MAC operating system ... Logitech Cordless USB Freedom 2.4GHz Wireless Joystick - 963283-0403

The Software I just bought a Sidewinder Force Feedback 2 joystick at a garage sale for so cheap it wasn't funny. I'm fairly certain it has some problem but until I can find the software for the thing I can't check it out. The microsoft website, oddly enough, has the software for the original force feedback stick that is for win 95/98. But there is no sign of the software for the new stick. Where can I get this software?


I picked up a Sidewinder Force Feedback 2 joystick at a thrift store. I was having the same problem getting the joystick working on XP Pro. XP wasn't seeing the joystick. On a wim I tryed the Sidewinder on my Dell laptop (OS 98se) and it worked fi ... Microsoft SideWinder Force Feedback 2 Joystick

Logitech Extreme 3d Pro Calibration problems.


Hello There, \015\012Also dont' I meant NO, Do NOT install the software that came with the joystick, it lure a lot problems on calibating and others.\015\012use the game control panel on windows instead.\015\012good Luck ... Logitech EXTREME 3D PRO TWIST HANDLE JOYSTICK USB (VG3DPROTWISTJOYSTICKUSB)

I recently purchased logitec extreme 3d pro joystick and a user manual did not come with it. How do I get one?


Did you purchase it open-box or second-hand? If so, you shouldn't be surprised at the lack of a manual. If you bought it new, it may not have come with one. I personally have one of these joysticks, but I bought it so long ago that I can' ... Logitech Extreme 3D Pro Joystick

Joy stick will not run on Windows Vista Home. Combat Flight Sim WWII Europe will not run joy stick either. The Programs load OK and the joystick calibration option shows the joystick working. However neither program will allow the joystick to work. I feel like just junking my new computer with Vista and going back to XP were my Flight Sim programs worked.


Ur running FS2000 on Vista? :O ... Microsoft Flight Simulator 2000 Professional for Windows

Serial joystick I've purchased an older Dell Pentium I and put a ISA SB16 card with gameport in the PCI to ISA bridge slot. Windows 95 recognizes with card and game port and software for the joystick enables me to use the joystick in Windows 95 (highest operating system available at the time) environment to calibrate. Problem exists when I try and use the joystick in true dos mode after reboot with popular game loaded Wing Commander's Privateer 2. I am using a boot disk but I am concerned that p


If you have Windows 95/98 its best to run in pure DOS mode \015\012 by selecting Start -> Shutdown -> Restart in MSDOS Mode. Don't use the bootup disk..Sound Card also has to have DOS Drivers for it's Game Port to work. Check Manuf ... Microsoft SideWinder Precision Pro 2.0 Joystick

Use of AV8R-01 with Google Maps flight simulator


My blackwidow joystick would not work in google earth, the sim would just crash. I tried a surgestion to remove the blackwidow software and just run it with the ms hid driver. It now works fine, even the throtle and rudder controls. ... Saitek Aviator AV8R Joystick

Flight Sim X problems with TrackIR 4 Pro


For me service pack 1+2 solved the problem ... NaturalPoint TrackIR 4 Pro - Headtracking system

Gaming joystick will not work on combat flight simulator


There is a fix for several Microsoft combat flight bugs, some of them are about controller compatibility problems.Download the patch from Microsoft here.If ... Saitek ST290 Joystick

Greetings to whom it concerns . I purchased Microsoft flight sim 3 . So far I haven't been able to fly the plane because of joystick issues . The joystick works fine when calibrated .I'm able to use the buttons on my joystick but am unable to use the joystick to fly the plane . I look on the control settings to adjust the sensitivity in the game . When I adjust the sensitivity and narrow zone in the in game settings it defaults back to zero when I exit . Is there anyone who can help me with this


... Microsoft Combat Flight Simulator 3 Battle for Europe for Windows

I have a Gravis Destroyer Xtreme joystick with USB connection. Will this work with other than the game named on the unit? I would like to use it for a flight simulator program called PRO PILOT '99. Do I need a software installation to use this joystick? I have no manula or other.


... PC Game Controllers

No lights no FF for momo


Vista simply doesn't support a lot of game controllers. Flight sim enthusiasts are still amazed that even Microsofts own Sidewinder sticks are not supported by Vista. Don't hold your breath for a patch either, so far Micrsoft haven't shown any intere ... Logitech MOMO Racing Force Feedback Wheel

When I bank right or left with joystick the screen Freezes


To check the joystick isn't the problem, go into control panel game controls, then check that the joystick appears and you can move the cross-hair around on screen, most modern joysticks areauto-calibrating, but you could try running the calibr ... Logitech Extreme 3D Pro Joystick

Hi there, I got a Logitech Force 3D Pro F3D Joystick, It's working great with Windows Vista. I just got a older Logitech Attack 3 Joystick without any software from a friend, can I use my software of the Force 3D Pro joystick for the Attack 3 for Vista. Or do I need to download drivers for the Logitech Attack 3 Joystick. My Email Address:- [email protected] Thanks. Your faithfully, Ollie Olivier


Hi, \012Yes the software is common for all logitech gaming devices, it's called LGS ( logitech gaming software )\012So you can use it for both devices. \012Thanks and have a nice day \012J - ... Logitech Force 3D Pro (963352) Joystick

I purchased the Saitek Pro Flight throttle system to use with my X-Plane flight simulator on the Macitosh. The software that came with the Saitek is for MS Windows. Is there other software or a means to have the Saitek work with X-plane?


Hi,Can you tell me exactly which one of the Saitek Pro flight you purchased. Pro Flight Throttle Quadrant? ... Saitek Pro Flight Yoke System Flight Simulator

Saitek aviator joystick av8r-01


Saitek aviator AV8R.I have a problem with y axis, it's not on the centre. I tried calibrate my joystick, but no chance. I reinstalled my joystick and a first time was ok, but bery short. This is a big problem for my flight simulator! How can I ... Saitek Aviator AV8R Joystick

Saitek pro flight multi panel won't work


Exit present flight to general menue, minimize so you can access the "start" button then go to programms/saitek and select "lauch the Flight Sim 2004 plugin". All will work well.....exect the trim wheel acts in reverse!! ... Saitek Pro Flight Yoke System Flight Simulator

Logitech zero calibration reset method


Have you tried using the Logitech calibration uninstall tool that erasers all joystick calibration from windows.Download and run the Logi ... Apple Logitech Freedom 2.4 Cordless Joystick (T6050LL/A)

WILL NOT CONTROL AIRCRAFT HAS NO LIFTOFF - Logitech Extreme 3D Pro Joystick


I just figured out how to calibrate this joystick. I am using Windows\015\012XP. I assume it will work with all Windows operarting systems though.\015\012\015\012Go to Control Panel, click on "Game Controllers", or however you\015\012get ... Logitech Extreme 3D Pro Joystick

Logitech Wingman Extreme Digital Calibration


... Logitech WingMan Extreme Digital 3D Joystick

Combat flight simulator wont recognize my sidewinder precision 2 joystick on vista but it did on xp?


I am farmiliar with most flight simulators and know that you have to go to settings on the main menu the controls and select joystick, enable joystick and/or calibrate joystick. If this doesn't wok then in gameplay push "alt" on your keyboard if the ... Microsoft SideWinder Precision Pro 2.0 Joystick

Logitech Extreme 3D pro restarts computer


Goto logitech.com \015\012enter your joystick model in \015\012"gaming"\015\012"gaming" then in\015\012"product name"\015\012enter your model joystick,\015\012get updates and software.\015\012reinstall your s ... Logitech Extreme 3D Pro Joystick
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4927 seconds