Having problems with your Logitech Driving Force Pro (963293) Wheel And Pedals Set ?

Bake-gas crossfeed I have 2 pro force wheels with the same problem-after 5 min or so of playing the brake will start to apply and get worse until car will not move. Gas will still work and at times working pedals will make better but not for long until game is unplayable. GT3 GT4 games. thanks Rick


Answers :

The problem is dust inside the pedal potentiometers, just take apart the pedal box, make sure the pedals are facing downward when you remove the bottom cover, otherwise the springs are going to pop out, once inside you will see the inside on the pedals, a couple of springs and two potentiometers (where all the wires connect to) take one of these out carefully and spray the hell out of it with WD40, turning them with your fingers back and forth all the way, put it back in and repeat the process with the other one, make sure they are in the same rotation position when you put them back in and make sure they seat properly before you put the back cover on. this will fix the problem, if problem keeps coming back just take one out and go to your local electronics store and get replacements just make sure you wire them like the originals
If you pause the game you can reset the pedals but unpluging them from the main unit then plug them back in, they will then reset and the you will have another 5 minutes of playing until the brake goes hay wire again.
Repair Help & Product Troubleshooting for Logitech Driving Force Pro (963293) Wheel And Pedals Set

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Bake-gas crossfeed I have 2 pro force wheels with the same problem-after 5 min or so of playing the brake will start to apply and get worse until car will not move. Gas will still work and at times working pedals will make better but not for long until game is unplayable. GT3 GT4 games. thanks Rick


The problem is dust inside the pedal potentiometers, just take apart the pedal box, make sure the pedals are facing downward when you remove the bottom cover, otherwise the springs are going to pop out, once inside you will see the inside on the ped ... Logitech Driving Force Pro (963293) Wheel And Pedals Set

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Computer ranbdomly shuts down


Your last question was very observant. NO, without an O/S, there is nothing to make a anti-virus program run.I suggest the problem in the beginning, was that the laptop was overheating. Once the processor becomes too hot, (Processors have ... HP Pavilion dv4015CL PC Notebook

Dell xps m1530 formatted hdd now it wont boot


You might find part of this general trouble shooting process might help? Especially the part of changing you Primary Boot drive so you can load Windows.\012\012Assuming you are Windows based and not knowing your specific OS? \012 Your p ... Dell XPS M1530 Laptop

Rebooting on Dell D600 Latitude


This issue could be caused by any of the below possibilities.\015\012Software issue or error. Hardware issue or error. Heat related issue. Computer virus. Issue with operating system. Software issue or error ... Dell Dimension 9200 PC Desktop

Instantaneous shutdown with no warnings!


Software issue or errorErrors generated by software programs can cause a computer to reboot unexpectedly or without warning. If you are running Windows XP see the below section "For Windows XP users" before continuing. \015\012If you are not ru ... Toshiba Satellite A105 Notebook

Computer crash and restart - PC Desktops


Windows restarts without warning \015\012Cause:This issue could be caused by any of the below possibilities. \015\012Software issue or error. Hardware issue or error. Heat related issue. Comput ... PC Desktops

HP PAVILION LAPTOP SHUTS OFF AND REBOOTS AFTER A FEW MINUTES


This issue could be caused by any of the below possibilities\015\012 \015\012Software issue or error. Hardware issue or error. Heat related issue. Computer virus. Issue with operating system. ... PC Desktops

Something to know about the 'hive' vice the sole man approach


I don't have any sway with experts, other than I've been here a while and while speaking my mind from time to time I haven't compromised my principles of "Fair Play" and "My business ethics".A lot has been argued about the 'team' or even ... Sony VAIO VGN-N250N/B Notebook

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below


Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

Driver dvd My desktop dvd drive is not working. It shows a code 39 when windows trys to fix


Here goes:THERE IS A RESOLUTION TO THE (CODE 39) WITHOUT having to\015\012go to the registry and everything else in God?s green earth that they\015\012are suggesting. If you are dealing with this, Please read. IT\015\012WORKED!!!!!!!!!Aft ... PC Desktops

Monitor powers on for approx 8 secs then standby.Series of vertical stripes on panel but no image.Guessing the lcd is at fault?


When I applied the solution below, I go stripes when poorly reconnecting the logic board to the plate, and the plate ability to do it job can be effect by bits going on the inverter, wavely screen output etc. The lcd is an assembly kit inside have a ... iiyama ProLite E434S 17" LCD Monitor

Philips 190S monitor - Urgent!


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Philips 190P6EB 19" LCD Monitor

Monitor goes blank less than a second after turning on.


If you put bright light at an angle close to lcd can you see a windows shadow, text icons etc, ie still logic power passing,then .... (from a.n. other) after two weeks searching I finally find doctor living stone http://www.aplusperfect.com/articles/ ... Dell E176FP 17" LCD Monitor

My e-Machine W3115 automatically shuts down multiple times


1) Computer off, and unplugged from power. (Unplug from the surge protector FIRST, then unplug the power cable out of the power supply)2) Work on a table where you have plenty of room.Open the computer case. (Rear of computer, ... eMachines W3115 PC Desktop

Dell Studio 1537 (Vista) Integrated Webcam no longer working??


The issue could be due to a loose connection of the camera above the lcd panel. Try uninstalling the drivers and shutting down the computer. Once done gently press the area around the webcam. Power on th computer. See if you get any new hardware and ... Dell Studio 1537 Laptop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Gateway monitor FPD1975W-UK screen fuzzy lines for a few seconds blue on & off light flashes on and off then screen goes blank also a small current coming through the pc connector cable.


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... Gateway FPD1975W 19" LCD Monitor

When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b


The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Scrolling/cursor problmem on Sony Vaio VGN-C140G laptop


Cursor not moving from one place to other place from my desk top in my sony vaio laptop ... Sony VAIO Notebook

Looking for manual or instructions for disassembly/reassembly so that I can replace the damaged power jack.


I repair a lot of laptops. I have found through the years, that they all seem to follow a basic disassembly pattern. Although access to the cooling tube/heatsink/fan combo, and processor, for some of the laptops, is through the bottom, i ... PC Desktops

Computer Keeps Shutting Down on its own - PC Desktops


This issue could be caused by any of the below possibilities. \015\012Heat related issue. Hardware issue or error. Computer virus. Issue with operating system. Other failing hardware \015\012\015\012Heat r ... PC Desktops

My montior turns on for a few seconds then the screen goes black. if i hit the pwr button it just repeats the process


If you put bright light at an angle close to lcd can you see a windows\015\012shadow, text icons etc, ie still logic power passing,then .... (from\015\012a.n. other) after two weeks searching I finally find doctor living\015\012stone http://www.aplus ... Westinghouse Electric L1916HW 19" Monitor

I have a proview PA-19DKS MONITOR. It hasn't been hooked into a computer yet. But it has been hooked up to cable so my daughter can watch cartoons.Recently, when it is turned on it shows the blue screen for a few seconds and then goes completely black. What could be the cause?


The lcd has three parts, the screen plate(windows)/the logic(vga)/the\015\012inverter(power plug). Parts that go are the backlight ccfl's, behind\015\012the plate, and parts of the inverter, ie capacitors, all three take a\015\012bit of power from th ... Proview PL913S 19" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1174 seconds