Having problems with your LG Studioworks 700S 17" CRT Monitor ?

Monitor LED blinking--no display--How to open the cabinet

\015 Pictorial instruction for opening the cabinet is required\015

Answers :

Most monitors (among the ~2000 I have repaired) have either four screws at the extreme corners accessible from the rear or only two with the other opposing edge snapped in.\015\012Some monitors, will have and extra 1 or 2 screws around the area where the connections are made while others may have only snap-in molded tabs that must be released with a flat-blade screwdriver.\015\012
\015\012Before bothering the monitor, I recommend you substitute another monitor to ensure that the monitor is receiving the signal inputs it needs to function.\015\012Loose connectors and failed video sections can also be the cause as well as a 'lost' driver that Windows has corrupted.\015\012
\015\012I also suggest you leave the monitor unplugged from the AC ine overnight since there are components that can retain hundreds of volts of charge for hours and deliver as really unpleasant shock if you tangle with one of these points.\015\012If the high voltage (horizontal) section is still active, it can deliver around 25,000 volts with enough power to punch a hole through your thumb.\015\012
\015\012A primitive check for the operation of the high voltage is to hold an AM band radio at various points of the housing.\015\012If you get squeals, the horizontal section is at work.
Repair Help & Product Troubleshooting for LG Studioworks 700S 17" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor LED blinking--no display--How to open the cabinet


Most monitors (among the ~2000 I have repaired) have either four screws at the extreme corners accessible from the rear or only two with the other opposing edge snapped in.\015\012Some monitors, will have and extra 1 or 2 screws around the area where ... LG Studioworks 700S 17" CRT Monitor

Monitor LED blinking--no display--How to open the cabinet


Check the vga cable if it is attached properly to your computer. Make sure that the VGA cable is connected to the Video Card that you are using.check in the manual if you need to install the driver first. also check if the mon ... LG Studioworks 700S 17" CRT Monitor

Monitor blinking on off, bought it at a garage sale  cannot get it to work on either of my computers I have a FPD 1976W 19" Monitor and it blinks on and off but when I am on the internet it has never done it. Only when I am off line.


Hi im josh in cebu phils.may i help you? just try this stuff it will help you.\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the ... Gateway FPD1976W LCD Monitor

The monitor would not turn on. Only the orange LED does.


1. Make sure the monitor cable is fully plugged into the computer.\015\0122. If the new monitor works fine, The connection between the previous monitor and the PC was bad. Reconnect the original monitor to the PC and make sure that the connection is ... Hitachi CM772 19 in.CRT Conventional Monitor

Dell E151FPb 15" LCD with power LED blinking.


The problem may be a loose connection. When I turn on my monitor, the green light blinks and a flickering white screen appears for a brief second every time. There must be a loose connection on the power board which may be causing this. The easiest s ... Dell E151FPp 15" Flat Panel LCD Monitor

Hi...just bought a brand new asus CG 5290 and the monitor won't come on....ideas???


Is your monitor power led shows on?If it is not on then make sure power cable connected properly to monitor .Change power code then try.If power led is on then make sure monitor cable is connected properly to cpu vga port.Chec ... ASUS Computer Monitors

Dell 1701FP monitor - power buttons blinking - no display - no white screen


Solution to a blinking orange power light indicator.\015\012\015\012Checking procedures.\015\012\015\0121. Check the fuse on the inverter board labeled F1. If it is opened then your inverter board has a problem. That's why the ... Dell UltraSharp 1701FP 17" LCD Monitor

Monitor is black and when I hit the menu button it displays "going to sleep"


Power up the computer then check num lock led on keyboard when you press num lock key if its led show on and off then your cpu gives display to monitor then make sure vga cable from monitor from monitor to cpu is attched properly to cpu.\015\0 ... HP Compaq FP 7317 17" Flat Panel LCD Monitor

Armada m700 no post


Hello, \015\012\015\012My name is Vikram Kumar Thumu, from India-Hyderabad. I have seen your message on the issue related to Display issue. . I would like to provide my suggestions on the issue. I hope that this should work for yo ... Compaq Armada M700 Notebook

Screen turns black and blue LED is blinking


Sounds like the monitor is being made to show a resolution it does not support. Check the available resolutions the monitor supports and then check what resolution the video card is giving, if it not compatable, you get the black and blue screens. ... LG Studioworks 563N 15" CRT Monitor

Monitor dark for 20 minutes before turning on


\015\012My VL1919 has been having this issue off and on for a month or so now. It happened three times in one day today, so I decided to do something about it. I opened up the monitor and poked around a bit.\015\012\015\012I found three e ... Princeton Digital VL1916 19" LCD Monitor

My monitor is not responding to anything. what can i do aside from rebooting?


Do you see the light blinking in the monitor? I mean the POWER led light up? If so, then the monitor is ok and is working good. It is your CPU which has a problem and not sending digital signal for the monitor to display.\015\012\015\012Try to ... Computer Monitors

No output on Monitor


You cleaned the computer case out with a can of compressed air for computers? You had the computer unplugged from the surge protector? You touched the metal frame of the open computer case, to relieve your body of static electricity?IF so ... AMD (90613) PC Desktop

AL2216W LCD monitor "Power status Green blinking" & No display.


LOOKS LIKE A BURN SOLDER !! , open the monitor , check the PC BOARD around the transformer area , look for burn spot or cold solder , RE solder it , try again , hope this helps please rate solution and thanks AJ ... Acer AL2216W LCD Monitor

Power led is on, but there is no image in screen. the signal VGA cable is OK and Power cable is OK too. Thank you to help me.


When you power up the computer check num lock led status when you pres num lock key if it is on and off then your cpu gives display to monitor so it is screen resolution issue.When you power up the computer press F8 key then enter in "Enable vga mode ... BenQ FP71G 17" LCD Monitor

LG 700E monitor's power LED blinking continueously, no display


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... LG 500LC Monitor

Samtron Monitor 56V Display Problem


Your power supply is probably bad. open the case with it unpugged and look for leaking or crowned capacitors. most electronic repair shops can replace them for you ... Computer Monitors

Blinking of moniter 700e lg


I think that two capacitors in the powers supply circuitry(incise the monitor) has gone bad. Just open and you'll see them.This should solve your problem.Best of Luck.Please rank me appropriately. If you want any clarification, Please ge ... LG Studioworks 700S 17" CRT Monitor

PC Problem, p4 processor, intel D850GB . I think its the cpu


Yes you do buy a new processor but here a tip to work it properly because its old enough your motherboard, when you buy a new processor, bring your CPU to the Computer Center, the company you buy a new processor, let them put it in your CPU. If ... Computer Processors

My Laptop doesnt start at all . I dont know what


1. remove all ext peripherals2. remove battery3. check first the ac adapter if it has led on (make sure ac adapter is not connected to the laptop)4. try any other wall socket check if ac adapter will led stay on5. if ac adapte ... Dell Inspiron 6000 Notebook

All three LED's blinking, no video


Hi, does the three lights blink only after u connect it to a display card??if yes then check if any of the connecter pins are damaged, or check out the display card..bye let me know ... Dell E173FP 17" LCD Monitor

LG 700E monitor's power LED blinking continueously, no display


LG 700E monitor's power LED blinking continueously, no displaySolution............. ... LG Studioworks 700S 17" CRT Monitor

Power light blinking. no other response - Dell E173FP 17" LCD Monitor


The blinking LED mean that the display will not be shown to you and this problem belongs to short circuiting of transistor that are being connected with the mini transformers. The transformers boosts up the voltages for the LCD screen. IF you a ... Dell E173FP 17" LCD Monitor

OPEN A BACK COVER ON MONITER


Hi im josh try this solutions of mine.\015\012Monitor Problems:\015\012\015\012THE COMPUTERS SEEMS TO BE WORKING, BUT THE SCREEN IS BLANK.\015\012- Check the monitor if turned on.\015\012 ... SAMTRON 55V 15" CRT Monitor

ViewSonc VX924 LCD Monitor


Check the information at Viewsonic's website regarding their warranty:http://www.viewsonic.com/support/warranties/limited-warranty/If you have your proof-of-purchase and it shows the monitor is less than a year old, it would b ... ViewSonic VX910 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9474 seconds