Having problems with your LG Flatron L1951S-SN 19" LCD Flat Panel Monitor ?

I came in and it was asleep so I hit the space bar and the light indicated it was coming on and I got a little block on screen that says no signal and then black. I had an old small lcd monitor and it works fine!

Answers :

Smithlanneau, You didn't state that you ALWAYS used the space-bar or even the mouse to WAKE-UP the monitor from sleep-mode. If and when strange things start to happen when using an LCD display, the VERY FIRST PLACE I start looking is in the "switch-mode-power-supply" and or the BACKLIGHT INVERTER circuit that lights -up the cold-cathode-fluorescent-lamps that provide the white light so you can see all the pretty colors on the LCD PANEL. If you reconnect it to the PC and same thing happens you will need to have a Technician evaluate it, but don't sell it to him if he seems eager to "take it off your hands" for $10. I think you should go visit YOUTUBE and view some of the longer (8 to 12 minute) video clips of "LCD monitor disassembly" and "LCD monitor repair" clips to see and also LEARN what the top causes of LCD monitor failure are. Also visit www.ccl-la.com/badcaps.htm , www.lcdparts.net , www.badcaps.net for more info before you do anything else. Sometimes they can be repaired with for less than $6 in parts alone! If this was of some help please rate this response on fixya. I'm 12fixlouie Bye for now.
Repair Help & Product Troubleshooting for LG Flatron L1951S-SN 19" LCD Flat Panel Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Gateway LCD powers on but has no picture

I have a Gateway FPD1730 LCD monitor. When I plug it into my Gateway 500x desktop the power light turns green and then says "Power Saving Mode" and then it goes black. It will occasionally flash on and have a picture and then go off. When I unplug th ... Sceptre X9G Komodo IV 19" Flat Panel LCD Monitor

I came in and it was asleep so I hit the space bar and the light indicated it was coming on and I got a little block on screen that says no signal and then black. I had an old small lcd monitor and it works fine!

Smithlanneau, You didn't state that you ALWAYS used the space-bar or even the mouse to WAKE-UP the monitor from sleep-mode. If and when strange things start to happen when using an LCD display, the VERY FIRST PLACE I start looking is in the "switch-m ... LG Flatron L1951S-SN 19" LCD Flat Panel Monitor

Gateway Monitor keeps going black

Alicia, Your monitor digital board is OK. The problem is with the power supply/ Inverter board(s) in back of the LCD/LPD Panel that you look at. You will need to question Gateway to see if they have a swapout program where you send them $30-$60 and y ... Gateway FPD1760 Monitor

Monitor goes black

Sorry to have to tell you this, but this is common in LCD monitors. The reason that it is going black when it boots is for one of two reasons. You either have a bad power supply that powers your LCD or your LCD's backlight is blown. These can be re ... Acer AL1711 17" Flat Panel LCD Monitor

I have a Cornea 1702. It just stopped working altogether. It doesn't even show the menu nor does it search for a signal as it used to while scrolling thru options or select input! I think it's fried, but I remember some time ago i thought it was all done then it started working again. any thoughts?

OK, first off, I'd like to say that I've never worked on the Cornea 1702, but most monitors follow similar designs, especially generic brand monitors.So there are a few things I need to know: What exactly happens when you press the ... Cornea CT 1700 17" Flat Panel LCD Monitor

Monitor stays on for a few seconds then goes out

This problem is very often caused by dry electrolytic capacitors on the inverter board. If you have some skill with soldering you could try to change them. When buying new ones ask for LOW-ESR capacitors for switching mode power supplies (SMPS) and 1 ... Acer AL1711 17" Flat Panel LCD Monitor

Vx1932wm-3 monitor has stopped working properly,it will only stay on for around 2sec then lose digital signal and go black,same with analog.cant seem to make it stay on,the light on monitor is blue when it says lost signal, the graphics card is working fine 9400 series nvidia

I had the exact same problem. It's a bad capacitor on your power board. It's most likely the 1000uF 25v one towards the center of the board. I noticed it on mine because the top of the capacitor was pushed out more than usual and it has some residue, ... ViewSonic VX1932WM LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Monitor has no picture

Yes! :)Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer."No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer. ... ViewSonic VX922 19" Monitor Flat Panel

When it powers up the screen is fine then it goes black with no signal box, then if you turn it off and on again screens comes back for few seconds and then off again, sying no signal. Viewsonic LCD monitor VP720b

The lcd has three parts the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, all three take a bit of power from the inverter. The self t ... ViewSonic VA720 17" LCD Flat Panel Monitor

StudioWorks 700s Monitor No Signal

Try to connect the monitor to a different desktop/laptop, to see if it works at all.\012\012Try a different monitor on your computer, to see if the video-card in your computer is the problem.\012\012Or, spend $50 to $100 to bu ... Computer Monitors

Problem started with a white screen, now It just remains black, installed my old monitor, works fine, put the KDS back in line, no picture, just black tried on off on the monitor and on the computer, checked and rechecked all connections, it just don't work, put my old Compaq monitor on, fires right up. Trash?

Jimmoser45, Could be trash! Could be a Trade-in on a new monitor! Try to follow me on this will-ya!!! You take your K226WDB to store and maybe get $10 knocked off the new one? Anyhow, you walk out with new LCD display and 1, poss 2yrs warranty. But t ... KDS K226WDB Monitor

The power light blinks solid blue every four seconds or so (it?s off in-between). The screen is blank. None of the buttons on the side function (such as ?menu?). I have a second similar monitor from the computer in the other room I?m using to type this proving the video card and cable are fine. We?ve always (as in years) left the monitor on (w/ a screen saver) but for whatever reason turned it off for four days when we went away recently. The monitor would then not turn back on. After leaving th

Hello,\015\012Two days ago I received a Gateway 900w FDP1975W Monitor from a friend. He told me that he would have to let it rest and it would work for about a hour or so and flash green with lines, then Flashing blue power light, then nothing. ... Gateway FPD1975W 19" LCD Monitor

Westinghouse lcm 19v5 won't power on period

I have a Westinghouse LCM-20v5 that would have problems powering on, and then it would power on for about 1/8 sec and lose the picture. It died 1 year and a few months after purchase. That sucks. LCD screen problems are often caused by the interna ... Westinghouse LCM-19v5 Monitor

When power light is green I have no display on the screen

Dwanlesso6, Please tell me brand of monitor and if it is LCD/FPD and size 15,17 19 etc. If it is an LCD then it is possible that the DC power supply and or inverter board has failed. Here is short PS101 lesson. All electronic things (Stereo, printer, ... Westinghouse L2046NV Monitor

Monitor black with green light on

Did you changed frequency of that monitor? if it is out of factory setting that could be the problem, try to connect it again as secondary and set Hz to default, if that does n't work try same settings on both monitors? i have connected two monitors ... PC Desktops

Sharp LL 172A-B monitor no signal?

... Sharp LL 172A-B 17" LCD Monitor

Scepter LCD not working, can't disassemble

A little late but hey better late than never. I assume you have the screen assembly out of the plastic housing by now. The bar with buttons actually hides two out of the six screws that hold the monitor brackets in place. Pretty straight forward. ... Sceptre X20g-Naga III 20.1" LCD Monitor

LG StudioWorks 700s Monitor NO SIGNAL

First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

Dead pixel I have a black spot on the bottom right corner of the screen..can it be repaired?

\015\012Please read the WHOLE of this guide before starting.\015\012Software Method\015\012\015\012Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them ... HP Compaq WF1907 Monitor

No Signal when desktop wants to load

This is exactly what is happening to my monitor but happens a bit faster. Once the drive starts then the monitor turns on and turns straight back off again. The monitor works on other people's computers (including the tech guy at the shop I bought i ... ViewSonic VA1916w LCD Monitor

Laptop will not power up, hard drive light flashes twice then nothing. model is an acer 9300 about 2 years old, the only thing I noticed before this is that it would never reboot from warn, you always had to power of and start again. sometimes it wold not powere up to the on switch and I had to remove the batterey and power lead and leave it for 5 mins and try again.

Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Acer Aspire 9300 Notebook

I have a gateway FPD2485W tft lcd monitor and i start my monitor and after it shows gateway it then goes black. How can this be fixed

Bonannorl, Maybe it can be fixed. You did not give any history of unit. Only "now" stuff. Is unit covered by Gateway warranty? How old is unit? Date of manufacture? Did unit work fine connected to your pc and this black or black n blank screen thing ... Gateway Computer Monitors

X191w blank screen after 2 seconds

Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?

Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.0843 seconds