Having problems with your LG Flatron L1750S 17" LCD Monitor ?

My aunties monitor ,when she turn it on the monitor the power saving mode appears.

Answers :

That means the monitor is not getting signals from the CPU. courses may be:-
1. the CPU is not working or switched off.
2. the graphics card of the CPU is faulty.
3. the monitor to CPU transmission cable is nit connected.
4. the graphics card may be faulty. or
5. the monitor cpu transmission cable is either cut or the male pins are broken.
Make sure data cable is connected from both end......One from CPU side and other from LCD side.
Repair Help & Product Troubleshooting for LG Flatron L1750S 17" LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Power light on monitor blinks green, monitor is dark

Perform a Monitor self-test to determine whether the issue is with the Monitor or with the Video card of the Computer/with the Computer.1. Turn OFF the Monitor.2. Disconnect the video cables that connect the Monitor to the Com ... Dell Computer Monitors

My monitor shuts down after one second. - Dell Dimension 3100 PC Desktop

Dell monitors automatically go into power-save mode after a preset\015\012amount of time when the computer is inactive. The Dell monitor will go\015\012completely black, instead of showing a screensaver. This doesn't mean\015\012that your ... Dell Dimension 3100 PC Desktop

My 15" LCD monitor TTX went to sleep mode and never return back

Mike_garzan, Your monitor will need some work done on it!! Do you know the "flashlight trick" that every owner of an LCD monitor with "cold cathode-fluorescent-lamps" should know how to do when the BLACK screen of death makes it presence known? Do th ... Elo TTX 9154 15 Inch LCD BLACK W/ RESISTIVE SERIAL Interface Monitor

Cannot get new Motherboard to boot up in Normal Mode

What u may have done is wwhen u were installing the new board, gave a static shock to the system...that will cause only the fans to come on and nothing more...this is a bad problem bc u cannot fix it...if u figure out something else is wrong, and it ... Gateway PC Desktops

New HDD Install Prob

Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Dell Monitor in Power Save mode

Hello there:\015\012i would refer to your users manual to see if there is a power save mode setting on the monitor it'self and to see how to adjust it or contact the manufacture of the monitor . ok ?\015\012hope that this is helpful ... Dell E173FP 17" LCD Monitor

External monitor says laptop is in power save mode and goes blank

Hey jkepthis has nothing to do with power, here is what to do right click your desktop-> properties-> click the settings tab->click the advance button->click the display tab->depend ... Acer Aspire 5610 Notebook

PC monitor warning error of PC entering power saving mode

Hello mamaykyaw,\015\012\015\012The steps below are for Windows XP.\015\012\015\012Go to Start>Settings>Control Panel>Power Options(double click)\015\012\015\012The Power Options Propert ... HP Pavilion a450n PC Desktop

Dell E152FP monitor goes black at startup, but not permanently

My bet is that your monitor is on it's way out. If this is true, it will get worse until it gets to a point where it no longer works at all. Connecting the monitor to another computer should confirm my suspicion. The monitor has probably developed a ... HP W2007 LCD Monitor

My gateway monitor shows a picture for about 1 second then turns to blacked out screen with power light still on. I can shut the power off on the monitor then turn it back on only to have it do the same thing again and again. I have switched to another monitor to check for computer problems, but all of that checks out fine.

Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.\015\012\015\012If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in th ... Gateway HD2201 22" LCD Monitor

The power light glows solid, but there is no display. The screen doesn't come on at all

If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

When turn on the gateway screen apear, but the monitor turn off or black and not apear nothing my computer is gateway profile 4 all in one

Your power settings may need to be changed, it appears to be going into sleep mode or power saving mode.If you are using Vista, Click Start> Control Panel > Power Options > "choose when to turn off display" (in the left hand pane ... Gateway Profile 4 All In One (MPN PROFILE4SE) PC Desktop

When I turn on my pc 170l this message appears on

For that first open cpu cabinet then reattach the RAM memory.Pull cmos cell from motherboard for 10 minutes.Make sure motherboard is not ground with cabinet.Remove pci cards from motherboard if any .Reattach vga card if instal ... Dell OptiPlex 170L PC Desktop

Digital power saving mode

Check your monitor power settings.right click on your desk top then left click on 'properties' in the white box that appears.this will bring up a 'display properties' box which should have a tab headed 'screen saver' amongst o ... Gateway FPD2275W LCD Monitor

LG Flatron - Power button flashing blue

I get a similar thing, i accidently entered sleep mode then turned off my computer at the power button on the back, now i turn on my monitor( i dont get blue flasjhing but it jsut goes on and it doesnt register, then says going into power saving mode ... Computer Monitors

L222WT flatron 21.6 monitor is not working

Power saving is the default the monitor goes into if it doesn't get the correct signal down the cable wires of the computer. There might be three culprits:  (1) the cable between computer and display (most likely), (2) the display itself (unlike ... Computer Monitors

When I turned on my computer, it said it was in power saving mode and to press any key or move the mouse. Did that. Now I have a black rectangle in the middle of my screen that says, "Positioning, Horizontal, Vertical". When it disappears (at random) a light blue box with a white padlock appears, flashing on and off at will (mostly on). Once it appeared as if the lock had opened. Help, please!

Your Problem Is not in your Monitor Its in your CPU. Your CPU is not giving Display Signal to Monitor that's why Monitor goes to power saving mode. try to open Your CPU and remove RAM Clean RAM Slots and Fix it Again. Try to Boot now. ... Dell E172FPt 17" TFT LCD Flat Panel Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Pavilion Dv1000 monitor won't show anything

Power management lets you reduce your Notebook power consumption. Your Notebook has two power management modes:\015\012\015\012\015\012\015\012Hibernation is an energy-saving feature and safeguard that saves informat ... HP Pavilion dv1000 Notebook

My Samsung 943N LCD monitor will work for 1 second and then goes black. When I choose the extended desktop option, for example, it will flash my desktop on the monitor for a second and then go black. I have 2 cords that I have tried this with and it happens with both...and I have 2 computers I have tried it with and it hasn't worked with either...so it definitely appears to be a monitor issue. Because it works for a second I am really confused with what it could be (it's not the graphic card obv

Becky_bitz, Do this first! It is only a "rude&crude" evaluation of the state of the monitor's "switch-mode-power-supply" Reconnect 943N to a fully booted KNOWN GOOD pc that has WIN-desktop showing. Then and only then, turn on the 943N and note w ... Samsung 943N LCD Monitor

My Acer AL1714 monitor was given to me, the person that gave it to me said last time the last time it was connected it work but the monitor had been stored for about 2 years. So I bought a 19V-2.3A power cord and video cable, hooked it up to computer hit the power button the green light comes on 3-5 seconds then turns orange. I unplugged the cord from the surge protector plugged it back up, the word Acer appears on the screen then disappears screen turns black just like before. Each time you tur

Mccampbell71 Probably a failure of inverter circuit(dc to ac 600-1100vac) to light-up (sustain) "cold-cathode-fluorescent lamps" causing the "switch-mode-power-supply" to go into full or partial SHUTDOWN mode. Black Screen of Death strikes again!!! T ... Acer AL1714 17" LCD Monitor

Monitor automatically clicks into power saving mode

I have an LG W2261V, and an old Sharp LL-T19D1-H. The PC runs both just fine, and the PSU has plenty of power. Unfortunately the LG handles power save mode very differently, where the LG would not switch on after entering this mode unless reset (unpl ... LG Flatron L1951S 19" LCD Flat Panel Monitor

How do we turn off the POWER SAVING MODE on the monitor screen?

Try going into your Start Menu then going into your control panel...then clicking on your "power options"....then switching the options to 'always on'..if this does not work..(as it seems you may not be seeing this because the monitor is in power sav ... Gateway GT4010 (RBGT4010) PC Desktop

Samsung syncmaster 711p power issue

Hello\015\012I am a technician-informatic. I have repaired about 80 Lcd Samsung monitors with theese problems. I offer the repair manual.Manual has been done with the experience of the repairing Samsung Lcd monitors. Manual was made by m ... Samsung SyncMaster 931B 19" LCD Monitor

Monitor keeps blank even the power lLED is on green

Try replacin a new display card. If it is fine working.ok\015\012If not try fixing for cold solder in the video section.\015\012I suggest video section according your report the light green LED lighted that shows the power section is doin ... Proview PL913S 19" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9382 seconds