Having problems with your LG Flatron L1718S LCD Monitor ?

Need to remove back cover of LG Monitor

\015 I need to remove back cover of LG Flatron L 1718 S pleasse give me the detail with photo graph\015

Answers :

Pull the front frame around de screen with your fingers carefully and unscrew the screws from the back (if they are any) is not quite hard
All he wants to know is how to remove the back and we get totally irrelevant replies e,g, how to swivel the monitor on its stand, ridiculous !
Repair Help & Product Troubleshooting for LG Flatron L1718S LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Volume control appears on screen uncommanded and cannot be sent away

I had exactly the same problem. The volume up button was constantly on, causing the on screen display to be permanently displayed. Here is the solution to fix it. This will also work for any other front panel buttons that are misbehaving.\015\0 ... Philips 190B6CB/27 19" LCD

Acer AL1917W goes black

I have recently opened my AL1917 (not wide) but it should work the same. First remove the stand. This is done by removing the plastic cover over the stand hinge (which appears to be part of the back cover, but is'nt.) Mine was done with simple tum ... Acer AL1917W LCD Monitor

Volume control is constantly on

It may be a malfunctioning circuit board controlling the buttons on the front. If it's under warranty ship it back to Philips; if not markgladding on this site sent me the following advice. Standard disclaimers apply and any questions or comments sho ... Philips 190B6CB/27 19" LCD

Can't set up network w linksys modem

Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Removal of front cover

To remove the front cover you need to start by putting the monitor down flat on its face on something that wont scratch the screen.Next, remove the screws holding the base to the back of the monitor. (You might need to remove a plastic cover to ... Philips 190B6CB/27 19" LCD

I have a Westinghouse LCM-22W2 LCD monitor. I believe my power board is bad. I want to either replace the power board or bad capcitors, if I can find them. I do not know how to take off the back cover, however. It almost looks as if a special key is needed in the lower left corner of the back cover. Does anyone know how to remove the back cover? Ed

Have you gone through the user's guide? There are some sleep settings and automatic adjustments that this monitor makes, and other changes that users have inadvertently triggered that seem to be causing quite a bit of confusion these days. Make sur ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

Vl1918 it poweres on and shuts off.repeat

Just another voice to say that the solution provided here by others does indeed work.\015\012\015\012Had same symptoms: screen comes on for about a second, a metallic popping sound occurs, screen shuts off for about a second, repeat. Pr ... Princeton Digital VL1918 Monitor

How can i open the 2405

To open the case of DELL 2405FPW (and 2407FPW and many others): first prepare a clean, clear area of bench to work on. A cluttered bench could result in damage to the screen when you lay it flat on its front!a) unclip the panel from its stand a ... Dell UltraSharp 2405FPW 24" Flat Panel LCD Monitor

Gateway lp2207 appears power supply has burn out...is worth repair any suggestion on repair

Actually the problem is one of the capacitors on the power supply.\015\012\015\012 \015\012\015\012I have the same monitor Gateway LP2207 and just replaced the capacitor.\015\012\015\012 ... Gateway GT4010 (RBGT4010) PC Desktop

Vx800 flickers when cold

I have repaired several Viewsonic VX800 monitors. The symptoms include a power light that flickers or flashed on and off or a screen that flashes on briefly or stays off. The problem is bad electrolytic capacitors on the power supply board. These ... ViewSonic VX800 18" Flat Panel LCD Monitor

Notebook with a cracked monitor

Not to sound argumentative, but it's not a useless paperweight yet. You can still connect an external monitor, and toggle over to it.(Connect a VGA monitor, to the VGA connector on the back of the laptop, turn the VGA monitor on. Hold the ... PC Laptops

Optiquest Q9 After about 14 months, my 19" LCD Optiquest Q9 monitor suddenly got very dark ( the bottom 1/4 was still viewable, though dark) and then went blank. After it cools for a while I can power it back up with the same results. There is a faint click when it goes black. I have replaced it with another 19" LCD ( different MFG.) which is working fine, but hate to throw this one away if it is repairable. The screen itself seems fine with no pixels missing at the time it went dark. There are

I had this problem with my Q9 and I was glad to find the FixYa website with help. But I will offer more detailed info for novices to make sure you find the capacitors. First of all, it is not easy trying to find out how to open the monitor up! First, ... ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

How to open the back cover of the LCD monitor

Hi..there,\015\012It's seems you got a backling inverter busted. Need to replaced a new one or repaired it. To repaired you need to replaced a bad capacitors with a bulged on top of each caps. Not sure...just replaced all the caps...:) Ok! to ... AOC LM729 17" LCD Monitor

Faulty Monitor? I bought one of these Xerox flat panel 19 inch monitors to replace my convention Sony unit about 4-5 months ago. It has worked just fine until about 7 days ago. Are there any known problems with these Xerox units? I turn my computer off during the day, when I am at work. I also turn my computer off during the night when I am asleep. At those night times I also turn the 'blue power button' on the monitor off as well, as it will flash annoyingly in the room if left in the 'stand

I have also fixed my wife's Xerox monitor Thanks to all the posts on this website !!! I just fixed it yesterday. It was fairly easy.\015\012\015\012 I layed my on a clean towel. Like they said remove ... Xerox XG-91D 19" LCD Monitor

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.

OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

Removing back How is the back cover removed without braking it? the screen don't work but folckers if you tap it and I want to look inside.

Hi, I used to repair a monitor from\015\012Dell. You might have to check what wrong with your monitor by shining a flashlight into the screen, not directly but find the best angle to the screen and take a look very closely ... Acer AL1716 17" LCD Monitor

Need to remove front bezel to install a touch screen panel onto a samsung 226bw monitor, cant figure out how to seperate the parts

- This is how it went for me..I have a Samsung ... Samsung 226BW Monitor

Screen not coming on

Typical problems with Samsung SyncMaster.\015\012\015\012I just did this to a friends monitor as well, a different model and not much different in build. I think you might have 3 screws on lower back side of cover. Start your separation f ... Samsung SyncMaster 743B 17 inch LCD Monitor

Viewsonic vx800 blinking green light..no picture.....live in los angeles.....who can repair.....is it $ worth it.thanks

I have repaired several Viewsonic VX800 monitors. The symptoms include a power light that flickers or flashed on and off or a screen that flashes on briefly or stays off. The problem is bad electrolytic capacitors on the power supply board. These ... ViewSonic VG800 18" LCD Monitor

Screen goes black

This problem is fixable with no parts.\015\012the ribbon cable inside the back of the monitor most likely is loose.\015\012if when the screen goes black you can tell that the back light is still on inside the screen then this fix is definitely ... HP Compaq nx5000 Notebook

Can't remove cover of Westinghouse LCM-22w2 monitor

Hey Ed,\015\012\015\012 I hope I can help, It doesn't open from the back, it opens from the front.... carefully! There are four support screws, which hold the LCD screen to the desk stand,after removing all the support screws (4) on ... Westinghouse 22" Widescreen LCD Flat Panel Monitor

Monitor turns off after 2secs power light on

Oct 23, 2009- This is how it went for me..I have a Samsung SYNCMASTER ... Samsung SyncMaster 914V 19" LCD Monitor


Hello, if you were told by an expert tha you need a video card, here what you need:\015\0121: You do not have a slot card type video card in your system( Dimension E521) your system has on board video, which you can not remove from the system b ... Dell Dimension E521 (D10E16) PC Desktop

Display not showing reds

Hi,This sounds like it is specific to the display adapter in your PC and not the monitor. Specifically, the area that usually is affected causing a problem like this is the connection of the heavy cable running from your Monitor to the ba ... Gateway EV 910 19" CRT Monitor

IC Power 19'' LCD Product PA192D Model # 900G quit working

I C Power PA192D Model 900G, Mfg Sep '05 19inch LCDI purchased this monitor at Goodwill not working for $20. The 900G power light failed to come on and there was no video when turned on. To fix, first pull the 2 screws at the bottom of the back ... LG Flatron L1951S-SN 19" LCD Flat Panel Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8855 seconds