Having problems with your LG 22" FLATRON LCD Monitor ?

I can't get a signal between my PowerMac G5 and my LG W2061TQ monitor. Not sure I'm using the right cable? I've purchased a DIV-D cable and tried the VGA cable furnished with the monitor with an adapter but can't seem to get a signal.


Answers :

Hello,\012
First we need to know your G5 and monitor are working, independently. Test these items first on known good computers and monitors. If they show working then;
If your G5 is per 1997 then it may be a true compatibility problem. If 1997 or later, then it could be one of several problems.
1. video card not working or not powerful enough or overheating
2. G5 power supply issues
3. video card may need to be re-seated
4. 3rd party RAM compatibility issues
5. try by resetting the PRAM
6. The monitor may have the brightness and contrast set to BLACK
7. The G5 DVI output may be off or failed. 
8. You can try this fix;
Go into System Preferences > Displays > Options (on the 2nd display) and selected "Disable Power Button". Problem solved, if inelegantly.
OR
change the other settings for displays.
9. Using the on-screen settings on the monitor, change to the lowest resolution, then if visible work your way up until it goes blank again.



See some supporting info here:
http://support.apple.com/kb/TA27012
and
http://support.apple.com/kb/HT2707
and

Here is you manual:
http://manuals.info.apple.com/en_US/PowerMacG5_UserGuide.pdf

Good luck
There is a possibility that you graphics card is needing replaced
Repair Help & Product Troubleshooting for LG 22" FLATRON LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

I can't get a signal between my PowerMac G5 and my LG W2061TQ monitor. Not sure I'm using the right cable? I've purchased a DIV-D cable and tried the VGA cable furnished with the monitor with an adapter but can't seem to get a signal.


Hello,\012First we need to know your G5 and monitor are working, independently. Test these items first on known good computers and monitors. If they show working then;If your G5 is per 1997 then it may be a true compatibility problem. If ... LG 22" FLATRON LCD Monitor

Nothing on the screen at startup


If you cant get into the setup menu then I would think the monitor is defective,you did not state if you hooked up the monitor to a computer that has a vga port that works. ... LG 22" FLATRON LCD Monitor

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

I've been trying to use s-video cable to connect


\012\012At the rear or side of the PC there should be either or both of a 15 Pin DIN Plug, HDMI socket. or a Yellow RCA or 4 -7 pin DIN. Now IF these are present then YES you can connect to a TV. Now some TV' ... Acer Aspire 3690-2196 Notebook

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Monitor no longer will switch to Analog (VGA) source.


Hey fellas,I just bought the 22" Gateway Monitor and am Having similar problems.Heres what I found out:Check the recommended cable input \\ outputs for your cards and monitor. I know this 22" says it needs a 24-Pin DVI- ... Computer Monitors

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

I am trying to hook my Eee 1000HE netbook up to my hdtv. I have 15 pin RGB cable but it doesn't work. Followed TV (Visio) directions, but it doesn't work.


More information would be helpful - what operating system are you \015\012running - XP or Linux? are you getting no signal at all? or just a \015\012picture and no sound? or vice versa?. What settings did you try?\015\012\015\012In the ... ASUS Eee PC 1000HE Netbook

I've got a Toshiba Satellite Pro L300 that I'm trying to connect to my very old TV (16 years). I'm going through the VCR. I thought I could connect the laptop's VGA to the RGB port on the VCR, tune to the right channel, adjust the display on the laptop & poof --- big screen monitor. Well, no such luck. Any help would be appreciated. Oh, it go directly to the TV, I would need to convert the PC's VGA to coaxial. I thought it would be easier going through the VCR's RGB.


No that will NOT work, first the PC's VGA doesn't have any "Channel" Second you must install Drivers for said VGA card, and the card MUST have a TV out connector either SVHS, or Composite, video out, or as of late HDMI. You Cannot "Receive" a VGA, si ... Toshiba Satellite L300-EZ1004V Notebook

Check signal cable


Hi,You're quite invested in this rig. Most of us PC guys on this board have a setup like yours and we all have our own business were we go onsite and solve problems like these.Your troubleshooting can be done with us but we ha ... Samsung Syncmaster 730B 17" Flat Panel LCD Monitor

Monitor falls asleep during/after startup


... HP Computer Monitors

DVI input on monitor not working


Contacted viewsonic about this issue- they suggested- have both dvi and vga hooked up to same machine. start with poweroff on both. power on monitor, then power on computer. when you see display coming from the vga, power off pc, then disconnect vga ... ViewSonic VX2025wm 20.1" LCD Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.


OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

Color dis-order and then flickering display


Try uninstalling and reinstalling the monitor drivers if any are applicable, run a direct X test on your hardware make sure your video card is OK. Try doing a wiggle test on the VGA cable that is plug ed into the back of your computer, that sends the ... AOC CT720G 17" CRT Monitor

I am trying to connect my acer PC to a tv but get


The inputs on a TV are normally via the ariel and go into a pre-amp \015\012\015\012To get a signal in you, would again, normally connect to the RGB or Video in which bypasses the pre-amp.\015\012\015\012The VGA cable will be ... Acer Aspire 5102WLMi Notebook

Monitor not receiving a signal


I have these monitors, didn't you get another cable in the pack which has a vga plug on the end? I have had trouble with those converters, try a DVI to VGA cable ... Gateway FPD2275W LCD Monitor

Screen goes off showing VGA with cable on the screen


This looks like a bad cable connection. Try using a new cable for the connection between the computer and monitor. If that does not work test you computer on another monitor to make sure you are getting signal output from the video card.Also check th ... Gateway GM5259E PC Desktop

I live in Seattle and have an Acer V193B that 'went dark' when I hot-pluggged the VGA connector into my laptop. I *assume* the problem is the chip that buffers the VGA lines is blown. (I know the cable and laptop VGA are not the problem.) The monitor has power (power button glows orange), there is just no video display. Is there any chance that I can get this repaired w/o spending more than the monitor is worth in shipping and repair costs?


First, to check the monitor.\015\012Disconnect the input signal from the computer.\015\012Turn off the monitor and unplug from the A/C source.\015\012Allow the monitor to set for a few mi ... Acer V193 B LCD Monitor

No input signal


Make sure that the correct cable is used vga to vga or dvi to dvi..... try some different cable.... try a monitor slf test you cannot access it by just removing the monitor cable..... if do get the test the monitor is bad ... Computer Monitors

NEC 2190UXP monitor problem cant replace with another monitor


... NEC Computer Monitors

My Gateway GT5685E powers up as does the monitor by I get no signal to the monitor (running Vista) - I have checked cables and the monitor seems to be fine, I have also tried to power up with the operating system CD but the same thing occurs. PLEASE TELL ME THIS ISN'T AS SERIOUS AS IT SEEMS dUANE


Well, there is good news and bad news...first, since it is a desktop and the video is integrated into the motherboard...if the integrated card fails, you can install a midlevel video card intot an empty PCI-E slot and have great graphics again for ar ... Gateway GT5685E Desktop Computer - Intel Core Duo E4600 Dual Core Processor, 4GB DDR2, 500GB HD, 18X...

Monitor Turns Black


This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

PF790 monitor picture issue


Was it dropped? If so, it could be a board crack or damage to the CRT.\015\012\015\012Was it stored in an unheated garage, shed, or attic, etc.?\015\012\015\012Damp air or widely changing temperatures can cause condensation on the circuit boards.\015 ... ViewSonic PF790 19" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2329 seconds