Having problems with your Lenovo IdeaPad Y510 - Intel Core 2 Duo 2.0GHz Notebook Laptops ?

Cannot get out of Configurating updates: stage 3 of 3 screen

\015 Hi, I just purchased a Lenovo y510 laptop. Everything looked OK when I ran it the first time, but when I had to reboot the system I now am stuck at the Configuring updates screen. I've tried every type of reboot with every type safe mode, but still it goes to the same screen and then reboots itself. Is there some way I can get into the operating system without using safe mode? I know if I can get in and install the drivers and disable the automatic updates I should be OK. Any ideas? Thanks.\015\012Tom\015

Answers :

This is all I could find:
\015\012
\015\012
\015\012It's not only Windows Vista Service Pack 1 that isn't ready for general consumer availability. Some of the updates released on February 12, 2008, as a part of the Microsoft monthly patch cycle, have managed to effectively kill Windows Vista. Users are reporting that, following the introduction of the February 12 updates, Vista gets stuck at the finalization of the deployment of the updates displaying the message "Configuring Updates Stage 3 of 3 0% completes" and then entering
\015\012\015\012\015\012\015\012\015\012\015\012an infinite reboot loop. And there is absolutely no way out for the end users, because canceling the configuration process of the updates is a move equivalent to losing access to the operating system entirely. This will even happen in Safe Mode.

Microsoft has yet to officially respond to the issue, or to provide a resolve or at least a workaround. However, it does seem at this point that there is an issue with the deployment of the pre-requisite updates necessary for the smooth installation of Windows Vista SP1. Namely, the problem resides in the Vista installation software. The fact of the matter is that end users will have to first update the Vista installation software and only then deploy the remaining February 12 updates and only at the end Vista SP1 RTM.

If you are stuck watching the "Configuring Updates Stage 3 of 3 0% complete Do not turn off Computer" and in the endless reboot loop, then stop the cycle and boot from the Vista media. You will need to "Repair your computer," so select your Vista installation and restore it to a point before the deployment of the updates. After gaining back access to your operating system, you will have to install the service stack update, namely Update for Windows Vista (KB937287). Deploy this update before any other on your Vista, and only then install the rest. At this point in time, you should experience no more problems.

"Update 937287 is a prerequisite package that contains updates to the Windows Vista installation software. The installation software is the component that handles the installation and the removal of software updates, language packs, optional Windows features, and service packs. Update 937287 is necessary to successfully install and to remove Windows Vista SP1 on all versions of Windows Vista," Microsoft revealed.
Repair Help & Product Troubleshooting for Lenovo IdeaPad Y510 - Intel Core 2 Duo 2.0GHz Notebook Laptops

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cannot get out of Configurating updates: stage 3 of 3 screen


This is all I could find:\015\012\015\012\015\012It's not only Windows ... Lenovo IdeaPad Y510 - Intel Core 2 Duo 2.0GHz Notebook Laptops

Hello there, when I turn on my laptop ( toshiba satellite P305D), it shows "configuring stage 3 of 3 - 0% complete do not turn off your computer". then it shuting down itself, and went back on showing the configuring page. it happen on and on non stop. any idea why and how to fix it? thank you.


The computer has gotten hung up on the latest Windows update. There may be a recovery here, but the problem with these updates especially if your have the computer to update automatically is that some of these are service pack updates, and a service ... Toshiba Satellite P305D-S8834 Notebook

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

My emachine is stuck cycling at start up


No computer is trash when you are dealing with a software issue.\015\012\015\012boot up and tap on the f8 key... when you get to that screen... choose safe mode... if it successfully boots.... go to start menu... and restart again... it s ... E-Machines T2742 PC Desktop

My new lenova thinkpad t400 seems to be caught in a loop. I've taken the battery out and ctrl alt delete but still goes back to configuring updates: stage 3 of 3 screen and then says shutting down, but it doesn't reboot and I can't turn it off. Thanks!


Hello!This is a tough one. I've seen this recently and had to just press and hold the power button to shut down. Not good!I'm assuming you're using Windows of some sort since it shows "Stage 3 of 3" when it does updates during shu ... Lenovo ThinkPad T400 - Intel Centrino 2 Core 2 Duo T9400 2.53GHz Notebook Laptops (276712U)

ACER Aspire 5100 powers down at will


When you turn the laptop on hit f8 until the menu comes up, try use the last good known configuration. If that does not work tap f8 goto safe mode and then to system restore and restore it to an earlier time. Let me know if it works. ... Acer Aspire 5100 Notebook

I have an acer aspire laptop, when i start it up its says configuring updates stage 3 of 3 0% complete then it will shut down come back on say the same again and shut down again. it will keep on doing this


Maybe you could try the last known good configuration. When the laptop is starting up, wait until the acer screen disappears and then tap F8 on the keyboard before the windows screen comes up. You should get a black screen with some options that say ... PC Desktops

I have a Acer Aspire One Model ZG5. An update to Bios was performed as recommended off Acer site and after install the Netbook shuts down after XP OS banner. I cannot restore using the Alt F10 method as the laptop shuts down before completion as well. How can I restore this device


I got myself a used cd/dvd drive from another laptop on Ebay for 15 bucks, then I found a slimline dvd enclosure that operates using the USB interface on Ebay for 18 bucks. Put the two together and you get a slimline external dvd drive that simply pl ... Acer Aspire One A150-1006 Notebook

My tecra 8000 fails to boot cannot find config sys


Originally Posted by Don\015\012\011\011\011\011\015\012this problem occurs when you try to update drivers in the computer..sometimes ... Toshiba PC Laptops

My HP Pavilion zt1130 PC Notebook Is Acting Up. When I Turn It On And It Reaches Windows Xp Loading, It Restart All Over Again And Again. I Can't Even Reach My Login Screen. Also I've Have Done Alot Of Updates On My Laptop So It Can Be Up To Date Using Windows Update. But It Seems Like That Doesn't Do Anything Because It Still Acts Very Slow. I Don't Have The Disc To Just Restore Everything To Default And I Have Tried Doing A System Restore But It Only Allows Me To Go Back a Couple Of Days From


You need an XP installation disc to boot from and allow you to get into the recovery console for a windows system boot file fix. If you know someone who has a Windows XP disc, you can borrow it, you are not re-installing, the tip below is just to fix ... HP Pavilion zt1130 Notebook

Can turn computer off and on and I will see the windows screen then the screen goes blue with a blinking cursor. I also have a dell.


It is related to bios enabled computrace models. It has happened twice to my dell 1525 I bought it 12/08. The software used to image your recovery partition is incompatible with the two tiny hidden partitions computrace uses. Computrace ... Dell Inspiron 1501 Notebook

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

I have a hp laptop with xp i updated it with microsoft update and the following day it started acting up. it is like the power switch his held in but sometimes it will run fine for a few minutes tried to reload windows but when it almost gets to where it asks for the partition it powers down. but, when it powers down it says windows is logging off most of the time


Windows Start-up Errors\015\012Step one, you need a Windows Installation CD. If you only have a recovery disk set like the ones from HP or Compaq they will not do what you need done. Under normal circumstances however, you ca ... HP Pavillion DV1133WM Notebook

Dell inspiration 1150 laptop


It is related to bios enabled computrace models. It has happened twice to my dell 1525 I bought it 12/08. The software used to image your recovery partition is incompatible with the two tiny hidden partitions computrace uses. Computrace ... Dell INSPIRON 6000 CENTRINO 1.7GHZ,512mb,40GB,DVDRW,XP (086216118098) PC Notebook

V2300cto intelpro wireless problem


Download hirens boot cd, this cd contains all the diagnosic and repair software on it you will ever need, test the HDD and see what it says about the drive ... HP Compaq Presario V2000 Notebook

I cannot logon to my PC


Start your PC in safe mode, to do this repeatedly tap the F8 key as soon as you turn the power on. This will then bring up an "options" screen listing boot in safe mode, safe mode with network support etc. Just use safe mode. If it goes directly to w ... Acer Aspire AM1610-U1201A PC Desktop

0251: System CMOS checksum bad-Whats this? ToshibaA105-S4254


You can go ahead and press F1. If it happens again the next time you boot up or it just goes back to that screen try pressing F2 and then exit with saving.\015\012\015\012This should solve your problems, If it doesnt you have something co ... Toshiba Satellite A100-S8111TD Notebook

Major DNS error


Solution #1\015\012Method 1: Configure Windows Firewall to enable HTTP traffic\015\012loadTOCNode(3, 'resolution');To configure Windows Firewall to enable HTTP traffic, follow these steps:\015\012\015\012\015\012\015\0121.\015\012 Click S ... PC Desktops

Cannot install windows vista ultimate 64 bit on my computer when I have xp installed. Can boot from the 32 bit version disk though but I want the 64 bit. Tried booting it from start-up by booting from CD drive first but still ignores it and boots from HD. I have a intel duo x86 chip 6400 and need to know how to install windows vista retail version on my PC


\015\012Start the computer and make sure that the current version of Windows has started. \015\012Insert the Windows Vista DVD into the DVD drive and then close the drive tray. Wait a moment for the Setup program ... PC Desktops

Aspire 5610 won't go past stage 3 configuration update


If you need to reformat the system, you can usually access Acer's built-in eRecovery by pressing Alt-F10 at the splash screen. Just bear in mind that restoring the system to factory specifications will erase the contents of your hard drive, so pleas ... Acer Aspire 5500 5570-2609 Laptop

Configuration update problems


If you can get to your restore system under system tools, do it and restore to an earlier date. Also what is your current operating system? How much memory and type processor do you have? e-mail me at ... Acer Aspire 4315-2490 Notebook

Hi when starting up the laptop a screen comes up saying 'configuring updates stage 3of3 - 0% complete Do not turn off your computer. then it seems to restart and the same happens again. ca you help????


Use your OS disk to access the Vista repair tools.Even for those without an OS disc, Vista has repair tools built in.To access them, boot the computer, but when you see the “Microsoft (C)” with the moving lines, hold the ... PC Desktops

Acer Aspire 5715Z/5315 will load Acer page then black/blue screen after Windows update


You have a corruption in youre recover partition.You need to reinstall os with xp cd or vista cd and delete recovery parttition and create one whole partition.Then go to acer website and retrieve drivers. Anyfurther assistance you can reach me at Eri ... Acer Aspire 5315 Notebook

Cannot reinstall Windows XP pro to my hard drive which had it alr


I have found 2 websites taht can help you somewhat:\015\0121) this is the one with the steps that can help you, ... E-Machines eMachines Desktop PC

Acer5920 stuck in configuring updates.


This is generally caused by bad blocks in the Master Boot Record(Table). The drive itself is probably not salvagable. You'll need a reputable reapir person to slave your drive to another system to get the data off.\015\012\015\012Good L ... Acer Aspire 5920-6727 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9368 seconds