Having problems with your Impression Products 9LSP (Black, Silver) 19 in. Flat Panel LCD Monitor ?

My Impression Model # B19BF flashes on and off in Analog mode (hooked up that way) when turned on. It comes on a second and goes off after 10 or 15 minutes when the computer goes to screen saver you can move the mouse and the thing comes on and works until it is turned off for 10 or 15 minutes. then the same process . All other monitors work good on it and this one will work indefinately if left on. It is like it takes time to warm up Ha! The unit is detecting input as the power light is on soli


Answers :

I know this is old but it is most likely the monitor power supply. Had this happen on this and others. The cost of the power supply might as well get a new monitor. Can't find the company and the only two company selling the power supply is not in stock.
I do computer work and electronics but have never worked on an LCD monitor, so I checked to see if you guys could lead me in the right direction. Since I got no response, except a request to sell me your premium plan, I tore into the thing myself. What I found was a leaking cap. on the power board that fed 2 ICs that controlled the back lighting. It was a 470uf cap at 25v. I took a cap out of an old powersupply from a mainfraim I had trashed because it was way out of date. I found one that was 270uf at 16v. I knew it wasn't exact but since it was the weekend and I live in the boonies I decided to try it anyway. BINGO!! Now it works perfect. I have since bought a cap., but never put it in. I may at some time if this thing fails but it has worked solid as a rock ever since I replace the cap.. By the way during my troubleshooting I also determined that the problem also somewhat effected by different temperatures. Thanks anyway but I don't pay for what I can do myself. If you need help contact me. I charge also.
Repair Help & Product Troubleshooting for Impression Products 9LSP (Black, Silver) 19 in. Flat Panel LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Impression Model # B19BF flashes on and off in Analog mode (hooked up that way) when turned on. It comes on a second and goes off after 10 or 15 minutes when the computer goes to screen saver you can move the mouse and the thing comes on and works until it is turned off for 10 or 15 minutes. then the same process . All other monitors work good on it and this one will work indefinately if left on. It is like it takes time to warm up Ha! The unit is detecting input as the power light is on soli


I know this is old but it is most likely the monitor power supply. Had this happen on this and others. The cost of the power supply might as well get a new monitor. Can't find the company and the only two company selling the power supply is not in st ... Impression Products 9LSP (Black, Silver) 19 in. Flat Panel LCD Monitor

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

Poweredge1300 no post


Good news, you can save the machine, although it may take a while. There are a few ways to do this. If you are lucky enough that the boot sector of your BIOS didn't get corrupt and your computer still posts and you can put in a floppy. Then all you ... Dell PowerEdge 1300 Server

First let me say that the monitor DOES work on other computers. Just not this one. So it isn't the monitor. My monitor light is green until I plug it into my computer. It then goes amber immediatly and stays amber. Even when the computer is unpluged. If I turn the monitor off, plug it in , then turn the computer on,then turn monitor on, it starts out as green then says opms going into off mode and the light turns amber. There is no monitor hook up from the mother board. It has to plug into a vid


Many people use a vacuum on their computers, and I always advise against it. A vacuum creates Static electricity. Static electricity, will silently fry out your delicate computer components. You may not see it or feel it.To prove the vacu ... Dell Dimension 8100 PC Desktop

Can't set up network w linksys modem


Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

Monitor turns off after 2secs power light on


Oct 23, 2009- This is how it went for me..I have a Samsung SYNCMASTER ... Samsung SyncMaster 914V 19" LCD Monitor

Laptop not powering - HP6710b 2.1GHz 15.4 160GB 5400 PC Notebook


Sir,TAKE OUT BATTERY, REMOVE MAINS SUPPLY, HOLD POWER BUTTON DOWN FOR 30SECS PUT POWER SUPPLY IN ONLY DO NOT PUT IN BATTERY TURN ON LAPTOP NOWPUT IN BATTERY\015\012AC power adapter\015\012How the AC adapter worksThe most commo ... HP6710b 2.1GHz 15.4 160GB 5400 PC Notebook

'my Sony sdmhs73 comes on for 1 sec, then goes to power save.


The caps (capacitors) in the powerboard are going out. This is a very common problem in all class and price ranges of modern lcd and plasma tv's/ monitor's. I don't know if this problem has been like this for awhile or it just started, but either way ... Sony SDM-HS73P 17" LCD Monitor

Monitor turns on then goes dark


Either the power supply board is failing and needs repair or a bad bulb in the screen is causing it.You would have to open it up to get a better idea.Here's some info:\015\012\015\012MAKE\015\012SURE ALL POWER is DISCONNECTED ... ViewSonic VX715 17" LCD Monitor

X2gen mw19u 19'' widescreen monitor going black


X2GEN - MW19U, same problem as described in the other posts. A week ago after a reboot it did not turn on. Pressed the power button, it turned off. Pressed it again after about a minute, all was fine until this morning. Same as before except t ... X2Gen MG19MY 19" LCD Monitor

Does not power up


It's a dreadful way to start a day - you press the power button on your computer and nothing happens. Do not fear because all may not be lost! Follow these simple steps to determine why your computer won't turn on. Note: It is very import ... IBM ThinkPad T22 2647 Notebook

Re: your suggestion for my Dell Lattitude D600 Hard Drive Problem


Ok, now we have some good discourse! While I'd always prefer to use a friend's laptop to test my fringe hypotheses, having your own is a fine option too. And it sounds like you have an enclosure too, so you are pretty much all set. It's r ... PC Laptops

For the past week, when my Sceptre LCD monitor goes to sleep after inactivity, it won't restart immediately. The blue LED blinks every second or so; eventually, the screen begins to flash the display, and then a few minutes after that, will finally turn on. Sometimes the whole process takes five minutes, sometimes an hour. How can I fix this problem? (I can't find the documentation to say exactly what model this is; if that's important, I can look again.)


Hello there Jake.\015\012\015\012Here's your geek-steer ...\015\012\015\012== CLARIFICATION ==\015\012\015\012When you say "sleep", are you certain it's sleep mode, as oppo ... Computer Monitors

Tv does not turn on


When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try first leaving the TV power cord unplugged for some times, let say one hour or so.\015\012 ... Zenith L13V36 13" Flat Panel LCD Monitor

Cant get it to turn on/ panasonic CF-51 toughbook laptop.


Here are some troubleshooting hints, see if these will work for you. It is hard to knnow what to do in these situations because there is no way of telling what key combinations etc. were hit.\015\012\015\012 ... Panasonic Toughbook CF-51 Notebook

Computer ranbdomly shuts down


Your last question was very observant. NO, without an O/S, there is nothing to make a anti-virus program run.I suggest the problem in the beginning, was that the laptop was overheating. Once the processor becomes too hot, (Processors have ... HP Pavilion dv4015CL PC Notebook

Black screen flashes after initial power up


This happened to me, and I fixed it, so read on! Switch on... green LED for a couple of seconds, Brief flash of light with display working, the total shutdown. Switch off, repeat but press the front panel power button as soon as the green LED comes ... Sony SDM-HS73P 17" LCD Monitor

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?


Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

Screen shrinks monentarily then zooms in untill screen is blank, then turns off.


OK PEOPLE I GOT THE SOLUTION TO THE MAG INNOVISION LT916S GOING BLACK AFTER ANY LENGTH OF TIME BEING ON!!! I JUST REPAIRED MINE TODAY! THE PROBLEM IS THE CAPACITOR BANK IN THE POWER SUPPLY PART THERE ARE 6 CAPACITORS I HAD A FEW LEAKY ONES "NOT GOOD" ... LG Flatron 915FT 19" CRT Monitor

Monitor image comes up, then blacks out, power still on


Hello David,This is very common problem and is heat/age related, but It can happen to monitors that are no more than a year old. It is usually bad capacitors on on power inverter board. I just fixed two monitors with this problem. This pr ... Rosewill MNTR |LCD 19' 8MS DVI R912E Monitor

Zenith L13V36 When I turn-on the power button to my 13" television, the screen goes on for about 1/2 second with no sound or picture (it's just black, but you can see the channel number in the upper right hand corner), then it automatically shuts off. What to do? Thanks so much for any assistance.


That sounds like a bad power adapter, a bad inverter , or a bad controller board.When TV does not start, and sometimes you hear a clicking noise, that means that the TV is on protect mode.\015\012\015\012\015\012\015\012Try fi ... Zenith L13V36 13" Flat Panel LCD Monitor

Fujitsu c series labtop screen goes blank, the hooked up to a monitor, starts to work then says out of frequence and goes blank


The video resolution and/or frequency that's set in windows is not supported by the monitor you have plugged in. Restart the PC in VGA mode (hit F8 after the BIOS messages but before any Windows messages) and change the video settings to something ba ... Fujitsu LifeBook C6555 Notebook

I have power out of adapter but laptop is completely dead; no lights come on at all.


Laptop is dead. How to troubleshoot the problem.\015\012In this post I’ll explain h ... Toshiba Satellite A45-S150 Notebook

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

I have the same problem!


Hi Robert,\015\012\015\012The monitor is on protect mode because an internal fault had been detected.\015\012\015\012To start unplug monitor from power and from computer and test computer with different monitor to find out if it is ... Microtek C893 18.1" Flat Panel LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2664 seconds