Having problems with your IBM E74 17" CRT Monitor ?

Attention out of range is displayed on ibm 2 74 monitor

\015 I changed my display setting and i am geting message as monitor out of range. i pressed tab key during boot and got option as stand alone mode. i booted system in thaqt mode and no display. how can i fix thisn problem.\015

Answers :

To resolve this behavior, either change the refresh rate, or change the video adapter settings.

\015\012To change the refresh rate:
\015\012
    \015\012
  1. Restart\015\012the computer, and while it is restarting, press F8 until the Startup\015\012menu appears. Press 3, and then press ENTER to start the computer in\015\012Safe mode.
  2. \015\012
  3. Right-click the desktop, click Properties, and then click Settings.
  4. \015\012
  5. Click Advanced, click Adapter, and then click Adapter Default from the Refresh Rate list.
  6. \015\012
  7. Click OK, click OK again, and then click Yes to restart the computer in Normal mode.
\015\012\015\012You can set the colors and screen area to your preferences under Display Properties.\015\012


\015\012\015\012To change the video adapter settings:
\015\012
    \015\012
  1. Restart\015\012the computer, and while it is restarting, press F8 until the Startup\015\012menu appears. Press 3, and then press ENTER to start the computer in\015\012Safe mode.
  2. \015\012
  3. Right-click the desktop, click Properties, and then click Settings.
  4. \015\012
  5. Click Advanced, click Adapter, and then click Change.
  6. \015\012
  7. Click Next, and then click Display a list of all the drivers in a specific location, so you can select the driver you want.
  8. \015\012
  9. Click Next, click Show all hardware, and then click Standard display types under Manufacturers.
  10. \015\012
  11. Click Standard Display Adapter (VGA), and then click Next.
  12. \015\012
  13. Click Yes, click Next, click Finish, and then click Yes to restart the computer.
  14. \015\012
  15. After the computer starts, right-click the desktop, click Properties, and then click Settings.
  16. \015\012
  17. Click 256 colors, click Apply, and then restart the computer.
  18. \015\012
  19. After the computer starts, click Start, point to Settings, click Control Panel, and then double-click System.
  20. \015\012
  21. Click Device Manager, click View devices by type, and then click Display adapters.
  22. \015\012
  23. Click Standard Display Adapter (VGA), click Remove, and then click OK.
  24. \015\012
  25. Install all updated monitor drivers.
Repair Help & Product Troubleshooting for IBM E74 17" CRT Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Attention out of range is displayed on ibm 2 74 monitor


To resolve this behavior, either change the refresh rate, or change the video adapter settings.\015\012To change the refresh rate:\015\012\015\012Restart\015\012the computer, and while it is restarting, press F8 ... IBM E74 17" CRT Monitor

IBM T43 laptop display


This is an example of an inverter going out slowly. Usually, they tend to just go out and you diagnosed correctly when you seen the faintness on the screen and tested with another monitor.\015\012\015\012The Dell inverter will not fit, mo ... IBM ThinkPad T43 Notebook

Inout signal out of range Answer Failed: retry


It shows out of range because the PC is sending out the video signal that is higher than the monitor can display, you need to set the PC video resolution to the native resolution: 1024 x 768 @60Hz. You can reboot the PC into save mode (hitting F8 key ... IBM ThinkVision L151 15" LCD Monitor

Attention out of range monitor H:95.1KHZ V:59.8HZ


You can solve this by choosing "Last known good configuration that worked" instead of going into safe mode. This will take your old display settings that worked. ... PC Laptops

Signal out of range?


Using your CRT, open the properties of the video adapter. Look for the refresh rate and set it to 60Hz. This should fix your problem.\015\012\015\012Hope this helps, and please rate my advice, good OR bad.\015\012\015\012Tha ... Balance CM2017 17" Monitor

PCV-RS720G Sony Vaio : BFG 5500 installed and wont display


Hi thereBoot up in safe mode, F8 on start up, if it lets you into windows, go to the device manager and uninstall the graphics drivers, then reboot the pc, let the PC detect the new card and try install the drivers, have your driver CD in the C ... Sony VAIO PCV-RS720G (027242658103) PC Desktop

Using windows media XP warning comes up on screen-NO INPUT. Why?


I have an ACER LCD TV/Monitor. When I connect it to y IBM Notebook, There is no display error message is "Out of Range". When I preview screen saver, it sometimes it will show a display. ... Computer Monitors

I am not able to get display on projectar as well as in external monitor from IBM r52 model thinkpad


You must tell your laptop to use an external display.\015\012\015\012Most laptops use the FN+F5 or FN+F6 option.\015\012\015\012You can also use the graphics utility on your laptop if it came with one as the compaq and a ... IBM PC Laptops

Monitor displaying out of range message - Hansol Computer Monitors


Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors

I have 2 ibm thinkpads t40, on one of the systems the lcd inverter and screen get no power but when i take the lcd and connect it to the 2nd ibm tkpad it works fine, What would be wrong with the one lap top that the inverter wouldnt get power when the colling fan harddrive? again on one system base both lcds work fine, when i connect them to the seconf base the base turns on harddrive works and fan spins but no power to inverter board. how can i fix this


On the second Thinkpad laptop, that doesn't show a display with an LCD screen. Plug a VGA monitor into the VGA port on the back of the laptop. Hold the Fn key down, tap once on the F7 key (Toggle your display over to an external monitor) ... IBM ThinkPad T40 2373 Notebook

Trubleshoot Motherboard what is mother board prob and how can find n fix them....


More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

IBM T60 can not connect to projector. I have some


Most notebooks have a keystroke that enables the external video port for presentations.According to the manual for the T60, your Fn +F7 key combination does the following:"Apply a presentation scheme directly, with no need to ... IBM ThinkPad T60 Notebook

Screen says out of range


I would say that the computer is trying to use a display resolution that the monitor is incapable of displaying. You may have to lower the resolution from the PC before you get a picture. Make sure you install the correct drivers for the monitor onto ... AOpen F2705 17" LCD Monitor

Monitor out of range when a game is booted up


The maximum resolution for the MV540 is 1024X768 @60Hz refresh. The other monitor isn't giving you an error message because not all monitors have that feature, but both the monitors are unable to display whatever data the computer is sending. If the ... Compaq MV 540 15" CRT Monitor

Over rang i have 15" proview crt when i start pc then display msg over rang for 9 sec. after this screen will be black.it can't open my bios screen.


On crt monitor adjust screen referesh mde to 75Hzor go to windows safe mod e\015\012You can see your monitor ranges ; \015\012right click desktop -> properties -> settings -> monitor \015\012You'll see Scr ... Proview PT 15.1" LCD Monitor

My monitor is linked to an Apple minimac. The monitor says out of range and gives a V: frequency 9 8kHZ anf H. frequency 1 19 HZ what does this mean and how do I reset it?


The message that appeared in your monitor "out of range" and V: frequency 9 8kHZ anf H. frequency 1 19 HZ has something to do with the screen resolution. Meaning that the resolution set on the computer did not meet the required resolution of the moni ... Computer Monitors

At start up it displays a message "frequency out of range" please change the display mode to 1280 x 1024 with 60Hz, any idea why its doing this and how to solve this issue so i can log back on to wind


Ok you may do soluton #1 make monitor show windows start. then enter windows-->enter control panel --> display--> setting --> monitor -->\015\012choose the refrash frequency to lower stage (at least 60 Hz)\015\012until no m ... Princeton Digital VL1919 19" Monitor

Monitor Problem We Have the Princeton VL 173 Monitor and when we hooked it up to the computer the Monitor Turns on and trys to Load Windows XP and then The Message Appears that It is OUT OF Range and these Numbers Appears H 53.8 KHZ and V 85.2HZ and then Monitor goes into Sleep Mode.


That is because your computer is trying to display a picture at a higher resolution than the monitor can handle\015\012\015\012EG. if your monitor was only capable of lets say 800 x 600 and you deci ... Princeton Digital VL1916 19" LCD Monitor

IBM Thinkpad 2652 has horizontal and vertical gridlines on screen


... PC Laptops

SOYO DYLM24E6 DISPLAYS OUT OF RANGE WAS TOLD MONITOR HAS A RESET BUTTON IF SO WHERE OR IS THERE A FIX FOR THIS MONITOR IT IS NEW


Restart your computer in Safe Mode\015\012(or reconnect your previous monitor).\015\012\015\012Set the screen-resolution to 800 by 600 at 60 Hertz.\015\012Shutdown, connect the new monitor, and restart, and your Soyo monitor w ... Soyo DYLM24D6 LCD Monitor

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Screen says "OUT OF RANGE H:27.8K V: 62.0 - Hyundai ImageQuest QV770 17 in.CRT Conventional Monitor


That's the monitor telling you it's getting a signal it can't handle. The H and V values are the horizontal and vertical frequencies that control the display. They change depending on your computer's video card settings. The monitor can be damaged if ... Hyundai ImageQuest QV770 17 in.CRT Conventional Monitor

"Out of Range" Message


This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to crank it up to 1600x120 ... Compaq Presario V400 14" CRT Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5000 seconds