Having problems with your HP w2207 Monitor ?

Monitor new monitor says no input

Answers :

Hi there
if your monitor came with a cd rom use it if not you need to be sure that the monuitor is compatable with the pc also check the pins at the end of the monitor cable to be sure that they are not bent. also you can make sure that the monitor is working by trying to attach it to a nother computer and see what happens please keep me posted on this there is still a few things we can try to do ok
best regards mike
Repair Help & Product Troubleshooting for HP w2207 Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Sony Monitor says "No Input Signal, switch to Power Save"

Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

'input not supported'

All I can say is WOW! I have been using my pc with my monitor for months and I was installing a new printer and must have wiggled something loose, and all I was getting out of my monitor was "INPUT NOT SUPPORTED." So I came to this forum, and low a ... Acer AL1916W 19" LCD Monitor

Graphics card stopped working in pci-express slot, monitor says "no input signal", plugged monitor into onboard graphics vga and runs ok. brought new card and fitted in pci-express slot but monitor still says "no input signal" pc is hp pavilion slimline s3040.uk, onboard graphics chipset isnvidia GeForce 6150le, new card is nvidia GeForce 8400gs. I have replaced dvi/vga adaptor and checked pci-e is selected in startup. any ideas?

... PC Desktops

Osd lock in my LCD

Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)

Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Fujitsu-Siemens P15 TFT power/picture problem. it take time to turn on.

It does indeed sounds like the capacitors, I had this problem last year with a Medion monitor where it would turn on and off, when I spoke to Medion they did say that it would need a repair but at the time I wasn't enclined to pay the repair fees for ... Fujitsu Siemens Premium Line P15-1 15" LCD Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....

More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

I have just set up new desktop Acer. Error message: No input signal.

Check the website for drivers. But it seems to me that there is another problem most computer boot up no matter what screen is hook up. have you tried any other monitors ? If you have and the work im not sure what your issue is but i would say that ... Acer Aspire™ T180 PC Desktop

No DVi input, then computer goes to sleep

I have a new HP pavilion slimline with Vista......a 19 inch flatscreen monitor......I went nuts with it not connecting and saying no DVI input......\015\012\015\012I tried something and so far it has worked 10 times in a row...\015 ... HP 22" Widescreen Flat Panel TFT LCD HD Monitor

New video card wont work, acer monitor no signal

Ok the IGFX is the on motherboard video you will need to set the cmos to clear the setting you did or move the video cable to the motherboard output.after you have used the bios to switch back to the AGP you can start widows in safe mode to acc ... Acer X193W LCD Monitor

Have a laptop with Windows XP home edition. It is hooked up to a brand new LCD through a RGB cord and audio wire, the LCD won't recognize it and the Gateway can't input the LCP to act as a second monitor to play DVDs. I think there is a setting or something that I need to adjust.

I would test that lcd in another computer and or laptop or Television that has the same RGB / VGA wire connection and then you can see if from there if its the LCD thats bad or maybe your graphics card that might be bad on your computer. When you say ... Gateway PC Desktops

My monitor when powered up gives me a no input signal for VGA and DVI and then goes into sleep mode after 15 seconds. I plugged in a second monitor and have a no signal message too. Should i replace the video card or has the monitor locked itself out. Please advise....Best Regards Beth.

Hey BethSounds like you are in a bit of trouble!Based on what you've told me, it looks like it might be a video card fault. However, a few things to check first are..Make sure the VGA & DVI are secured tightly ... HP f2105 21" LCD Monitor

DVI-D cable not working with Westinghouse L1975NW...

If the monitor has two video inputs - a DVI-D and a DSub VGA then the monitor needs to be switched to the DVI-D video input. ... Westinghouse L1975NW Monitor

I have purchased a new Acer computer and Acer monitor, however when I turn them on they come up with the message 'no channel'. I have tried pairing up my old monitor with new computer and vice versa. On my old monitor the message comes up saying 'no video input'. I can not see where I may have made an error with leads - I'm pretty sure I haven't. Any suggestions?

Have u tried to see if the video card is inserted all of the way and chech to see if all of the pins on the end of the monitor cable are all straight and not bent and 1 more thing did u have to put anything into the computer when you got it ... Acer PC Desktops

How to change input timing without a monitor

You will not able to do it without a monitor. you'll need to get another montior in order to change the settings on computer. you need to change the resolution on that computer. sounds like the resolution is either too big or too small that it will ... Computer Monitors

Moved my al1716 to my computer in the bedroom. Nothin' !

What this monitor is trying to tell you is that your resolution is set to a higher degree than this monitor can support. Turn your computer off, restart then go to safe mode by tapping the F8 key or by holding down the left shift key whi ... Acer AL1716 17" LCD Monitor

Acer monitor AL1916W

Start up windows in safe mode and see if you still get the problem. did you use the same vga cable??? ... Gateway FPD2275W LCD Monitor

My monitor says " monitor is going to sleep" whenever i switch on. Please tell me how to fix and also prevent it from happening again. Thank you. Have a nice day.

Normaly is computer vga resolution out of range for LCD monitor, or some problem at vga card/cable, in some pins or LCD input board defective.\015\012\015\012 1st lower vga resolution to 800x600 50/60Hz\015\012 2nd change Vga cable ... HP w1907 LCD Monitor

Dell pc not working

IBM laptop t30problem with battery not charging ,,,It shows that is charging but it doesn't\\\\even bought a new battery and it still won't charge. ... Compaq Presario Notebook

Hanspree monitor says,''No signal input check video cable''

Ask the shop for a replacement cable. it could be broken. ... Computer Monitors

Help with laptop

Hello Milligan, Your problem is the inverter board in the display. Thats the reason why its working with an external display. The external display input is from the video card not from your display. You can get an inverter board for arou ... Toshiba Satellite A100-S8111TD Notebook

EMachine T6522 monitor says "no signal input" when turned on. tower switch light on and motor seems to be running. Nothing but above message on monitor. Checked both ends of cable and unplugged tower and plugged back in.

This could be an issue of a video card gone bad. I have experienced the same issue firsthand. This could also mean that no RAM is installed. If you have been using this computer previously, the second option is probably not even an option.\0 ... eMachines PC Desktops

NO signal input, for NO reason!

Check the linked conversations here and ... Computer Monitors

My new 21' flatscreen monitor keeps shutting off :(

Usually when an LCD display shuts off on it's own this can be a power supply issue. I would say if you checked all the connections you may want to contact the manufacturer. If it is only a few months old then you should be able to get it replaced und ... HP Pavilion F1703 17" LCD Monitor

Input not supported

Did the monitor ever work properly with the computer?\015\012If it did , and it no longer does mabe something that you changed caused the problem.\015\012Try system restore to a previous date when the monitor was working, if it ever did. ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7200 seconds