Having problems with your HP W2007 LCD Monitor ?

Resolution issue? I have a Toshiba laptop and HPw2007 monitor - they once worked beautifully together. Now the monitor does not recognize the resolution settings, so there's a 1" blacked out area on the right.


Answers :

Try using the Toshiba graphics control settings instead of Windows graphics control settings to adjust the resolution.

If a cd came with the HP monitor check it for a help file and possibly drivers that optomize its settings.
Repair Help & Product Troubleshooting for HP W2007 LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Having the same problem as others, my 912n monitor is a black


The problem seems to be that the computer, do not recognize “which monitor’s connected?” Follow these steps to correct the problem: Shutdown the monitor, next shutdown th ... Samsung SyncMaster 912N 19" Flat Panel LCD Monitor

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

If we close the screen a little bit it goes bright white. Have to switch off and restart. Also, after doing a power point presentation the display is only opening about 80% of full screen with a black strip down the right hand side and 1/2 inch grey at the bottom. How do we display the screen to be 100%? Thanks


Installing the correct drivers for the GFX card and setting the correct NATIVE RESOLUTION should fix that issue...\015\012\015\012\015\012\015\012Try playing around with other resolutions (right-click empty area of\015\012Desktop->Properties ... ASUS PC Desktops

HP W1907 Monitor goes black after resolution change


Hi and welcome to FixYa,A couple of ideas you can explore/try:\015\012\015\012temporarily replace the HP W1907 with another monitor. The purpose is to determine if it is a monitor issue or vi ... HP w1907 LCD Monitor

My HP monitor (f50) has malfunctioned


Try these 2 steps if they don't work get back to me :)Step 1. Connect the video cable and turn on the computer. What happens?\015\012 \015\012\015\012 \015\012\015\012 ... HP Pavilion F50 17" Flat Panel LCD Monitor

Text/picture shadow Recently I've noticed what appears to be a shadow appearing mostly with text but in some picture as well. It makes the screen look a little blurry. It's not bad but just enough to irritate me. Any suggestions?


Hi rustybob,I have a solution for ya, but there are a couple of variables that could be involved. I assume it's an LCD monitor? How many inches is the viewing area, and what model is it? When you look at an LCD monitor, you pay attention ... Gateway FPD2275W LCD Monitor

Outof Range error message & black screen


To resolve this behavior, either change the refresh rate which is what is chnaged or the resolution or change the video adapter settings.\015\012 \015\012\015\012To change the refresh rate:\015\012\015\012 ... HP L1940 19" LCD Monitor

I changed Desktop resolution setting to higher, Monitor went black with "Out of Range" message


Please try this:\015\012To resolve this behavior, either change the refresh rate, or change the video adapter settings.To change the refresh rate:1. Restart the computer, and while it is restarting, press F8 until the St ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

I have a Compaq Presario 5420 computer and bought


You'll have to update your drivers for your video card by going to the Mfg. website and seeing if they have any later drivers than you're currently using. In my case, the 1440x900 monitor was recognized when I downloaded later updates, though upon i ... Compaq Presario 5000 PC Desktop

Screen shows different colour grids when starting then goes black with message in right corner "out of range"


Hello ssi1,This happens when your screen resolution is set to something higher\015\012than what your monitor can display. For example, if your monitor\015\012supports resolutions of up to 1024x768 and your video card allows you\015\012to ... PC Desktops

Acer Model AL1916W A reads no signal after being on for 1 hr


The problem seems to be that the computer, do not recognize “which monitor’s connected?” Follow these steps to correct the problem: Shutdown the monitor, next shutdown th ... Acer AL1916W 19" LCD Monitor

Are Dell monitors not compatible with older HP Pavilion Computer? I tried to connect my HP CPU to a Dell monitor and it will not recognize it at all.


It shouldn't make any difference which monitor you are connecting to any computer. In fact, I am running a 19" HP Flat Panel on my Dell Dimension 2400 right now. It is NOT a wide screen monitor as the Dell built in graphics card will not support th ... Dell PC Desktops

Screen turns black and blue LED is blinking


Sounds like the monitor is being made to show a resolution it does not support. Check the available resolutions the monitor supports and then check what resolution the video card is giving, if it not compatable, you get the black and blue screens. ... LG Studioworks 563N 15" CRT Monitor

On my laptop the screen picture has gotten smaller and the outside of it is black. i dont know what the problem is. it is an old laptop and i dont no whether its from age.


Its not actually a problem or a fault, its just a setting that has been changed in the video card settings.There are two ways to fix it.One of them is to adjust the resolution, right click on your desktop and select properties ... Compaq Evo N610C Notebook

I cannt find driver for monitor LG L1953S - LG L1953S - flat panel display - TFT - 19" (Black, Silver) LCD Monitor


Actually, you should be able to use the monitor without installing a driver. If it isn't recognized automatically, just set the resolution to 1280*1024 pixel and set the screen refresh rate to 60Hz:In Windows XP right-click on the desktop, open ... LG L1953S - flat panel display - TFT - 19" (Black, Silver) LCD Monitor

Black Bars each side of my new monitor wide screen


Right Click on an open spot on your desktop.\015\012\015\012If your Operating System is Windows XP, choose Properties from the menu box that pops up when you right click.\015\012\015\012A new window will open up. Click the Se ... HP W2007 LCD Monitor

I have a Gateway mx3422 notebook. I cannot get the display to clone when I hook it up to a projector. The notebook screen goes black and the display shows on the projection screen.


So, as soon as you hook up the projector, the LCD goes blank? 2 things control the output, the function key to enable the external video and the display settings in Windows. If Windows shows 2 displays (Control Panel, Display, Settings), then chang ... PC Desktops

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

Resolution issue? I have a Toshiba laptop and HPw2007 monitor - they once worked beautifully together. Now the monitor does not recognize the resolution settings, so there's a 1" blacked out area on the right.


Try using the Toshiba graphics control settings instead of Windows graphics control settings to adjust the resolution.If a cd came with the HP monitor check it for a help file and possibly drivers that optomize its settings. ... HP W2007 LCD Monitor

Using Ezdock and GridVista with my Acer Ferrari 1004


Just wondering if you have loaded drivers for the F20, There may be a conflict with that monitor until you install the proper software. Another thing is to go into your display setting and make sure that the correct display device is selected. You ca ... Compaq Presario X1000 Notebook

Viewsonic VA712b 17 " flat screen monitor


Realheadache, \015\012\015\012Unusual problem, it could be the resolution and refresh rate setting your PCs video card is currently set at. I don?t know if this will fix your problem but its worth a try:\015\012\015\012- Now go to your PC with the ol ... ViewSonic VA712B 17" Flat Panel LCD Monitor

How to I improve the contrast. Black text tends to be too grey; and the light blue text tends to be too 'white'. I am straining my eyes, often, especially when I use Picasa in Google. I have either lost, or didn't get, the mauual for M1901D, and need to know how to operate the buttons on the front of the screen.


Change the “Contrast, on the Monitor:” ... Computer Monitors

Black screen I have an HP Pavilion dv9700t notebook bought last July. Recently the screen started staying black any time I closed the lid and opened it. After a couple days of this constantly happening the screen started to occasionally break up into four sections when it wasn't black. It still works fine in safe mode. Usually the only way to get the screen to not be black is leave the computer shut during startup until the login screen appears, but after logging in it does the break up thin


If the screen is breaking up into multiple screens, the video resolution isn't set correctly. Change the video properties back to the native resolution.Right-click on an empty area of your desktop screen. Click on Properties at the bottom ... HP Pavilion dv9700t Notebook PC

Monitor displaying out of range message - Hansol Computer Monitors


Hello and Welcome to FixYa!This usually happens when you select a resolution or a refresh rate that is beyond the monitor range. For example if your monitor supports a max. resolution of 1024x768 then if you give it a signal of 1600x1200 ... Hansol Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.9851 seconds