Having problems with your HP w1907 LCD Monitor ?

When I plug my monitor into my video card i get "no input signal" yet if i plug it into the onboard slot it works.could my PCI-E slot be bad?

Answers :

There are two types ov problem
\015\0121,your desktop is agp but you insert pci express card
\015\0122,you didn't install a vga driver. GOT IT dude so out these things ok good luck........
Did you add a video card? If you have an AGP slot, it is best to put the video card in it. If so you need to go into the Device manager. Remove, disable or uninstall the onboard VGA driver. Go ahead and remove the PCI video card driver as well. Power down PC. Make sure monitor is hooked up to the Video Card, not onboard VGA. Power on PC. When Windows loads, it should detect the VGA card first, but if it detects the onboard first, ignore and don't setup onboard first. When Windows detects the card, load the necessary drivers when prompted. There is no need to reinstall the onboard driver for the video unless you wish to hook up two monitors.
Repair Help & Product Troubleshooting for HP w1907 LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Add on PCI-E video card doesn't work

I would check the BIOS To check the boot order preference to see if you can tell the motherboard to Force Starting up with the PCI-E Slot. \015\012\015\012If the slot did go bad, most likely you would see the system crash instead of just ... Gateway GT5028 PC Desktop

When I plug my monitor into my video card i get "no input signal" yet if i plug it into the onboard slot it works.could my PCI-E slot be bad?

There are two types ov problem\015\0121,your desktop is agp but you insert pci express card\015\0122,you didn't install a vga driver. GOT IT dude so out these things ok good luck........ ... HP w1907 LCD Monitor

Monitor stays bright white.

The first thing you always investigate is what changed when the behavior began showing symptoms. Maybe something was jostled or moved or the humidity was particularly high or something but that should give you some indicators. If nothing comes to m ... Dell E193FP 19" LCD Monitor

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?

Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

When i turn on my computer all it tells me is sva no signal input please check video signal

No Signal. No signal coming from the computer.The monitor is working, but there isn't any video signal coming from the computer.1.Could be a bad video cable. The one from the monitor to the computer. Do you have another ... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Graphics card stopped working in pci-express slot, monitor says "no input signal", plugged monitor into onboard graphics vga and runs ok. brought new card and fitted in pci-express slot but monitor still says "no input signal" pc is hp pavilion slimline s3040.uk, onboard graphics chipset isnvidia GeForce 6150le, new card is nvidia GeForce 8400gs. I have replaced dvi/vga adaptor and checked pci-e is selected in startup. any ideas?

... PC Desktops

-computer has gone blank

This could be anything from the monitor to bad ram or other items...i.e. software. I can't tell you what to replace but I can tell you what to check....in probable logical sequence. First, check your connections....meaning unplug and plug in again. ... Rosewill R900J 19" Flat Panel LCD Monitor

ASAP! Power Problems. Please Help!

There could be several things causing this issue. The power surge could have damaged the main board, power supply, graphics card or on board graphics, cd-rom drive ect. The problem is that one of these things could be bad and you need to figure out w ... HP Compaq Presario SR1420nx (SR1420NXPS69AA) PC Desktop

Can't set up network w linksys modem

Video card:Your computer has an integrated video card but has a "PCI Express" expansion slot for an upgrade. After the upgrade you will be able to play most games without the choppy frame rate...depending on what card you buy. Since ... PC Desktops

E-machine t6212 won't boot. I actually have two e-machines that are not sending a signal to the monitor. One is a t6212. It is booting up because I can shut it down using the windows key + up arrow + enter + right arrow + enter. I suspect the video card. I have an older PCI video card that is incompatible with xp. If I put that in the PCI slot will the bios send the video there? The other is a W3107. The hard drives spin, but the green light on the front stops flickering after a few sec

If you get only one BEEP at boot then the computer is working..\015\012\015\012Do you have a 2nd monitor to test with?\015\012\015\012if it BEEPS more then once...\015\012 pull out your mem chips and test,,\015\012 ... E-Machines T6212 PC Desktop

EMachine W3107 will not boot, no display.

Have you tried a different Graphics Card, looks to me like the onboard graphics card is at fault, there should be an AGP slot or PCI slot that you can plug a new Graphics card into then you should be fine... ... PC Desktops

No connection from cpu to screen.

By working fine, I assume you mean the monitor goes into its test/diagnostic displays. If that is the case, most likely your roommate has hit upon more or less the correct deduction. Two possibilites should be attempted before assuming to much ... Compaq Presario 7594 PC Desktop

My Gateway GT5685E powers up as does the monitor by I get no signal to the monitor (running Vista) - I have checked cables and the monitor seems to be fine, I have also tried to power up with the operating system CD but the same thing occurs. PLEASE TELL ME THIS ISN'T AS SERIOUS AS IT SEEMS dUANE

Well, there is good news and bad news...first, since it is a desktop and the video is integrated into the motherboard...if the integrated card fails, you can install a midlevel video card intot an empty PCI-E slot and have great graphics again for ar ... Gateway GT5685E Desktop Computer - Intel Core Duo E4600 Dual Core Processor, 4GB DDR2, 500GB HD, 18X...

No video out to monitor from desktop.

Sure not hard at all. if the monitor is connected to the default onboard video adapter, this is usually one of the first things to malfunction on a new computer. if the monitor works when connected to another machine, but when connected to the deskto ... HP Pavilion a1120n (PX759AA) PC Desktop

I have bad quality image, distorted

Hello and thank you for using FixYa\015\012Top 3 things that could be causing the problem.\015\012\015\012\015\012The monitor itself is bad\015\012The video cable is bad\015\012Your vid ... PC Desktops

Onboard VGA port disabled, in Vista

You should try to disable it in the hardware list. \015\012\015\012E-machines have an odd bios where not all the functions of the motherboard are available to the user.\015\012\015\012If you can find the make and model of your ... eMachines EL1210-11 PC Desktop

Display Problems I have tried to install a new PCI video card and cannot get it to work. The card is an Nvidia GeForce FX 5200 with 256mb of Ram. I have tried all 3 PCI slots, but the screen remains blank, though the PC appears to start up as normal. I have both uninstalled and disabled the onboard Intel graphics, but unless I plug the monitor back into the onboard serial connector - the display remains blank. I am running the original CRT Dell Monitor. Does anyone have a solution or is my mothe

Enable your onboard graphics and plug your monitor into the onboard. start up your pc and install any needed drivers for the secondary graphics card. right click on your desktop and go to your display properties you should see a faded out screen that ... Dell Dimension 2350 PC Desktop

No Video Signal

If you can't use the onboard video and it does POST or the PCI-E video card does show anything, most likely the motherboard is toasted. Apparenty gateway uses real poor quality power supplie and motherboards.\015\012\015\012I have the sam ... Gateway GT5228 PC Desktop

¿que tarjeta grafica puedo poner ?

Solamente necesitas comprar una tarjeta de video AGP the mas o menos 256 MB the memoria. uesta alrededor de $60 en eBay.Galaxy GeForce es suficiente. que tenga VGA y DVI conecciones. ... PC Desktops

Sound not workimg - Packard Bell iMedia 6826 (P481000502) PC Desktop

Hello jflow4u,\015\012Your problem could be several things. First thing I would check is the Bios setting for the o board sound system. You may fins several settings to choose from depending on weather you are using 2 speakers or 3 or more sp ... Packard Bell iMedia 6826 (P481000502) PC Desktop

A pop up window appears and says no signal analog

This is most likely a pc hardware issue and not a problem with the monitor itself. 1. check cables and power switches.2. remove devices from power strip and then plug them back in one by one.3. try alternating memo ... ViewSonic VA721 17" LCD Monitor

Trubleshoot Motherboard what is mother board prob and how can find n fix them....

More than 70% of all computer problems are related to cabling and connections. Ensure all cables are connected and connected firmly. IDE and floppy ribbon cables and power cables can often go loose. Ensure microprocessor, memory modules, and adapters ... PC Desktops

I have a HP Proliant ML110 G3 server that will not produce a video display output. I'm plugged into the onboard graghics slot. There are two slots for add on graghics cards, 1 - PCI-E x4 and 1 - PCI-E x16, but I currently do not have these cards to try. The power light comes on the tape drive and cd drive run though the boot sequence but no video display. Any thoughts? Thanks Jeff

Hello,\015\012\015\012Do you have any other PCI cards connected to the server board? If so, make sure they are seated fully in the slot. If they are, try removing all of them and try your server again. A lot of time bad PCI or faulty seat ... HP ProLiant ML110 G3 Server


Hello, if you were told by an expert tha you need a video card, here what you need:\015\0121: You do not have a slot card type video card in your system( Dimension E521) your system has on board video, which you can not remove from the system b ... Dell Dimension E521 (D10E16) PC Desktop

Monitor powers down upin startup

You need a new video card. it is powering down becuase it is not reciving any signal from you computer. if you are useing onboard video (vga) get a pci video card if you are useing a pci card try puting it in a dfrent slot. ... Gateway 310S (2900621) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.8315 seconds