Having problems with your HP w1907 LCD Monitor ?

Monitor starts then goes off, no signal

\015 When I turn on the monitor it starts up, displays the icons etc. then displays, VGA Active, No Signal then screen goes black\015

Answers :

I would check the LCD against another monitor. It does not have to be a LCD, a regular monitor will do.
\015\012This will tell you 2 things, 1. The Video card is good or bad, 2. The Cable is sendinf a good signal.
\015\012If when you startup the monitor, you see a display and then after a few seconds it display's a no signal message, this is consistant with a Bad cable or cable ends. or Bad VGA card from computer.
\015\012Hope this helps. Good luck..
\015\012P.S. If you have move the PC, you may want to open the unit, and re-seat the Card. If the card is not making a solid connect on the board, it will display these syptoms.
Most probably the wire is lose otherwise display card gone bad.
Repair Help & Product Troubleshooting for HP w1907 LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as

CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

Monitor comes up shows "acer" then says no signal and goes black

The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

No Signal when desktop wants to load

This is exactly what is happening to my monitor but happens a bit faster. Once the drive starts then the monitor turns on and turns straight back off again. The monitor works on other people's computers (including the tech guy at the shop I bought i ... ViewSonic VA1916w LCD Monitor

Black screen, blinking power light, no signal

Its a software bug in the monitor. Mine has done this since new. There is a race condiction between the monitor starting and Windows Starting. If the monitor starts faster then it thinks that there is no DVI connection and it will then revert to V ... ViewSonic VX924 19" LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Dell E173FP Screen blinking red, green, blue, white

The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... Dell E173FP 17" LCD Monitor

Monitor starts then goes off, no signal

I would check the LCD against another monitor. It does not have to be a LCD, a regular monitor will do.\015\012This will tell you 2 things, 1. The Video card is good or bad, 2. The Cable is sendinf a good signal. \015\012If when you start ... HP w1907 LCD Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz

Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

NO SIGNAL What do I do?

These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Laptop to tv

\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?

Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops

Monitor goes to white at cpu shutdown

The problem is in the "soft switch" technology:\015\012On some of Sylvania's newer monitors they have incorporated what is called "soft switch" technology. This allows your ATX power supplied computer to turn your monitor on and off using it?s softwa ... Sylvania L181 18.1" Flat Panel LCD Monitor

My Computer I took the cable wire off and still it's doing the: VGA input; no input signal, after I keep turning it on and off I do finally get my computer to come on though. I didn't know how to take the back of it off though to try that. Please assist. Thank you.

OK. Thanks for the response. That message is telling us that the monitor is getting no signal from the computer. In your case, it sounds like it is working part of the time. So, here are the things that can cause the problem, starting with the mo ... HP Vs17 17" LCD Flat Panel Monitor

Monitor goes blurry, colours/pixels start shaking across screen

Do you have your screen saver enabled, i so turn it off and se if it still does it.\015\012\015\012Secondly boot your pc in safe mode(pressing F8) on boot up and select start windows in safe mode.\015\012\015\012See if the monitor still does it, if s ... BenQ FP71E 17" LCD Monitor

AcerAL1714 LCD Not Connecting With DELL Inspiron 15 Vista Laptop

There is a symbol of Two monitors on F3 Or F4 button 1. Press Fn key and hold it 2. by holding Fn key press F3 key Your monitor will start displaying ... Acer AL1714 17" LCD Monitor

The monitor starts up displaying no signal

This means that the monitor is not receiving a video signal from the computer. When it doesn't receive a signal, it goes to sleep. You should check to make sure that the video cable is tightly connected, and also, if you have another monitor around ... Hanns.G Corporation HW191D 19" LCD Monitor

I recently moved my computer into my new condo and have not been able to use it since. The problem seems to be with the monitor. I turn on the computer and the fan comes on but the monitor displays "no signal" and then goes dark but the light one the front still flashes indicating it is getting power. The last time I moved my computer from one room to another, the monitor suddenly couldn't/wouldn't display colors accruately - no red. Attempt to adjust the color by using the monitor's controls we

Lack of video signal is usually 1 of 3 things, Power supply (PSU), Video card or Motherboard (mobo).Situation #1: If you get a blank screen and no sounds or movement it either indicates that the power supply unit (PSU) has failed or somet ... E-Machines eMachines Desktop PC

No Input Signal

Dont Panic it is Nothing...\015\012Your Monitor is safe...\015\012If it say "no Input signal" - "Check VGA cable"\015\012\015\012it means that the Monitor is finding signals from the computer,and the cable is either not connec ... Chi Mei Corporation 221A Monitor

Dell Monitor comes on but no picture

The monitor isn't getting a signal from the computer, which is why the power indicator goes orange. There are two possibilities:1) The computer isn't operating correctly. It may not be starting up at all when you turn it on, and you have ... Sceptre X9G-NagaIV 19" LCD Monitor

No video signal

That does not sound likely. how old is your computer? if it is more than about 5-6 years, it may have a blown power supply(basically your computer is dead) this happened to my friend's computer while i was there and he blamed it on me, if you think y ... PC Desktops

Input Signal Out of Range

I have been having the same problem with my hpvs17 monitor when i start to use my web browser on linux distros. Now, for the next few days i am going to try my system on a regular crt monitor. if the monitor does not crash, than i will have to say th ... HP Vs17 17" LCD Flat Panel Monitor

Monitor goes into power saver mode

Take your Agp card with you to the shop. You do not need to go through Gateway, but there are serveal formats of AGP regarding the voltages.\015\012\015\012By the sounds of it you have the newer version of AGP so finding a replacement car ... Gateway 500 X PC Desktop

Montiors shut off

If the monitor goes into standbye when you plug it into the computer , it generally means there is NO signal coming from your video adaptor.\015\012Plug the old monitor in , if it works, ide suspect the new monitor(s) are not working correctly. ... Systemax Venture PC Desktop

Monitor goes to sleep when booting up

Boot into your BIOS usually del or the f2 key, check what your setting is for your video output, it is more than likely outputting the video through the onboard video and not to your video card. ... HP PC Desktops


The monitor is probably on protection.To start unplug monitor\015\012from power and from computer and test computer with different monitor\015\012to find out if it is monitor or computer fault.If it is computer fault and no vi ... Gateway FPD1975W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6698 seconds