Having problems with your HP w1907 LCD Monitor ?

Screen goes blank after a few seconds

\015 22in hi def monitor\015

Answers :

There is nothing u can do about this blank monitor, my hp and the one i bought for my grandson has same problem, i talked to hp help for a long time and we tried everthing and then I FOUND a very easy cure, when monitor goes blank click the windows button on keyboard and programs will open, you will see on the TASK BAR BLANK WINDOWS double click it away and it is usually good for the day, regards robert
Having the same problem. Hooked up another monitor with the same cable just fine, so it's not that or the vid card. Could be the power cord, but not sure how to check for that.
Repair Help & Product Troubleshooting for HP w1907 LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Computer dies on me (can't say it better due to no technical knowledge; pls read :-)


The 'click' sound you hear when your computer goes off is the hard drive head parking itself.  It does this whenever the machine shuts down to prevent damage.As for the problem itself, I believe your computer is overheating.  Th ... Acer TravelMate 290LCi Notebook

LCD monitor goes blank


It appears that the display resolution set in your display properties is out of the range that the LCD can display.Try this.Boot to the ENABLE VGA MODE by pressing F8 to get the Windows Boot Menu. If you can get to the deskto ... Gateway FPD2275W LCD Monitor

Blank HP w1907


If the power light does not turn color and stay's green on startup, it is not a power problem. It is most likely the inverter. If the unit is in warranty, send it out ASAP. Contact HP customer care by email and have the issue logged in.\015\012 ... HP w1907 LCD Monitor

Screen Goes Blank


Ive seen this on other monitors. Look for a 1 and 2. Some monitors do NOT auto detect a signal, and this one might not. Look for a way to set the monitor from Digital input to VGA input. Try that and see. ... Dell E173FP 17" LCD Monitor

Screen comes up for about 10 seconds, then goes blank


Hello Robert,You have a monitor with a common problem. After a few years some LCD monitors will blow a power supply. The problem is ca ... LG Flatron L1750S 17" LCD Monitor

Monitor goes blank less than a second after turning on.


I have one an opened the unit. the power supply has an obvious burn mark on it. Looking FOr a replacement part to fix for less that $50 ... Proview PL926WBi 19" LCD Monitor

Blank Laptop Screen


The same thing began to occur on my (old as the hills) Dell Inspiron 2650 about 2 months ago. I have tried updating the BIOS to the newest Dell has for this laptop but it didn't help. I also tried to update the video drivers (no help), regressing t ... Toshiba Satellite 1410-S173 Notebook

Pavilion f1903 silver goes blank seconds after turning on.


The monitor you have has bad components on the circuit boards inside.This is a classic problem with all LCD monitors.I rebuild them on a daily basis so I recognize the symptoms.I would suggest finding someone who can do component le ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Monitor displays breifly then goes to blank screen


The green power light indicates that the monitor is receiving from the\015\012computer correctly. I suspect it is going into high voltage\015\012shutdown. There is a safety circuit that monitors the high\015\012voltage and shuts the monitor down if ... BenQ FP731 17" LCD Monitor

Monitor displays breifly then goes to blank screen


The power -inverter board probably needs an overhaul.\015\012I redo many of these.\015\012If the screen was pinkish or flickering before it finally got to this point, it is possible that a bulb has gone bad.\015\012Fran ... Proview PL926WBi 19" LCD Monitor

My monitor shuts off(goes blank for a few seconds


The monitor is doing a self test a finding an error.The lcd has three parts, the screen plate(windows)/the logic(vga)/the inverter(power plug). Parts that go are the backlight ccfl's, behind the plate, and parts of the inverter, ie capacitors, ... LG L1915S 19" LCD Monitor

Monitor goes blank less than a second after turning on.


I start my computer and turn it on, and everything looks fine for about 1/4 of a second and then it goes black while leaving the power light green. I can only see the screen again after turning it off and on, but that's only for another 1/4 second. W ... Rosewill R700J 17" Flat Panel LCD Monitor

My computer begins to load windows, then after the screen with the windows logo and bars goes away my screen goes black.


Nine times out of ten if that's when your display stops, it's simply because your display settings are set to something that your monitor can't handle. Depending on what it's not supporting, some monitors respond by going black ... others just ... Dell Latitude D800 Notebook

The monitor goes blank after just a few seconds or sometimes works for hours.


Two possible causes are bad capacitors or a bad light inside the LCD panel.\015\012\015\012Open the unit and check to see if any of the capacitors in the power supplyor other boards look domed or vented on the top.\015\012\015 ... ViewSonic VX924 19" LCD Monitor

Screen goes blank within 1 second of being turned on


Bad capcitor in the psu would cause this to squel and even pop so have it looked at you be glad you did. ... ViewSonic VA720 17" LCD Flat Panel Monitor

Blank screen with intermittent operation


You have bad capacitors in the power board inside the monitor replace these and the monitor will work fine ... ViewSonic Optiquest Q9b 19" Flat Panel LCD Monitor

Samsung 913v Self Test fine but screen goes blank in seconds


Monitor is definitely going bad, one thing you may want to check, if you can get in the back of the monitor you'll uncover two boards, a power board and a main board. Look for any capacitors that are puffy. Instead of a flat silver top they will ha ... Samsung SyncMaster 913V 19" LCD Monitor

I can press F8 and press reboot and the screen goes blank. How do I resolve the problem


First things first ... let's get you a bootable system.\015\012Boot in safe mode - press F8 when the Windows loader presents you with the\015\01230 second list of choices, and then select "Safe Mode" as your boot option.\015\012Righ ... Everex StepNote NC1500 Notebook

X191w blank screen after 2 seconds


Just got off the phone with Acer Suppport. This was after I sent an email to them, that suggested that I call. 8-/ annoying. So the guy on the phone says there is one thing that we can do before sending it in. Unplug it completely for the wall and co ... Acer X191WSD Monitor

I am facing problem with my Samsung LCD monitor, when I switched on my Computer it shows the bootup screen, after booting the LCD screen goes blank, when i turned off the monitor and again turned ON the monitors screen comes alive for 2 to 3 second and after that its goes to blank.


Try to do this: Just before the Windows start up screen (after the bios loading) press F8 and log in at safe mode settings. If at this mode you can see your screen change the resolution settings at a lower set. Save and reboot normally. Now try step ... CTX S762A 17" LCD Monitor

Monitor Goes Black


... ViewSonic VP191b 19" LCD Monitor

Laptop display goes blank after a second, not lcd inverter


I have a problem with the HP Pavilion tx2500. the problem is the screen does not show any display. I think it is related to the motherboard. how to solve the problem. ... HP Pavilion tx2500z Notebook

Screen goes bank after 2 seconds even if powder light is on


... Samsung 225BW LCD Monitor

Screen goes bank after 2 seconds even if powder light is on


I just finished repairing a 20 inch acer monitor that had the same issue.... you have to take it apart and examine the power supply side of the monitor. there are capacitors that go bad on that board. you can tell be feeling the tops of them... the ... Computer Monitors

The screen goes blank after 5 seconds


Make sure you have the correct drivers install for you video card. Also, check to make sure your resolution is not set to high for you video card. To get to resolution; right click on Desktop > click Properties > press Settings Tab, from ther ... ViewSonic VG900b 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.5529 seconds