Having problems with your HP w1907 LCD Monitor ?

Hp 1907w monitor locking up

\015 I am looking for some help with the monitor on my grandparents (hp 1907w) computer. They leave it on all the time and today it locked up with what looked like the bottom part of the screen picture repeating over and over again. Like when the horizontal hold needs adjusted on a TV but without the movement. I shut it all down, waited a few minutes and turned it back on. It booted back up but the monitor kept going into sleep mode before it was all the way back on. Finally, I got it to stay on long enough for my Grandpa to get through one game of solitare and he stopped playing for awhile then it happened again. Any ideas on what to try would be greatly appreciated!\015

Answers :

Go into the monitor menu and choose factory reset....Make sure the resolution is set correctly. (see here.)
\015\012You might want to run My Display, or install it if you haven't (See here)
\015\012Make sure the latest drivers for your os are installed. See here and here., and this tutorial for updating your video card or graphics adapter.
\015\012I've seen some reports in the forums about sleep problems on these, but the cause could easily be the pc. If you can, switch monitors to confirm the fault to be with either the pc or the monitor, and try the monitor on another system...
\015\012That's all I can offer you right now, as the HP site seems to be having trouble this evening...
\015\012
I hope this information allows you to resolve this issue. If you need further assistance, please post back with a comment to this thread.
If I've managed to answer your question or solve a problem, please take just a moment to rate this post....thanks!
Yes don't buy HP, they are famous for breaking down just outside the warranty.
Repair Help & Product Troubleshooting for HP w1907 LCD Monitor

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hp 1907w monitor locking up


Go into the monitor menu and choose factory reset....Make sure the resolution is set correctly. (see ... HP w1907 LCD Monitor

OSd lock keeps on poping up on my screen, i ihave viewsonic monitor. how can i solve this problem?


You are having a problem with the OSD lock on your ViewSonic Monitor. Is that correct?If so, please follow these instructions to unlock or lock your monitor.On some display devices, there is an OSD Lock that locks all current control set ... ViewSonic E70f 17" CRT Monitor

Osdlock on my computer desktop for 17'' monitor


You are having a problem with the OSD lock on your ViewSonic E70f Monitor. Is that correct?\015\012If so, please follow these instructions to unlock or lock your monitor.\015\012On some display devices, there is an OSD Lock that locks al ... ViewSonic E70f 17" CRT Monitor

OSD Lock I've got an AOC TV Monitor for my conputer and somehow it has managed to lock itself, whenever i press anything all I get is OSD Locked, please help.


\015\012\015\012 OSD Lock Function: To lock the OSD, press and hold the \015\012 Left button while the monitor is off and then press power \015\012 ... AOC LM729 17" LCD Monitor

OSD lock - I think


This is for Viewsonic LCD, but it's probly pretty similar for you...OSD and Power Button Lock ModesOSD Lock This mode locks all current control settings and prevents access tothe control menus until this mode is unlocked. ... ViewSonic E70f 17" CRT Monitor

Monitor control lock problem


Replace the small 78L05 regulator 5V supply to micro. ... Computer Monitors

Volume and brightness controls locked in my computermonitor.


If it is locked on the monitor itself look through the on-screen menus for a factory reset option that should do the trick.  if it is locked from the computer make sure that it is not just a problem with the audio/video card driver software. man ... PC Desktops

The button on the front has functions but when I press either the left hand side or the right hand side it just comes up with a message ''OSD Locked'' What does this mean


OSD Locked means that your On Screen Display is locked. That basically means you can't access/change the menu settings. The way to unlock the OSD varies from manufacturer to manufacturer and even monitor to monitor. Here are a couple different ways t ... Computer Monitors

My computer screen has a blue box that pops up and say "Controls locked". I am assuming that the buttons on the bottom right hand corner of my moniter is what it is talking about because when I hit the Menu button, to change the color or contrast, the box comes up again and says that the controls are locked. how do I unlock them in order to get rid of the box that says "Controls Locked"?


This is from the user manual for the monitor. You can download a copy from hp here:http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=324216&os=228&lang=en&Click on the "monito ... HP Pavilion F1503 15" LCD Flat Panel Monitor

Monitor's "Control Lock/Unlocked" menu appears by itself


I have a PDF of the service manual, and I'll be glad to email to you upon request. It may help.\015\012\015\[email protected] ... SAMTRON 78DF 17" CRT Monitor

Hi...just bought a brand new asus CG 5290 and the monitor won't come on....ideas???


Is your monitor power led shows on?If it is not on then make sure power cable connected properly to monitor .Change power code then try.If power led is on then make sure monitor cable is connected properly to cpu vga port.Chec ... ASUS Computer Monitors

Computer Does not Boot correctly, Monitor is Black.


Very interesting...Might try the following...\015\012- Video. Yes, almost garuntee that it is either the video card/onboard or the cable. Look at the cable and cable connectors and see if one of the pins has been shoved in. This is common. O ... PC Desktops

I have a Dell monitor that was donated to our church and all that comes on the screen is a white. the power is on but there is nothing but white light


Please check that when u power on ur computer then the Num Lock Key of Key Board is on or off. 1- If num lock key is on & monitor is displaying white screen then the problem is with ur monitor. For that u check the VGA cable going fro ... Computer Monitors

Want to unlock my monitor


This is the function that locks the OSD in order to keep the current states of\015\012settings or prevent others from adjusting the current settings.\015\012\015\0121. Lock : Hold down the menu button for more than five seconds to a ... Samsung SyncMaster 713BM 17" LCD Monitor

OSD locked how do I unlock - AOC 917Sw 19" LCD Monitor


OSD Lock Function: To lock the OSD, press and hold the Left button while the monitor is off and then press power button to turn the monitor on. To un-lock the OSD - press and hold the Left button while the monitor is off and then press power button t ... AOC 917Sw 19" LCD Monitor

Monitor flickering and adjustment buttons locked


If the refresh rate is not properly set the monitor may have a wavy or an appearance that lines are going down ... This may also cause a flickering affect.\015\012Distorted or skewed image on monitor.\015\012Issue:\015\012D ... Samsung SyncMaster 940N Flat panel Monitor

When I start my computer up my Philips Monitor


Good day sir/maam, hi, the problem may not be your monitor but your PC, they produce the same symptoms if your PC has no video to display. does your monitor led/lamp lights up as turn on your computer? If you want to test your monitor, go bring it to ... Computer Monitors

Monitor what does OSD LOCKOUT ME


Hello, The OSD (on screen display) is a lock feature that locks out all access to the control functions. Basically you can use this feature to lock the access to the control functions once you have everything set the way you want it so no one ... HP Compaq WF1907 Monitor

Computer Does not Boot correctly, Monitor is Black.


Hmm it seems to be problem with Power Supply, but still if you can give a try connecting your system into other socket may be which is properly grounded one.\015\012\015\012if the above didn't fix your issue, i would suggest you to disassemble ... PC Desktops

Computer Does not Boot correctly, Monitor is Black.


Try to reinstall the OS..if it doesn't work then there would be a problem with ur motherboard becaouseof failure of IC's. So contact the service men. ... IBM Aptiva E 240 (2158240) PC Desktop

OSD Lock Problem


I have a hanns g 22" widepanel , I had the same problem with lockout. I had my monitor disc and looked on it, or in a manual if you still have it. Here is the combination I had to press and it worked. I pressed the arrow buttons and the menu butt ... Hannspree HW191D LCD Monitor

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

When I push any of the following buttons menu, speakers or the auto select nothing happens all I get is the following message OS-Sperrung


HI,Initially, try connecting the monitor to another computer to check if its driver or monitor problem.If you get the same display even after connecting the monitor to different computer ist problem with the monitor, so follow STEP 1. ... HP Computer Monitors

MONITOR locked MONITOR black. there is a symbol of a lock on the back next to a rectangular hole. what is it? what could be my problem


It's most likely a locking point to fit a Kensington type security system to lock the monitor to the desk.\015\012\015\012Does anything happen at all when you switch it on? ... Xerox XG-91D 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3774 seconds