Having problems with your HP Vectra VL420 Intel Desktop PC - Intel Pentium 4 1.6GHz, 256MB SDRAM, 20GB IDE HDD, CD-ROM, Integ ?

The jumpers are not labeled on hard drive

\015 I want to add a hard drive as a slave. The jumpers are not labeled on the new hard drive. It is an HP P/N P6080-60101, 40 gig\015

Answers :

If the sticker is not on the top showing where the jumper pin goes, you can do an online search for the make and model of the hard drive. A "new" hard drive usually comes with a booklet giving you specs on it. Otherwise, it will be a process of elimination of moving the jumper from one set of pins to next until your computer recognizes it as a slave. This will require shutting down and unplugging your computer, moving the pin, and restarting. Hope this helps you.
Repair Help & Product Troubleshooting for HP Vectra VL420 Intel Desktop PC - Intel Pentium 4 1.6GHz, 256MB SDRAM, 20GB IDE HDD, CD-ROM, Integ

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installation of a 2nd hard drive steps & tips


Step 1: Back up and scout around\015\012 First,\015\012back up your critical files (don't forget your Outlook .PST archive) to\015\012optical discs, an external drive, or online storage. Then check whether\015\012a CD comes with t ... HP Pavilion a1410n (ER890AA) PC Desktop

The jumpers are not labeled on hard drive


If the sticker is not on the top showing where the jumper pin goes, you can do an online search for the make and model of the hard drive. A "new" hard drive usually comes with a booklet giving you specs on it. Otherwise, it will be a process of eli ... HP Vectra VL420 Intel Desktop PC - Intel Pentium 4 1.6GHz, 256MB SDRAM, 20GB IDE HDD, CD-ROM, Integ

I have a dell 4600 that I got from my daughter . which I had to re-install and It has a password in the bios for the set up and my daughter dont know


\015\012 \015\012Hi katmbutts;\015\012 \015\012 \015\012Before attempting to bypass the BIOS password on a computer, please take a minute to contact the hardware ... Dell Dimension 4600 PC Desktop

How to install second internal hard drive


Yes, you can use, Please see label attached to the harddrive for a jumper setting to become primary harddrive.\015\012\015\012in the DVD rom there's also a label on it. but the most common setting is slave is in the center.\015\012 ... Acer Aspire™ T180 PC Desktop

Can I add an additional internal hard drive? - HP Pavilion a350n PC Desktop


Hi,Yes, you can add additional hard drive.Please follow the below steps to add the drive sucessfully.STEP 1:Make sure you have room for an extra hard drive, here's one way to do this: 1. ... HP Pavilion a350n PC Desktop

I want to replace the hard drive. I have the new hard drive but I am unsure how to procede


The 13 Easy Steps to Installing a Primary Hard Drive\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012Compiled By Our Editors\015\012 Believe \015\012 it or not, all it takes is less than a ... PC Desktops

DeskTop Hard Drive TroubleShoot


If you attached the new hdisk as an addition then you just have to change jumper settings of your hdisk. your old hdisk you should change jumper to slave then the new one to master. you will see that jumpers at the rear end of the hdisks. check the l ... IBM ThinkPad T40 2373 Notebook

Keyboard not lit up and screen blank but on. Running hard


I would get another hard disk, replace the old one with it, and plug your old hard drive into the other drive controller socket (rigt next to where your HD is plugged in now. you can plug them both onto the same ribbon cable if it has enough plugs on ... Compaq Presario s4020wm (DK214AR#ABA) PC Desktop

2nd hdd how do i install a 2nd hard drive in the ultrabay 2000.i bought a hdd caddy for the ultrabay and put a 20 gig hdd in for extra storage.but when i turned my laptop on it wouldnt bootup. said operating system not found etc. what do i do?i have a ibm a31 i have a t21 2647-47u thinkpad with ultrabay i am trying to install the 2nd hdd. can you tell me the jumper setting for the 2nd hdd device 0 device1 or cable sel.thanks for any help you give


Both hard drives will need to be jumpered to a master and a slave or both have to be jumpered to cable select. normally the jumper setting are either on the label of the drives or are marked on the bottom of the drives near the jumper drives. if th ... IBM ThinkPad T21 Notebook

Found this drive in an old unit. Can I set jumpers to slave or secondary? No labels on it to show settings


Presuming you are referring to a hard drive ,it depends on a few things , firstly when you removed this drive from the older system, was it alone or was there a second hdd presesnt, if the drive was alone ,chances are that it was a single standalone ... PC Desktops

I have a dell dimension and i cant get my cdrom to read anything


On the mother board there should be 2 IDE cable connected. Typically there is labeling on the motherboard by each connector identifying the cable (IDE0 / IDE1)The IDE0 connector is for hard drives. Ensure your harddrive is setup for cable ... PC Desktops

How to set hard drive jumpers - PC Desktops


Not every drive writes SL,CS or MA, but all of them print on the label a small picture about the jumper settings, follow the picture.\015\012\015\012If the frive is IDE (40 pin data cable), and the only one in the computer, install withou ... PC Desktops

I have an HP pavilion pc that wont turn on


You prolly had the jumpers on the new dvd drive improperly set, you want them set to cable select for most cases. \015\012\015\012if, on the top or bottom of the dvd drive, it does not have a diagram of which jumper is the master, slave ... HP Hewlett Packard Pavilion Slimline S3100N PC Desktop

Have rs480m motherboard need the 2pin sequence to hook up the hard drive ''e-machine t6520''


I assume you are looking to connect another hard drive in your computer.\015\012Most desktop computers have two IDE controllers.\015\012The 1st controller will have the "C" drive set to Master (MA) and there maybe another drive CD or DVD ... E-Machines T6520 PC Desktop

My computer w2686 do not start


I'm assuming that when you say "unplugged" that are you are meaning to say that you're unplugging the IDE ribbon but still leaving the power plugged in to the device.Try resetting your CMOS settings by using the jumper on the motherboard. ... E-Machines eMachines W2686 PC Desktop

Can't get pass the blackscreen password - PC Desktops


That is the BIOS passwordUsing the\015\012 Motherboard "Clear CMOS" Jumper or Dipswitch settings\015\012 Many motherboards feature a set of\015\012 ... PC Desktops

No Master drive 0 found


Hello!\015\012\015\012this problem is made loss connection of the hard drive, Busted battery In the motherboard, Is this new harddrive? if yes then check the jumper setting, see label setting on the hard drive. I ... Dell Dimension™ 4600C PC Desktop

Power buton permanently on but system won't start


Ther original haddisk is primary master, and should the 2nd must be primary slave. If you connect the 2nd hard drive where cd rom place , you get the jumper to make it slave. see jumper setting on hard disk label. \015\012\015\012and try ... Dell OptiPlex GX260 PC Desktop

WD 5GB nternal EIDE drive is detected by BIOS but not by Win XP.


New drives are not usually formatted, so the drive will not show up in the drive list when My Computer is opened. As this may be the case, the drive will need to be initialize and formatted.\015\012 \015\012 ... Dell Dimension 2400 PC Desktop

Old HD to a "new" PC


I had the same problem hector, I don't know if you figured it out yet, but you can't have a hard drive and an optical drive (dvd/cd/ect..) on the same IDE cable. It just won't work, the only explanation I've heard that made much sense to me was that ... Gateway GT5408 PC Desktop

Need jumper diagram for motherboard


Hi,Check that the hard drive is set to "slave" on the jumper settings where you connect it (if it's IDE). Also, check the boot order in the BIOS (or setup as it may be called when booting up) to make sure that they computer's not trying t ... Dell OptiPlex GX520 PC Desktop

I just recieved the replacement hard drive from acer how do I remove the existing on on the 5315 I have removed the keyboard before on my dells to add ram is it similar for the aspire


This is a HDD replacement i assume. As long as you have the cd of your operating system amd know how to install it, then replacing the HDD drive goes like this: After unpacking check and verify that the jumper setting is set to master. There might ... Acer PC Desktops

How to install a second dvd player in my compaq


The computer needs to be opened up to properly install the CD or DVD drive into the computer. The method for opening the case will vary depending upon the case. Most new systems will use a panel or door on the side of the system while older systems m ... Compaq PC Desktops

Jumper settings for a Maxtor Model 52049U4 internal hard drive


Look on the label on the drive itself ... PC Desktops

Friend gave me an hp pavillion zv5000 that they couldnt get to work. it needs the power on password and they dont have it. i am a pc tech so i have no problem with doing any kind of laptop surgery. would appreciate any help as this is driving me crazy! you can email me direct at:


Method 1 : Removing the CMOS BatteryThe CMOS settings on most systems are buffered by a small battery that is attached to the motherboard. (It looks like a small watch battery). If you unplug the PC and remove the battery for 10-15 minutes, the ... HP Pavilion zv5000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4665 seconds