Having problems with your HP RY117AA w2408 24" Widescreen LCD ?

The sceen say's osd lock out and also the menu screen for the monitor is stuck on . The menu,+,- and auto set buttons wont respond


Answers :

OSD Lock-out — The OSD can be enabled or disabled by pressing and holding \012the Menu button on the front panel for 10 seconds. If the OSD is locked, the \012warning message “OSD Lock-out” appears for 10 seconds.

If the OSD is \012locked, press and hold the Menu button for 10 seconds to unlock the \012OSD.

If the OSD is unlocked, press and hold the Menu button for 10 \012seconds to lock the OSD.
My HP w2408 monitor. I just fixed this issue about 5 mins ago after getting tierd of whacking the buttons with anything handy. There are 2 slots on the underside of the monitor, in between the black frame and silver outer frame. Stick a flat screw driver and use a motion as if to literally pull the black frame away from the monitor. Use caution and dont stick the screw driver too far in. You will hear it pop. Do the same to the other side. There are multiple tabs arond the frame including one in the bottom center. Keep pulling on the free ends of the frame till all the tabs come off. Now you will see the buttom assembly, disconnect the small white connector from the montior. If you dont care for the buttons, which if you have a w2408 or any such model you will never use (auto detects input and auto adjusts) then just pop the frame back on. If you want to go further remove the 2 screws on the button assembly pull down on the silver frame to remove the button assembly. I did not go further then this but i read somewhere that if you wash the assembly in some liquid it will work again. I am guessing some good acohol from walgreens will do. For me I am just glad the message when away.
\015\012
\015\012Keep fixing and keep sharing! Corporations that sell to the masses will show respect only when the masses unite.
Repair Help & Product Troubleshooting for HP RY117AA w2408 24" Widescreen LCD

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The sceen say's osd lock out and also the menu screen for the monitor is stuck on . The menu,+,- and auto set buttons wont respond


OSD Lock-out — The OSD can be enabled or disabled by pressing and holding \012the Menu button on the front panel for 10 seconds. If the OSD is locked, the \012warning message “OSD Lock-out” appears for 10 seconds. ... HP RY117AA w2408 24" Widescreen LCD

OSD Lockout I have a HPw22 22" monitor and the OSD Lockout message has been appearing randomly. I have tried to hold down the menu button for 10 seconds, hooking it up to a different computer  and neither one of these seems to fix the problem. Any suggestions would be greatly appreciated.


Hold the menu/ok button for ten seconds, to unlock the OSD.\015\012If this doesn't solve the problem, then it's probably the button that got stuck.\015\012\015\012There are two things you can do to repair it, but both require that y ... HP vs15 15"LCD Flat Panel Monitor

Monitor menu shows up all of a sudden


Unplug then open the case then remove the little white plug from rear of\012 switches job done no power light or buttons but picture is fine ; ) ... Relisys TL775 17" LCD Monitor

LG 710s monitor problem screen turns green


Your AUTO settings button is stuck in! Try tapping on it a few times. Otherwise you may have to take the frame apart so you can get at the button. ... Amptron AMV 17V5 17" LCD Flat Panel Display 500:1Analog 15-pin D-Sub, Digital 24-pin DVI-D Silver with black... Monitor

OSD LOCKOUT MY COMPUTER WILL DO NOTHING...ALL IT SAYS IS OSD LOCKOUT..HOW DO I FIX THIS??


Hold the menu/ok button for ten seconds, to unlock the OSD.\015\012If this doesn't solve the problem, then it's probably the button that got stuck.\015\012\015\012There are two things you can do to repair it, but both require that y ... Acer AL1715 (Black, Silver) 17" LCD Monitor

OSD Lockout My name is Patsy Davis and I live in Charlotte, N.C. All of a sudden, something called "OSD Lockout" keeps popping up and I can't seem to be able to turn it off. It is driving me crazy. Can you help me get rid of this thing? I can't even hear the audio programs on my computer. Patsy Davis [email protected]


Hold the menu/ok button for ten seconds, to unlock the OSD.\015\012If this doesn't solve the problem, then it's probably the button that got stuck.\015\012\015\012There are two things you can do to repair it, but both require that y ... HP vs19 (Silver) 19" LCD Monitor

Osd locked - Philips 190B6CB/27 19" LCD


Hold the menu/ok button for ten seconds, to unlock the OSD.\015\012If this doesn't solve the problem, then it's probably the button that got stuck.\015\012\015\012There are two things you can do to repair it, but both require that y ... Philips 190B6CB/27 19" LCD

My computer screen has a blue box that pops up and say "Controls locked". I am assuming that the buttons on the bottom right hand corner of my moniter is what it is talking about because when I hit the Menu button, to change the color or contrast, the box comes up again and says that the controls are locked. how do I unlock them in order to get rid of the box that says "Controls Locked"?


This is from the user manual for the monitor. You can download a copy from hp here:http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=us&product=324216&os=228&lang=en&Click on the "monito ... HP Pavilion F1503 15" LCD Flat Panel Monitor

My HP 2009m goes into sleep mode & shuts down


I just bought a 20 inch HP 2009m monitor about 2 months ago.One of the functions within the monitor, is to go to 'Sleep' The Sleep mode is to keep the monitor active, but using very little power.(I always turn mine off w ... PC Desktops

Monitor menu shows up all of a sudden


Throw ur monitors & get a new one heeeeeeeeee ... ViewSonic E70f 17" CRT Monitor

Viewsonic VX2235wm Horizontal Image Problem


Tricky one. Have you tried using different dispay resolutions from your Windows Display Control Panel? \015\012ie 1200x1014, 1600x1400, etc.\015\012\015\012When you say you used the manual adjust, do you mean the horizontal sync opt ... ViewSonic VX2235wm LCD Monitor

My monotor its all black but u can


HelloI got this step by step guide to reset a dell monitor i do not know if it works, but you can still try it.Hope This can help you.Instructions\015\012\011\011\011\015\012\011\011\011\015\012\011\011\011\015\012\011\0 ... Dell Computer Monitors

How do i do a full reset? I would like it back to factory settings.


Click on Start, All Programs and click HP My Display, Again Click HP My Display and than you can follow the on screen display to reset it.Also you can use the front panel buttonsPower Turns the monitor on and to standby or sl ... HP w1907 LCD Monitor

Monitor displays 'user mode' contrast icon @ 89%


ColinIf you can access the on-screen menu (see link below for manual) try and reset to factory settings.http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c00385928/c00385928.pdfIf that doesn't resolve t ... Compaq CV 7500 17" CRT Monitor

Main control problem


Hi \015\012These are the solutions i found check these and try i think your problem will be solved\015\0121.Reset the OSDThe easiest solution to try is to reset the on screen ... Philips 190B6CB/27 19" LCD

Relisys TL766 monitor. OSD menu continually open, wont close. Standby button doesnt always function.


Here is a definite solution to all those having problems with OCS menu on Relisys TL 766 Monitor.Having tried many of the posted solutions none of which worked. The only option was to visit my local PC repair shop who disconnected the OCD monit ... Relisys TL 766 Monitor

Vertical positioning setting is frozen


Lets see what i can do \015\012sometimes under the screen edge either side or bottom they have the menu buttons these have become hard to find but there on your screen on one of the buttons the select should be de gaus (spell check) this sends ... Acer AL1715 17" LCD Monitor

Monitor stuck on black, menu buttons not responding


It's sort of a solution, but I work in a computer shop and got this screen in yesterday. I looked at it closely and it's actually the backlight that died. I pulled it apart and found that three of the 820uF/20V capacitors had swollen up. If you repla ... Samsung SyncMaster 740N 17" LCD Monitor

Memory recall iam from chennai,india and i bought a view sonic E70B colour monitor last year.since once month its giving "memory recall ok?" and asking for yes or no.even after trying both the options its giving the same thing again .and the extension of this is ,afte few days of this "recall ok" appearing frequently,its changing contrast ,brightness ,and what not ,automatically .this is creating a lot of problem .it seems the keys at the bottom of the monitor have failed please suggest a solut


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not ... ViewSonic E70 17" CRT Monitor

Memory recall mine is one year old view sonic monitor .from the past one month its showing problems in display.its giving "MEMORY RECALL OK?" and this whether i press any of the two buttons asked for ,is appearing very frequently.this is continuing for some hours and then automatically without my pressing any buttons its adjusting the contrast ,brightness pincushion and what not .this is creating a lot of problem for me .please suggest a solution


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not ... ViewSonic E70b 17" CRT Monitor

MEMORY RECALL OK? problem mine is view sonic monitor .from the past one month its showing problems in display.its giving "MEMORY RECALL OK?" and this whether i press any of the two buttons asked for ,is appearing very frequently.this is continuing for some hours and then itself vanishing. Till then i m unable to do my work on the sys...as i m find it in d middle...


From the Users Manual for this monitor:\015\012"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of \015\012\015\012this manual. - Exception: This ... ViewSonic E70b 17" CRT Monitor

MEMORY RECALL OK?


From the Users Manual for this monitor:"Memory Recall returns the adjustments back to factory settings if the display is operating in a factory Preset Timing Mode listed in the Specifications of this manual. - Exception: This control does not a ... ViewSonic E70f 17" CRT Monitor

Graphics is horable when I play games like Frank Herbert's Dune


Reset your monitor to its factory settings by using the auto config..Take the bios battery out of your laptop or desktop and restart with the battery off..then reboot..If this works please rate me. ... Acer AL1916B 19" LCD Monitor

Osd lock in my LCD


Check your switchers resolution settings .....\015\012You might have to change your resolution settings....\015\012 \015\012This solution is for AOC Monitors...... ... X-10 LM929 19IN LCD 12X10-.294MM SPK BLK

The auto-darken feature(monitor goes dark on dark


In your monitor panel you'll find 4 buttons. Press the menu button and get into Magic Bright. There you can choose the one that best suits you. You can even set to Dynamic contract where the monitor adjusts the brightness according to the elements on ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1028 seconds