Having problems with your HP ProLiant ML110 Server ?

HP Proliant ML110 Server RAID setting

\015 I've transfered data from a previous server into a Proliant ML110 server hardisk using a 3.5 hardisk enclosure. then I've put the hardisk back in and I find out that the RAID setting make 2 hardisk become same. so all data that I've tranfered (for 3 days) gone just like that. so if I want to trnsfer the data again, and don't want the same thing happen again. How must I do it? Please advice.\015

Answers :

If you have the RAID 0+1 or 1 ,beacause of the mirroring ,2 disk will be the same.you should be attention ,if you transfer data on the first disk,you must boot your server with that disk.when the system boot completely then you put the second disk ,beacause of the Raid 0+1 or 1 the data of the first disk automatically write on the second disk.
Repair Help & Product Troubleshooting for HP ProLiant ML110 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HP Proliant ML110 Server RAID setting

If you have the RAID 0+1 or 1 ,beacause of the mirroring ,2 disk will be the same.you should be attention ,if you transfer data on the first disk,you must boot your server with that disk.when the system boot completely then you put the second disk ,b ... HP ProLiant ML110 Server

Problem with scsi driver proliant ml 370 for NT4

Are you attempting to boot from the Windows CD?If you are booting the server from a Windows installation disk and it is unable to detect the hard drive, this typically means the following things. You need to provide the driver for ... HP Compaq ProLiant ML530 Server

Harddrive array sequence causing system in booting

If the only drive you changed was the drive that failed and all the others are in the correct sequence, then that's a good thing. \015\012\015\012The next question is, did you have this system setup in a RAID Array and if so, what RAID co ... HP ProLiant ML370 G4 Server

02A2: BMC System Event Log(SEL) Full

In HP prolliant server sets, setup also logs system events. This error is due to that log. Enter setup, trace log and clear all events. ... HP Compaq ProLiant ML110 G4 Server

Meaning of Symbols on Hd rack?

If the server is configured with split SCSI channels these indicate which bays are part of each of the two channels. The common use for this would be to use the split with two drives for a RAID 1 system drive and the remaining four for RAID 5 data o ... Compaq ProLiant DL380 Server

Scsi raid with battery backed memory for pweredge 2550 server

If my memory serves me correct i think this server uses a onboard (3di) card it is set in the bios to use the raid configuration, under integrated devices .make sure this is so ,as it boots press f2 key to enter.If this is so exit.next step is to sh ... Dell PowerEdge 2550 Server

Dell Poweredge 4300 Bootup problem after cmos battery replacement

Check the version for the Raid Controller. This may need to have the firmware to be upgraded. If the controller is removable, take the controller out and then see if the computer will continue past the bios. If the controller is built-in, then disabl ... PC Desktops

We have HP proliant 380G5 server with Microsoft windows 2003 installed what additional hardware & software is required to make it as a Database server

You need a database program - Microsoft SQL, MySql, Access, etc... Setting up RAID will help your speed. ... HP Compaq Proliant DL350 (345101-001) Server

I have HP proliant DL160 server. How i will make RAID two HD?

Try going into the RBSU(Rom based setup utility) and configuring SATA RAID in the advanced section.\015\012\015\012This doesn't work for all versions - if it doesn't help, please be more specific about your configuration, i.e. what "G" le ... HP ProLiant DL160 G5 (445198-001) Server

Ugrade of DL380 G4 Server HDD Raid Array 36GB --->146GB Required

Try to look at this ... HP Compaq ProLiant DL380 G4 Server

No SCSI Chips found on the adapter

You might want to update the firmware for the scsi controler,plus upbate the esm ,and the backplain for the server ,you should be able to locate this on the support.dell.com website.failing that if you are using a raid card this might be bad,however ... Dell PowerEdge 6400 Server

Redhat es5 seems that the redhat installation procedure can't recognize dl380 G4 as a 64 bit machine. (after installation there is no /lib64 nor /usr/lib64). Is it neccessary to configure something specific in the installation stage that refer to this issue?

OS Supported by DL380 G4 According to HP website are : -» Microsoft Windows 2000 » Microsoft Windows Server 2003 » Microsoft Windows Server 2003 for 64-bit Extended Systems » ... HP Compaq ProLiant DL380 G4 Server

Dell RAID controller in HP server? Hi i have dell (Adaptec) CERC SATA1.5/6ch RAID card, now i want to use this card in HP proliant ml150 g3 server, after fixing this card server did not recognize it keeps idle. so what should i do to use this card in my server. thanks in advance...

This particular device will require drivers for the Operating System to use. Also the hard disk drives will have to be installed an initialized outside the Operating System first before use. This is usually during startup after the system BIOS. ... HP ProLiant ML150 G3 Server

1 Adaptec RAID 3085 cause parity error in server while 2nd don't!

... Acer Altos G530 Server

HP Compaq ProLiant ML110 G4 Server Problem

How to load HP Compaq ProLiant ML110 with windows 2003 server cd ... HP Compaq ProLiant ML110 G4 Server

Cant seem 2 b getn the drivers 4 xp got a ml110 any gud sytz!!!

Hello,\015\012\015\012HP build the proliant range of servers to support server OS's like Windows Server 2003/2008 and Linux etc. HP do not support any drivers for these servers for Client OS like Windows XP. You are best to locate the bas ... HP ProLiant ML110 Server

Compaq ProLiant ML370 G3

Hello,\015\012\015\012How big if your environment? How many users? Do you have remote access needs? If your environment is under 75 users then you might want to consider moving to Windows Small Business Server. It's a great little pack ... HP Compaq ProLiant ML370 G3 Server

Server''s temperature is outside of the normal operating range.

... HP Computer Servers

Boot a Tyan Mobo from a SATA AID

... PC Desktops

HP Proliant ML110 drivers required - HP ProLiant ML110 Server

Ge the Proliant Support Pack(PSP) as this will update all drivers at one time. If you haven't loaded an OS yet, get the SmartStart CD download. This will pre-populate the drivers on the server before starting the OS installation. ... HP ProLiant ML110 Server

I just managed to mess up my 1600 SC with Linux Mandrake. I want to change it from raid 5 to Win 7 and turn it into a JBOD. I can't get it to recognize the dvd player so the win disc won't fire up...ideas? Thanks!

Is there a RAID card Eg PERC installed? If so, did you use the hardware raid setup? Also, Why do you want to put Windows 7 on a Server? Have you thought about Windows Server 2003 or 2008?Open her up and check all the connections and also ... Dell PowerEdge 1600SC Server

Dell power edge 1600 server

Is this hard drive in a RAID set? if it is, you will need to replace it with the exact same drive. After you do that, you will need to go into the RAID controller bios and initiate a rebuild. ... Dell PowerEdge 1600 ( pe1600sc/118/np ) Server

I need to download an hp proliant ml110 driver for window xp

HP does not support XP on their servers so you won't find appropriate drivers on their site under the ML110. The 110 is low end and in reality shares more in common with mid to high end PCs than othe servers though. Other than storage drivers you w ... HP ProLiant ML110 Server

Dell PowerEdge 2450 Server issues

Power down thy system,pull the hard drive half way out remove all cards from the slots power up see if you go pass the processor etc,if not go into the system setup f2,integrated devices turn them all.see if you go further if you do go back in turn ... Dell PowerEdge 2450 Server

When doing new installation i can not find hand disk drives

Check your BIOS if it's detect your Hard Drive.If detected then check your system BIOS whether SATA setting is enable or not. Disable it if you have enable it in IDE configuration.If you find there is no way to configure SATA in your BIOS setting the ... HP ProLiant ML150 G2 Server
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4045 seconds