Having problems with your HP ProLiant DL360 G5 (457922-001) Server ?

There are three servers (2 G5s and 1 G4) these servers share a single monitor but i don't use any kvm switch.. I manually switch the connection of the monitor to access the three servers. i use G4 most of the time so i don't connect the monitor much to the two G5s.. the problem is, whenever i leave the 2 G5s without a monitor for a long time, i can't get any video output whenever i connect a monitor to them.. why was that?


Answers :

Do you try disabling Screensaver feature on those two servers...might that be causing display prob, if you try pressing any key or it would show screen
\015\012But still if it is not working, Check Power saving feature for these two Server, turn off featue to turn off display and harddisk if computer is standy by for......mins
\015\012
\015\012Hope it resolve issue, Best of Luck
Repair Help & Product Troubleshooting for HP ProLiant DL360 G5 (457922-001) Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

There are three servers (2 G5s and 1 G4) these servers share a single monitor but i don't use any kvm switch.. I manually switch the connection of the monitor to access the three servers. i use G4 most of the time so i don't connect the monitor much to the two G5s.. the problem is, whenever i leave the 2 G5s without a monitor for a long time, i can't get any video output whenever i connect a monitor to them.. why was that?


Do you try disabling Screensaver feature on those two servers...might that be causing display prob, if you try pressing any key or it would show screen\015\012But still if it is not working, Check Power saving feature for these two Server, turn ... HP ProLiant DL360 G5 (457922-001) Server

I was tring to Connect Two Computers to One Monitor, but i didnt get it, does someone know how to do so? I bought a KVM switch, USB to use between a new Acer running Win XP and old Dell with Win 98. Could not get the Dell to show up on the monitor, although the correct light shows up on the KVM and the USB mouse lights up when the computer boots. -- Read a few minutes ago about a source switch and found that my flat panel has a menu item to switch from analog to digital input. Could that be the


I guessing that since **-one responded you've given up and returned the whole mess but what the hey.A lot depends on the KVM you're using. There are some high end units that will match different sources to the monitor but most work best ... AOC 19LVWK LCD Monitor

Trying to use my hp laptop with sony lcd hdmi tv for movies


You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Beginner's startup problems


Hi there, you have several questions in one! I will attempt to answer them for you, however I may need more information on the latter question ref the Vista.\015\012Firstly, you are not required to make the 3 Cd's of the basic programmes, howev ... Fujitsu Siemens AMILO Pro V2010 Notebook

Hi,could some one walk me through setting up my Billion modem wirelessly to my Dell Desk top running XP home. I get confused with firewalls,LAN settings etc Ethernet cable is being used at the moment. Do you need drivers etc


I am not familliar with that brand, so I do not know if it is a cable/dsl modem, a router, or a combination of the 2. I will assume it is the cable or dsl modem since you said modem.The thing we need to do first is give you a basic unders ... Dell PC Desktops

Fitted a lexmark all-in-one printer to packard bell pc, worked ok (ish) then froze (the pc) -when switching on quite noisy (red light stays on on front) monitor when switched on has green light then automatically switches to amber after a few seconds - tried switching on and tapping both either f5 or f8 but cannot get safe mode - any advice please? thank you


I would hazard a guess at a possible power supply fan about to fail or cpu fan issue maybe causing an overheat problem.\015\012\015\012I have included information for both below\015\012\015\012disconnect the computer and take ... PC Desktops

Toshiba Satellite limitations on network adapters all wireless, need other


You need to log into the router setting by typing something like 192.168.*.* etc,check the right one for your router and enable some type of encryption like 128bits wep..Then your network is secured with a password which will stop anyone access.Now a ... Toshiba Satellite M40-S417TD Notebook

Display AL 1717 input not supported


Normal\015\012 0\015\012 \015\012 \015\012 false\015\012 false\015\012 false\015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 \015\012 MicrosoftInternetExplorer4\015\012 \015\012\015\012 \015\012 \015\012\015\012\015\0 ... Acer AL1717 17" LCD Monitor

Laptop to tv


If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Monitor not using all available space


Do NOT use the VGA cable. Only use the digital DVI cable for video. Using the DVI cable connect one end to the DVI connector on the monitor and the other end to the DVI connector on the video card. You should NEVER connect cables to ... Samsung SyncMaster 2253BW LCD Monitor

Where do we find the display lid switch for a HP Pavilion dv9715nr ? we replaced a damaged hinge on this laptop first and now we cannot get a display.


Let me guess. Damaged Left hinge? HP had a recall for this problem, but the recall has lapsed as of May 31, 2009. ... PC Desktops

I have a dell desktop, when I first plug it to the outlet, it turns on, everything turns on but I can even turn it back off, because its not connected to the monitor, the monitor says its on power safe mode, and when I click on any key on the keyboard or click the mouse nothing happens. Cant turn the computer back off through the power, I have to unplug it from the outlet again if I dont unplug it it will continue running nothing happens, i can hear the fan though


Wait, did I just answer your question on another post? If so then you weren't as detailed last time. It sounds like you either have a power switch issue or a power supply problem. Go ahead and plug it in, if it automatically turns on then hold dow ... PC Desktops

Red light on power up. No image on monitor. Pc fans working.


On a computer mainboard there are usually a number of connecting pins right next to one another called RESET, POWER LED, HD LED etc.The power led often leads to the green LED next your power button to show that the juice is available and on. Th ... Aspire Red X-Cruiser Mid Tower ATX Case without Power Supply (CSASXCRUSRD)

Dead pc Dell xps 410 won't boot all of a sudden. Power supply, statuslights, fans, HDDs, etc.. seem to be running, but nothing on screen, not even bios info. No new hardware or software and nothing weird leading up to this. Status lights combo code indicate bad memory, but I tried switching out the ram and nothing happened. Mobo went bad maybe?


Try to remove all external device connected to your computer. just leave the keyboad, mouse and monitor connected.\015\012restart computer. \015\012if still a blank screen\015\012remove everything connected to your computer (mouse k ... Dell XPS 200 PC Desktop

Blank Laptop Screen


Unplug everything from your laptop unplug the power from the laptop close it and turn it over remover the battery open and hold the on button(battery is still removed) for a 10 count, replace the battery\015\012turn on you can plug the power co ... Gateway MX6956 Notebook

No power to a SR1420NX.


Power supply light on or flashes\015\012Perform the following steps, in order, until power is restored or it is determined that there is a hardware failure:\015\012\015\012\015\012\015\012\015\012\015\012\015\012CAUTION: \015\012This product cont ... HP Compaq Presario SR1420nx (SR1420NXPS69AA) PC Desktop

Dead My computer dead when electricity was down. i test power supply to another computer, it works. i put windows xp and install, on the mouse and keyboard stops functioning and fail to command installation.


\015\012\015\012Check your Keyboard-Video-Mouse (KVM) switch. If the system is connected to a monitor, mouse, and keyboard through a Keyboard-Video-Mouse (KVM) switch, or console selector switch, then disc ... IBM NetVista PC Desktop

Monitor revives only after cycling the power many times


Unscrew 4 screws on the back side. Place the monitor with the front up and open it along the upper seam. Turn it again and lift the back cover. Shift the inner case "up" and take the button holding plate out - it is being held only by a tape. Inspect ... Dell UltraSharp 1905FP 19" LCD Monitor

I have a Dell Inspirion 1525, All of my wireless connections and signals are good and working fine. I get signal from the router on my home computer. But it will not do anything internet related. When opening Explorer, the diognostics says The Domain Server may be down. Can anyone translate?


This is quite a long reply and may appear very technical - however, have a read through and see what you can do / answer \015\012\015\012| |All of my wireless connections and signals are good and working fine.||I will assume by this you m ... Dell Inspiron 1525 Notebook

Hi, we have an Dell PowerEdge 1800 Server, Today we relocated the server for that we shutdown the server and Relocated.When we the Start system nothing is displaying in the monitor. Keyboard light's were blinking when i start the system. First time i misplaced the power supply and UPS plug points and started the system. after 10 seconds i realised that i was wrong and switch the PC changed the plug points after i am facing the above problem. Please help Regards, Venkat


Hi,Most of the systems will not start back when the system shutdown happens due to some power conflicts.To resolve your issue, please follow the below steps:1. Make sure that all the connections to your server is proper now.2. ... Dell PowerEdge 1800 Server

My LG 2353 monitor screen goes blank by itself. Sometimes it will go into sleep mode or sometimes my screen just blanks out and the power light stays solid red without flickering to indicate whether or not it's in sleep mode. I try hitting the enter button or any key and nothing happens. Eventually the screen comes back up whenever it feels like it. Yesterday the screen flickered a couple of times and then went blank. I've tried using a couple of other VGA cables and power cord, thinking maybe m


Shaylane_195, Good description of problem! But you left out one or two key things to tell me. Age of monitor? Approximate total "ON" hours of use? Is unit covered by LG (Lucky Goldstar) warranty? You and only you can tell me if the screen is reall ... LG W2353V-PF 23' LCD Monitor

White screen When ever I turn on my pc my screen stays white. I turn off pc turn on again still no monitor only white screen. Does this 5 or 6 times before it comes on the right way


I had problem with a Proview 19? monitor:\015\012Product number: #PL926Wbi\015\012Model Number: 900W\015\012The monitor was manufactured in January of 2006.\015\012\015\012After I had owned and been using the monitor for 1 year and two weeks, it star ... Proview PL926WBi 19" LCD Monitor

W1907 Monitor Goes Blank


If you still have this monitor type, you are obviously no longer under warranty and need some help, not "smart alek" or "return" it advise.The issue is with the power board that feeds the inverters which in turn power the CCFL bulbs. This mon ... HP Compaq WF1907 Monitor

I need help setting up the DVI input.


Hi,\015\012\015\012There are two ways to do this.\015\012\015\012First and simplest is to simply shutdown the pc, disconnect the analog from the back of your PC and connect the DVI cable to the PC and monitor. When you turn i ... ViewSonic VX924 19" LCD Monitor

Similar Problem:posted by Squanto on Feb 26, 2006


Before you give up on this monitor I would try some troubleshooting first. The clicking noise you hear is probably the monitor power going on and off:\015\012\015\012-Make sure you plug your monitor directly into a working wall socket. I?ve had lots ... Dell UltraScan 19" SVGA Monitor, 1600x1200, .25mm, Black P991/B-07
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1388 seconds