Having problems with your HP Pavilion ze2000 Notebook ?

"no signal" message when laptop is plugged into projector

\015 Laptop is an HP Pavilion ZE2000. Projector is a Sharp XG NV5XB. I am using a VGA cable to connect the Laptop to the projector, but the picture, from the laptop, does not transmitt through the projector.\015

Answers :

There is a key on the keyboard that has blue text on it. Something to the effect of LCD or CRT. With the monitor connected and turned on, press and hold the FCN KEY as well as the LCD/CRT key. While holding the FCN key keep hitting the CRT key until the image transfers to the external monitor
Repair Help & Product Troubleshooting for HP Pavilion ze2000 Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

"no signal" message when laptop is plugged into projector


There is a key on the keyboard that has blue text on it. Something to the effect of LCD or CRT. With the monitor connected and turned on, press and hold the FCN KEY as well as the LCD/CRT key. While holding the FCN key keep hitting the CRT key unt ... HP Pavilion ze2000 Notebook

I live in Seattle and have an Acer V193B that 'went dark' when I hot-pluggged the VGA connector into my laptop. I *assume* the problem is the chip that buffers the VGA lines is blown. (I know the cable and laptop VGA are not the problem.) The monitor has power (power button glows orange), there is just no video display. Is there any chance that I can get this repaired w/o spending more than the monitor is worth in shipping and repair costs?


First, to check the monitor.\015\012Disconnect the input signal from the computer.\015\012Turn off the monitor and unplug from the A/C source.\015\012Allow the monitor to set for a few mi ... Acer V193 B LCD Monitor

I have a Compaq Presario laptop with a broken


Hi:\015\012Just plugging in the monitor to your VGA port on the laptop won't make it display. You have to toggle to the exteral display, or both. Usually you have to hold down your function key, and then hit the external display key. It could ... HP Compaq Presario F761US Notebook

Check signal message when data cable unplugged. blank screen when data cable plugged


This problem is most likely to be caused by a bent or broken pin on the CRT video cable at the VGA connector, OR, this could also be caused by a damaged VGA connector on the back of the laptop.\015\012\015\012If neither VGA connector is at fault, the ... IBM E74 17" CRT Monitor

Monitor screen begins as computer is booting up and then screen goes black. Message says there is no signal.


If the power light dims or changes color after the no signal message comes up, that means the monitor went to sleep.While the monitor is plugged in and on and the computer is also on, Try unplugging the VGA cable from the monitor. wait 30 secon ... ViewSonic VG2230WM LCD Monitor

Bad connection between laptop and lcd projector


I am using an LCD projector Epson and keeps on breaking down. supplier will insist that PC is causing the damage. Is there a posbility that incomplete connections in the cabling will cause breakdown, missing grounding maybe in Hor-vert sync? Or can i ... Compaq Presario 2140US Notebook

Hello, My color isn't right on my computer. The box that pops up says "RGB no input signal". How can I fix this problem? Thanks Debbie


REMOVED THE 15 PIN PLUG - I GET A SCREEN MESSAGE - SYSTEM CABLE DISCONNECT! WHEN I PLUG IT BACK IN THE MESSAGE RGB NO INPUT SIGNAL\015\012APPEARS FOR A FEW SECONDS THEN THE MONITOR GOES INTO STANDBY AND THE\015\012SCREEN STAYS BLANK,\015\012 ... PC Desktops

My monitor gets no input signal, computer does


Try the montor on the external vga connection of the laptop. You can swap the signal from the laptop screen to the external monitor using the swap key (usually a FN key). You can do this whilst the laptop is up and running. If you see the display the ... Xerox XA7-17i 17" LCD Monitor

No input signal form a laptop to a projector


Hi jkoceng,What type of interface cable are you using to connect to the projector? 15-pin VGA? S-video?Generally on laptops if you look at the keyboard on the function keys (F1, F2, etc.) you'll see little icons such as adjust ... PC Desktops

I have connected my new laptop to the EPSON 1710 projector and it wont give me a signal. I have checked the basics (connected cables between laptop and projector, the lens cap is off powe is on. I have another laptop right next to it and when I put the plug into that laptop it works. do I need to configure something


You need to update your driver.\015\012if you wanna be sure about it just disable your all drivers on Laptop and try plugging in.\015\012thanks ... PC Desktops

I have a dell GX280 and I tried to connect it to a Olevia LCD TV but I have a problem to do so. I connect it via VGA cable. When I started the PC I could see TV display Windows logon and show PC is starting up. But then it turned to a blue screen with message 'A problem has been detected and windows has been shut down to prevent damage to your computer.'. and it continued to say that I needed to run a system diagnostic utility to check memory check etc. the technical information was 'Stop: 0x000


Lower you screen resoloution to 800x600 to start with. Also you must setup mutimonitor, correctly.\015\012\015\012\015\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it ... Dell OptiPlex GX280 PC Desktop

No sound is coming from my speakers when i connect my av lead and try to play the sound through my music centre i have installed nd uninstalled the realtek drivers so many times ...can ou please help me..


The most important question here is this: Does the sound work internally? I mean, does sound work on the laptop speakers, when no AV connection is made? If the answer is YES, then the rest of this applies to your situation,. otherwise, answer NO, and ... Acer Aspire 3680 Laptop

Projector Problem Good morning When I conect a notebook to the projector it shows a blue screen and the ''Not Supported'' message comes with a ''H:'' and ''V:'' values.Please, help me!


You need to make sure your laptop has detected the new projector. this message usually pops up when a device is unrecognized. you plug in all your cords then go to the desktop on your computer. you will need to add this as a clone display or extended ... HP PC Laptops

My laptop is used for presentations with a projector. For some reason the last time I used it the projector would not pick up the information from my laptop We tried unplugging starting again, checking all the plugs etc. I tried another laptop and it worked fine. Thank you


Sometimes you have to hold down the function key (usually labeled FN) and then press one of the F keys to get the laptop to send the signal to the projector. On my laptop its FN + F8. The key should have a picture of a monitor or say something like C ... PC Desktops

I AM TRYING TO TURN MY JVC TV INTO A MONITOR FORMY LAPTOP BUT I CANT SEEM TO GET THE RIGHT CHANNEL. I KNOW ITS NOTHING TO DO WITH MY LAPTOP SO ITS TO DO WITH THE T.V. I THINK I NEED SOME SORT OF CHANNEL TO PUT IT UP ON. THE JVC REMOTE MAKE IS CALLED RM-C55 BUT I DONT KNOW WHAT THE TV IS CALLED. PLEASE CAN U HELP


Hi dear\015\012Laptop Multimedia \015\012Ports Info \015\012\015\012\015\012\015\012 ... PC Desktops

Going to Sleep


Due to the power surge, it is highly possible that the monitor was given a boot by your computer on it's way out.\015\012\015\012This will short out a very small transistor inside the monitor on the video board and in turn, then monitor c ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Samsung GH19LS LCD Monitor wont display computer signals


You should have received two cables with the monitor. One is for VGA and plugs into you video card or computer board . The second one is for DVI digidal video and if you have that cable it plugs into the square connector. Then if you look into you ... Samsung SyncMaster 910MP 19" LCD Monitor

Hi. Love my projector. For some reason tonight, it wouldn't sync with my laptop for an important presentation. The cable works, because we used my cable (pin connector) to hook up the other projector. everything worked fine. The light comes on.. it just says...no signal...Any suggestions?


Have you toggled the output display function key on your laptop. Should look like a Square Screen and Laptop symbol. Plug in the projector and keep pressing this button. ... PC Desktops

HDMI from laptop to Mitsubishi TV worked once and stopped


I had this same problem. Took me a while but I figured it out. Right click on desktop and select "Personalize". Next click on "Display". You should see "connect to a projector" on the left. Select it then select duplicate. Its that simple. ... HP Pavilion dv7-1130us laptop

I've plugged in the monitor to my laptop. Yes, I have the correct cable plugged into the correct ports, and yes, they're plugged into power, and yes, I've pushed the button on the keyboard to transfer the image on the laptop screen to the monitor. However, when I turn on the monitor, it displays the message: "No signal input. Check video cable." and then goes to standby. This cable worked with another monitor a few minutes before, and I know I have it hooked up right, so what's going on? Is this


Hi,This is a Common problems with most of the Monitors. Try to wiggle with the Cable and see if that would help the situation. As you said, you have already checked Port, Cable and you are sure they are seated in a correct manner, it sou ... Hannspree HW191D LCD Monitor

RGB No Signal Message


First you need to check the cable at both ends, inside and out. Make sure it is plugged in, to the proper connector and that there aren't any bents pins. Now put this monitor on another computer, a laptop will do. Does it come on now? If so then ... Gateway FPD1975W 19" LCD Monitor

Need to change resolution but cannot get onto desktop to do so as the monitor just goes to sleep


Plug it into your laptop and change the settings to the monitor to 800 by 600 pixels, then change the refresh rate to 60 hz or you could change it to 1280 by 1024 pixels and 60hz but it should work with 800 by 600 too, then plug it back into your des ... HP L1706 17" LCD Monitor

Acer Aspire 9303, the screen remains black and 3 beep signals


I have this problem 2 days ago.. and this works on me... maybe on your's tooyou may need to flash your bios. why need to flash the bios.. ? 1. had the black screen of death. or deleted the bioshow to flash the bios ... Acer Aspire 9300 Notebook

Cannot connect to my home network but can connect to others


Open your d-link software and click on repair...that will release and refresh your network connection.If you are using Microsoft for connecting, right click one the icon bottom right, and also click repair.And one more thing to try should ... Dell Inspiron 6400 Notebook

Can not get video out to an epson powerlite projector


Check if windows recognizes the projector or not. if it doesnt recognize it then you'll have to try the add hardware app and let Plug and play do its thing. ... HP Pavilion ze2000 Notebook
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7674 seconds