Having problems with your HP Pavilion Slimline S3123W Desktop PC - REFURBISHED ?
Slimline if on, but won't boot up and there is no signal being output to the monitor
HP had a lot of problems with these PCs, the video card is on-board and seems to be failing a lot. They even had a recall on these, but unless it is still under warranty you are out of luck. I am currently working on one right now that has the same problem. I installed a low profile ATI 4600XT video card and still nothing. I went into the BIOS and somehow navigate to the right spot to tell the PC not to use the on-board, but instead use the PCIe. It was a real pain when the screen is having a sync problem and everything looks funky. But even after that it still tries to boot using the defective on-board. Hope this helps.
They reseating or replacing the RAM (memory)
Repair Help & Product Troubleshooting for HP Pavilion Slimline S3123W Desktop PC - REFURBISHED
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
New video card wont work, acer monitor no signal
Ok the IGFX is the on motherboard video you will need to set the cmos to clear the setting you did or move the video cable to the motherboard output.after you have used the bios to switch back to the AGP you can start widows in safe mode to acc ... Acer X193W LCD Monitor
Power outage,monitor wont power up,hope its not fried
I may or may not make your day. (But I wish you to know that I want to! lol!)I believe it's not your monitor, I believe it's your computer. (Oh, that helped, huh!) However, don't freak out yet, it maybe a simple fix.Let's test ... Gateway FPD2275W LCD Monitor
Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.
This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor
The computer wont boot up. and the screen wont display anything!
Take a multimeter and verify the AC adapter. If it is ok, remove the battery. When you push the power on button do you have any activity ? If there is no activity the motherboard is defective. If you have some activity (leds on, fan activity etc.) : ... Dell XPS M1210 Notebook
Acer Aspire 5100
This machine has the video card integrated into the main board, so the lose card idea is out the window. However you can check to see if the connection to the display is good by removing the button panel near the display. To remove the button panel: ... Acer Aspire 5100 Notebook
"No signal detected" when LCD connected with DVI-D Cable
Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor
Massive series of problems with IBM Thinkpad
Probably itz either minor case of software corruption/improper ground/cpu fan..or major case of faulty or defective main board/ram/addon/daughter cards....plz do check the following as in order:..the Hardwa ... IBM ThinkPad R40 2897 Notebook
Monitor says "Check signal Cable"
Lilsidetrack -An obvious cause is that your video card may have taken a dive on you, and it needs to be replaced. If you don't "see" anything on boot up, but what you hear sounds like it's booting, your video card has probably gone bad. ... Samsung SyncMaster 2233BW 22" LCD Monitor
Hello, I have a Gateway model GT5662, stock setup - Will not boot
Usually, if it's a motherboard that has a failed component on it, you will see failed Electrolytic Capacitors. The small aluminum 'Cans' on the motherboard.Note*The Electrolytic Capacitors that surround the Processor, should have sp ... Gateway GT5662 Desktop PC
My tower wont turn off and monitor says no input signal and keyboard doesnt work
Do you have two video outputs on your PC ie. one on the motherboard adn a separately installed card maybe? If you do you need to set the BIOS so that it uses the AGP/PCIE video card and not the 'onboard'. Try the onbopard vodeo card first to see if y ... HP Pavilion a1610n PC Desktop
Pc wont read monitor
If you look at the monitor there will be an led light on the front that is always orange or yellow when the computer is off but still connected to the monitor. This led will turn green when the computer boots up, sometimes even showing a "no signal" ... HP PAVILION A6230N DESKTOP PC
Viewsonic VX2233WM LCD DVI issue
... ViewSonic VX2235wm LCD Monitor
Mag monitor doesn't display bios post
The BIOS is sending the display information to the monitor but, when you turn your PC on, the LCD will be sleeping and it will take 1~2 seconds to wake up when receiving the display signal. The monitor is working and even if the BIOS messages aren't ... Computer Monitors
Problem with the monitor
Hi,The three boxes represent the built-in diagnostics of the monitor. The letters G is green, B is blue and R is for red, the 3 color guns of the picture tube of your monitor. The words "Self Test" indicates that it is in diagnostic mode ... Compaq FS7550 17" CRT Monitor
A mind of its own
Check the cmos battery and the power suply. lok for swollen compassitors ... PC Desktops
My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.
Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor
Monitor goes to sleep when booting up
Boot into your BIOS usually del or the f2 key, check what your setting is for your video output, it is more than likely outputting the video through the onboard video and not to your video card. ... HP PC Desktops
Power light flashes but monitor wont turn on
Your monitor is not receiving a signal from the computer. \015\012\015\012First try the monitor on another computer and/or try a different monitor on this computer. If the monitor continues to have a problem, then either replace it or ha ... Gateway FPD1975W 19" LCD Monitor
DELL INSPIRON 1501 won't BOOT...and LEDs flashing
Hi..This is an Hardware Failures: Doesn't Boot Up.First of all, most of the\015\012hardware failures that are going to be presented in this article\015\012require you to disassemble the l ... Dell InspironTM 1501 Notebook
It wont power on. The power light comes on but
Try these troubleshooting tips, they may help.\015\012\015\012Power is on, but nobody is home….\015\012\015\012This is a common problem I see a lot and there can be multiple problems here. First off, if you have lost th ... Toshiba Satellite L45-S7423 Notebook
Computer "turns on" i hear four to five beeps, but the monitor gets no signal. a friend gave me the computer, only once did i see it boot up fully but it froze up so i had to restart it and it wont work. everytime i try i get the same thing four or five beeps and monitor says no signal. so i dont know whats happening. its a gateway computer runing windows xp. thats all i know. i know the monitor is good cause i tested it on another computer.
Without knowing the exact frequency/length of the beeps my first guess would be a bad stick of ram or a bad video card. If there is more than one stick of ram in the computer try it with one of the sticks pulled, pulling each stick until it does boo ... Gateway GT5028 PC Desktop
Monitor displays no signal as soon as i boot into win xp
You may have to put the laptop in presenter mode, which tells it to use the attached monitor. There is supposed to be a key on the laptop which does this, its normally the FN key with CRT/LCD (F8). You can also do it via screen properti ... BenQ FP567s 15" LCD Monitor
I'm having problem with my 16 inch CHIMEI LCD monitor flat screen, first when i booted up my computer it was fine, then i just defrozted my computer(because my computer has a deep freeze program)and then restarted it, when it was restarting THE NO INPUT SIGNAL APPEARED and the light on the monitor turn to orange, i tried restarting the pc but its the same, i check the cables and still the NO SIGNAL input wont go, and my monitor wont wake up.. NEED HELP PLS.. thanks..
In my opion deep freeze (pige head)is not good progrram .itt creat big problem. we should know well how can be use it. once a time u should reinstale it or formate ur computer,i hae facing many problem from my custmer. -----thanks\015 ... Chi Mei Corporation 221A Monitor
No analog signal
Sounds like the graphics card is gone belly up. Try the monitor with another pc or just replace the graphics card.Hope this helps ... ViewSonic VX2235WM Monitor
Dell computer monitor wont come on when I turn
When you turn on most dell monitors they come on with a yellow light, then turn green when the monitor and video source synch. If your light is not turning from yellow to green, your monitor is either dead or not getting a signal from the video sour ... PC Desktops