Having problems with your HP Pavilion s3020n (882780985063) PC Desktop ?

No input signal go to power save

\015 PAVILION S3020N\015\012\015\012HI\015\012I LIVE IN MEXICO AND I BOUGHT MY COMPUTER ON MY TRIP TO US A YEAR AGO. IT WAS WORKING PROPERLY UNTIL IT STARTED DISPLAYING THIS MESSAGE : no input signal go to power save. I TRIED A DIFFERENT MONITOR AND IT HAPPEND THE SAME. I EVEN TOOK THE RAM OUT, CLEANED AND PUT IT BACK, BUT IT DIDN\302\264T WORK. I WAS TOLD BY A COMPUTER TECHNICIAN THAT IT WAS THE VIDEO CARD BUT IN MEXICO IT IS DIFFICULT TO GET THIS KIND OF HARWARE BECAUSE THE PARTS FOR THIS COMPUTER ARE SMALLER, AND THERE ARE NOT IN THE MARKET(IN MEXICO) YET. SO I AM GOING TO ORDER IT BY THE INTERNET IN A US STORE. NOW, I NEED HELP TO FIND OUT WHAT KIND OF VIDEO CARD MY COMPUTER NEEDS, BECAUSE I\302\264VE HEARD ABOUT 128MB OR 256MB, AGP OR PCI (EXPRESS), AND IF IT REALLY IMPORTANT THE BRAND. SO, HOW DO I ORDER IT. THANKS.\015

Answers :

This is a knowen problem for this model see the following link to see if you qualify for a limited warranty that expires December 31, 2009.
\015\012
\015\012http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&dlc=en&cc=us&lang=en&docname=c01514044&product=3376325&printable=no&encodeUrl=true
Well, you have one of the Slimline models, and there isn't any room for a standard sized Video Card, as well as the power supply probably couldn't handle a standard video card.
\015\012
\015\012The motherboard for this computer has 2 expansion slots. The expansion slot for the graphics card is PCI Express.
\015\012Here's a link to the motherboards specifications: http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=c00910076&dlc=en
\015\012
\015\012You will need a Low Profile Video Card. Here's a listing of some low profile cards from this US online ordering website, newegg.com (they are a pretty good place) http://www.newegg.com/Product/ProductList.aspx?Submit=ENE&DEPA=0&Order=BESTMATCH&Description=low+profile+video+card. This is probably what you need, and I was expecting a much more expensive price tag on one of these cards considering they are harder to find.
\015\012
\015\012What do you use your computer for? Work, or do you play video games? If you play higher graphic programs, get one of the 256MB cards for sure. You may want to go with 256 anyways, but if you only use the computer for internet and work/school, 128MB is sufficient.
Repair Help & Product Troubleshooting for HP Pavilion s3020n (882780985063) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

The screen will not come up but gave this message 'No input signal, go to power save


To isolate the problem, you need a friend with another computer since right now, we don't really know if the video section (or card) of the PC is at fault or the monitor.\015\012\015\012You need to swap displays with someone so you can be certa ... Sony DELUXEPRO SDM-X82 18.1" LCD Monitor

I turn on the desktop and the monitor only says no input signal input2: HD15 go to power save what do i do?


Hi jiheeahn! I wiull be glad to assist you. lets isolate the issue. The reason why the monitor says no signal input2: hd15 got to power save. the connection from the monitor to the desktop computer is disconnected or its not connected to the right in ... Sony SDM-HS73P 17" LCD Monitor

Sony Monitor says "No Input Signal, switch to Power Save"


Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

LG 2542T goes dark after showing "analog power saving mode" message


If it is saying analog signal power saving... I am wondering do you have it hooked into you computer with the white DVI cable?Is there an option on your monitor to switch modes? Analog-Digital? If you are using the white DVI cable to hoo ... LG L1717S-BN 17" LCD Monitor

Upgraded RAM, Now CPU Says "No Input Signal. Go To Power Save."


I would check the documentation to ensure you purchase the correct memory. If you purchase the wrong memory type, it could cause issues like these. ... PC Desktops

No input signal go to power save


This is a knowen problem for this model see the following link to see if you qualify for a limited warranty that expires December 31, 2009.\015\012\015\012 ... HP Pavilion s3020n (882780985063) PC Desktop

Got BSOD on my XP computer and have traced it, I think, to the video card - getting "no input signal - going to power save". Would this prevent to computer from loading or going into safe mode?


Yes, a bad video card could prevent the computer from starting at all. Your monitor is going into power save mode because the computer isn't sending a video signal. This could be due to many things, power supply, memory, video card, processor. Try ... ASUS PC Desktops

Monitor screen stuck at input not supportedhow do I go back ?


Assuming you have not changed the connection to your monitor (from VGA to DVI signal, for example), or that you have not messed around with the display settings, further below may be the situation. Else, you need to access your LCD menu and choose t ... HP Computer Monitors

Dell E171FP Monitor goes black after 2 secs


Hi, I don't think the problem is with your monitor. Your monitor sounds like it's doing exactly what it's supposed to do. The monitor is supposed to turn off if there's no cable attached, which means there's no signal input. When the screen goes b ... Dell E171FP 17" Flat Panel LCD Monitor

When I turn boot up my gt5220 the monitor briefly flashes and then goes into power saving mode- desktop stays on, fans running and all, until turned off by holding power button down or unplugging it.... my gateway 820GM started doing the same thing, monitor just going into power saving mode.... but the monitor is fine, works on a dell desktop, and the dell monitor works on my gateway- so does an older EV700 monitor....WTF??? video card? motherboard? driver update? power source? heard 15 differen


In this case if you monitor say no input or no signal it means the\015\012monitor connector cord are not connected properly to the motherboard.\015\012Or if you have a video card you need to plug your monitor connector to\015\012the video card. Becau ... Gateway GT5220 PC Desktop

When the PC starts the monitor does not come out of the power standby mode


Hi The problem is to do with a 680uf capacitor that tends to bulge and fails.this stops the monitor staying on when trigerd to do so,change this and happy day. ... LG Flatron L1715S 17" LCD Monitor

My computer is an Acer Aspire ASE-360-U-A3503 desktop computer and I still cannot get the power up button to shut off no matter how long i press on it. Then the monitor cable connector on the CPU is not giving out to the connector from the monitor. It keeps flashing cable not connected when the two aren't together, and when i plug them together, it says no signal. Could you please tell me what is wrong i can't take it anymore


You seem to have two problems here: The power button and the video connection.\015\012It should take 4 seconds of continuously holding the power button in for the PC to shut off, unless the settings under Power Saving say that doing this actio ... Acer Aspire E360 PC Desktop

No signal input, please check video signal


... SVA-USA VR 17S 17" Flat Panel LCD Monitor

Black screen with message about no input signal


Might be something wrong with your monitor's data cable ... Sony SDM-HS95P/B 19" LCD Monitor

My monitor power on then cut off what can i do


Hi there,I had the same problem with the exact same model of Gateway 19" LCD. Likely this is the same issue you're experiencing, and I hope you're able enough with a multi-meter and soldering iron to fix this issue, or willing enough to tear t ... Gateway FPD1960 19" Flat Panel LCD Monitor

Problem Using stand alone monitor with laptop computer


It could just be in the power saving mode. if it is its easy to fix. just go to the notebook mobile settings or battery settings and change the screen brightness or mabey you have a screen brightness changer on your keyboard? ... Dell Inspiron 8600 Notebook

My Dell monitor is stuck in Power Save Mode. Any


The monitor is not receiving signal from the computer. Verify the computer is on and the monitor input is set to the correct mode or auto. Try another monitor if possible. ... Computer Monitors

My son has an LG monitor - that is hooked up to his xbox ..... & all of a sudden - since yesterday - it keeps going/staying in this 'power save' mode. what do I do?... I've tried to unplug/replug, etc .... ,tiina.


I've done quite a bit of research on this and the problem is with the LG monitor. For some reason the DVI and HDMI ports have a history of going bad and when this happens, the monitor goes into "power save" mode because it thinks that there is no si ... Computer Monitors

Mitsubishi xc-3716c monitor


Model (XC-3716C)Manufacturer's product descriptionMitsubishi represents the pinnacle in technological achievement for multi-person viewing of workstation generated, high resolution imagery such as CAD/CAM/CAE or scientific visualiza ... Computer Monitors

Computer monitor comes on for 1 seconds, flashes "analog power save mode" and then goes black.


Most monitors will say "Power save mode" when they can tell through residual voltage that the signal lead is plugged into a machine, but there's no picture being transmitted. The four states of a monitor are:* Off entirely.* Switch ... PC Desktops

Power light steady green but monitor goes dark after 4 secs of video


... NEC MultiSync LCD1770V - Flat panel display - TFT - 17" - 1280 x 1024 / 75 Hz - 0.264 mm - VGA (... Monitor

Hp w2207h screen in blank but flashlight shows icons are


The power supply-inverter board is probably at fault. Remove the back cover and locate the standard ac power cord connector. The board that the power input connector is soldered to is your power supply - inverter board. Check the electrolytic capa ... HP Computer Monitors

Directions for setup tascam 1641 audio interface, with g5 os 10.5.6 processor name: PowerPC 970 (2.2)


Hi Dear we are provide some of the link for "TASCAM 1641 AUDIO INTERFACE "\015\012\015\012\015\012http://www.tascam.com/details;9,15, ... PC Desktops

Monitor not seeming to work when computer is powered up.


Hi there! Try reseatting the video card and clean the video card if needed and the memory module. ... Computer Monitors
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.4788 seconds