Having problems with your HP Pavilion A6010N (882780985575) PC Desktop ?

Installed new video card but the signal remains black

\015 The on board card developed a problem and could not detect the monitor settings, installed nvidia gforce 7300 but there is no signal to the monitor, i have tried flashing the bios but it didn't work\015

Answers :

REMOVE THE CARD AND UNINSTALL THE VIDEO CARD IN ADD REMOVE PROGRAMS. THEN REMOVE VIDEO CARD AND INSTALL DRIVERS THEN INSTALL YOUR VIDEO CARD. I HAVE THIS SAME VIDEO CARD AND HAD THE SAME PROBLEM.THIS WAS THE ONLY WAY I COULD GET IT TO WORK. ALSO YOU NEED TO DISABLE THE VIDEO CARD THAT IS ON YOUR MOTHERBOARD. YOU CAN DO THIS IN CONTROL PANEL. ADMINASTRATIVE TOOLS THEN CLICK COMPUTER MANAGEMENT THEN CLICK DEVICE MANAGER GO TO YOUR DISPLAY DRIVERS AND DISABLE YOUR GRAPHICS CONTROLER. THAT SHOULD DO IT. HAPPY NEW YEAR.
Repair Help & Product Troubleshooting for HP Pavilion A6010N (882780985575) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Installed new video card but the signal remains black


REMOVE THE CARD AND UNINSTALL THE VIDEO CARD IN ADD REMOVE PROGRAMS. THEN REMOVE VIDEO CARD AND INSTALL DRIVERS THEN INSTALL YOUR VIDEO CARD. I HAVE THIS SAME VIDEO CARD AND HAD THE SAME PROBLEM.THIS WAS THE ONLY WAY I COULD GET IT TO WORK. ALSO YOU ... HP Pavilion A6010N (882780985575) PC Desktop

Gibberish + won't finish loading Windows


Remove the new memory first. if that does not help you may have some a virus, indicated by safe mode workng fine. One other thing i found would do that is a damaged Hard drive, not to likely here because safe mode works. ... Dell Dimension E521 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor and memory


I normally ask for more information when people post problems but I can't even be bothered to go through all this driver to get to the root of your problem. Cut out the c**p and give the necessary.\015\012\015\012As a former tech, you should know wha ... Compaq Presario 5000 PC Desktop

COMPAQ SPS-BD 1394 Motherboard - replacing microprocessor / cannibalizing into a Compaq Presario S5010NX, Prod. # DN032A-ABA, with a 2.5GHz Celeron w/ virtual memory problem. Details below


Hi dearwhy not make aconnection with another pc to other pc with crossing cable, you can sharing anything there, file ,printer...and allokecropp ... Compaq Presario 5000 PC Desktop

LG StudioWorks 700s Monitor NO SIGNAL


First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

Black screen with AGP video card update


You really didn't need a new psu for that videocard, but it can either be a burned videocard or the monitor can't support the refresh rate the videocard is outputting.  although, the card really should default to its lowest setting upon installi ... Dell OptiPlex GX260 PC Desktop

Fan comes on but monitor says no signal the screen stays black and the fan keeps running won't turn off by button have to unplug it for it to go off


I assume you are hearing the power supply and maybe the CPU fan. If you can see what you are doing, then I wouldn't expect you to be able to turn off the computer any other way than doing a hard shutdown. I would not have bought a new monitor, ... eMachines T6420 PC Desktop

Blank screen after boot up


This issue may occur if one of the following conditions is true: \015\012Cause 1\015\012\015\012 loadTOCNode(3, 'cause');\015\012 \015\012This issue may occur if you have a CD, a DVD or a floppy disk in your CD, DVD, or floppy drive ... Dell Dimension 3000 PC Desktop

No Signal and BIOS troubles - new video card


Try using the onboard graphics instead and remove the graphics card. then uninstall all the graphics card drivers and software and reinstall again. make sure you install 32bit or 64bit depending on what your operating system is. you can find out if i ... Acer X193W LCD Monitor

Acer 22 in monitor


From what you say, I'll assume you see stuff on the monitor like the BIOS info,and the Windows splash screen. Then it goes black.This happens when Windows loads the video drivers for your video card. Up until that point, you are using generic ... Acer Computer Monitors

StudioWorks 700s Monitor No Signal


It could be that the resolution settings that you had with the old monitor are not compatible with the new monitor. Try hooking up your old monitor and either lowering or highering the resolution and see if that corrects the problem. Can you give ... Proview PL926WBi 19" LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

No display (black) - power light is amber color


The video signal is not reaching your monitor, check the pins on the connector from the monitor to the computer, then check the video card: \015\012\015\012Turn off your computer, unplg the power, and then take out the video card. Wait ... ViewSonic VX910 19" LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


1 Take the monitor out to the street \015\0122 Raise above head \015\0123 Hurl it twards the ground\015\0124 Release \015\0125 Watch peices fly everywhere \015\0126 ... Acer AL1916W 19" LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


This Problem is Acer(s) Monitors. Though it is a nuisance one fix That has work for many is the Unplugging after it goes back to Good (viewable) screen. I have hooked mine up to an inexpensive Power strip to make it easier for me and just turn ... Acer X241Wsd Monitor

New HDD Install Prob


Basic Troubleshooting Tips after Installing a New Hard DriveBased on Seagate IDE hard drives.If you have installed your drive and it does not function properly, perform the following basic checks:Additional Troubleshooting Tip ... PC Desktops

Dell 1600SC Server - trying to install a video card


Try repeatadely pressing delete on startup with the monitor cable attached to your onboard graphics socket but keep the new graphics card in. then you should go into the bios. change the graphics setting to your graphics car and then save and reboot. ... Dell PowerEdge 1600SC Server

Faulty motherboard? Hi, my PC has an ansus p5vd2-mx motherboard, intel duo core processor, pci express slot, gforce graphic card. I upgraded the graphics card for faster secondhand one which resulted in loss of video signal and 1 long and 2 short beebs from the BIOS ( faulty graphic card? ) Replaced the original graphic card but still getting the same error beebs and no video signal. The fan on the graphic card is still working so it must be drawing power from the pci express slot. My question i


Bullnosestep\015\012\015\012\015\012It is possible that the new (secondhand graphics card) was faulty and sent an incorrect voltage to part of your motherboard (frying it). However in my experiance it is not likely, I have installed ... PC Desktops

No display from VGA adapter.


The graphics card won't initialize unless the system passes certain internal checks; most of the time this is caused by the wrong RAM configuration. Make sure the RAM you are using is the right type of RAM for your system; in some cases the system bo ... E-Machines eView 15s Monitor

Installed a new Optical Drive and require assistance in the wiring


What kind of optical drive? Is this a CD, DVD?, Blue ray,or an opto-ferro-magnetic floppy?Generally:1) External drive: ============ a) just power it up and connect it to the PC using an USB or ... PC Desktops

Ma acer aspire 5738z does not start at all. the power on led nd the on/off buton light glows but the scree remains black. when i last left the comp i put it to sleep nd it went 2 sleep after installing new updates. now it doesnt respond after 5 hrs.only led light of power nd on off switch shows up..wat 2 do?


When you plug the DC power adapter and press on the power button, the laptop starts making normal noises, the LEDs work properly but noting appears on the screen. The laptop will not start.\015\012First of all, take a ... Acer Aspire 5735 Notebook

Screen goes blank when I move the mouse


Did it work properly using a VGA (analog) cable? If so, check your DVI (digital) cable against the pictures at the bottom of http://www.datapro.net/techinfo/dvi_i ... Samsung SyncMaster 204B 20.1" LCD Monitor

Acer al1922 monitor no signal:


If it does the same with other PC then you need to open it up and first thing to look for are bad caps in the power supply, see example of failed monitors due to bad caps, transistors, transformers, lamps: ... Acer AL1916W 19" LCD Monitor

Computer freezes up after install of drivers for new video card..


It usually in BIOS it says, "PCI,PCIe,AGP. And there wasn't a 512 mb videos card size either? Something isn't right. Its like your better to have the software installed before you add the hardware and then reinstall the software. Plus, I have a video ... PC Desktops

Desktop monitor port not working. processor, keyboard, mouse all powered on & working, you can hear it boot up. I use this with other computers, it works fine. monitor has power but goes to sleep. Is there another way to connect monitor with a different adapter, as usb port or to serial port?


Ha, no kidding! I just had a HP Pavilion a705w come in for repair at my shop!Small world.Okay, let's go with your theory that the power supply is okay, and the Processor is indeed operating.Your theory is that the ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.1192 seconds