Having problems with your HP Pavilion a305w (DM181AR) PC Desktop ?

Message usb powersurge

\015 Last night the computer showed usb powersurge. the computer froze we had to unplug and went to restart. there is power to the tower, however the monitor starts with a green light then right to a yello one. nothing comes up on the monitor at all, it is pure black.\015\012any help will be greatly appreciated\015\012\015\012My computer showed an error message (power surge usb port) then my computer froze, I noticed all the usb ports was turned off when I went to move the mouse.So I restarted the computer it makes these beeping noises then goes just long beep and never stops,also the screen loads up to the point where it says press f1 for setup. but my keyboard cannot recieve powerWhat should I do??? \015

Answers :

Beep codes instructions:
\015\012http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us&docname=bph07107&dlc=en&product=362754
\015\012Please remember to rate all users who assist you for free :)
\015\012
Repair Help & Product Troubleshooting for HP Pavilion a305w (DM181AR) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Message usb powersurge


Beep codes instructions:\015\012http://h10025.www1.hp.com/ewfrf/wc/document?lc=en&cc=us ... HP Pavilion a305w (DM181AR) PC Desktop

Message usb powersurge


I had the same problem. I heard a sparking noise, then that message popped up and the computer froze. I havent been able to get it working since then. When i plug in the power source (everything else is unplugged) the power light in front as well as ... Compaq Presario 5BW284 (202493-003) PC Desktop

Powersurge on USB ports


Have a close look at the USB ports, make sure you don't have any bent contacts touching the outer part of the connector and shorting. ... Dell Latitude D410 Notebook

Power Surge error message


Hello, \015\012\015\012 \015\012\015\012 \015\012\015\012I guess that this could be your error message:\015\012\015\012"Error message when you wake up a Windows XP-based computer from hibernation or from stand ... IBM ThinkPad T43 Notebook

Desktop monitor monitor doesn't turn on.


My boys were on the computer last night and they had a message usb powersurge, computer froze we had to unplug it and now monitor seems to be on sleep mode. power is still showing through tower, but the green light turns to yellow on the monitor. Any ... Compaq Presario 5BW284 (202493-003) PC Desktop

How do I get started using a USB flash drive and how do I set up a security system?


\015\012hey, heres something that would help u: \015\012Copying files to a flash drive on a PC:\015\012\015\012Open My Computer and see which drives are shown. Most computers, for e ... PC Desktops

How do i have a usb port run a high speed device


The USB port in your computer is not the new high-speed USB 2.0 version, and when you plug a USB 2.0 device in you will get that message. Most USB devices will still work but not give best performance. Just close the message window.The ne ... Compaq Presario 700 470024-192 Notebook

This usb device can perform faster if you connect it to a hi speed usb 2.0 port. I have an hp pivilion dv 6000, and according to the specs, I have usb 2.0, but I get this message every time I plug my flash drive in. Why?


This is just an error message. Yes, your HP Pavillion has USB 2.0, but there's a possibility that your USB flash drive has USB 1.1 specs. If the flash drive has USB 1.1 specs, you would still get the same message. Again, this is just a me ... HP Pavilion dv6000z Notebook

Windows XP: Blue Screen of Death


Hi my suggest is do not put the usb before u start ur computer on ... Dell INSPIRON 6000 CENTRINO 1.7GHZ,512mb,40GB,DVDRW,XP (086216118098) PC Notebook

Power surge on hub port


Try this to find out which one of your components has an issue. Turn off your machine then unplug all of your USB cables. Turn your machine back on and plug in one of your USB cables. Verify the component you just plugged in works correctly and if it ... Dell Dimension 4700C PC Desktop

USB ports work at 1.1; s/b 2.0


Your computer is functioning correctly.\015\012The USB ports on your laptop are USB1 ports its pard of the hardware.\015\012Your PCMCIA USB 2 card runs at USB 2 speed and therefore when you connect a USB 2 device to this port you will not ... Lenovo ThinkPad R51e Notebook

A-hi speed usb device is plugged into a non-high spped usb hub


Hello Vikask\015\012Happy Holidays\015\012Depending on your PC arquitecture, year etc, sometimes, this message can be seen from different ways, 1) you have a 1.0 USB ports, that Not support 2.0 devices, like 2.0 complaint flash drives. 2) ... PC Desktops

Missing NTLDR file


The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

My usb port is not 2 - I keep getting a message that states that I need to get a hi speed usb device host controller. Where can I get this? I have an ibm thinkpad r40.


On some laptops that are older (an IBM R40 is a bit older) there are no high speed usb ports but if you plug in a usb device that is USB 2.0 into a usb port that is not high speed, the operating system (Sounds like Windows XP) will display that messa ... IBM ThinkPad R40 2722 Notebook

Pop up message says that I have a USB device that is not recogniz


Will I think you plug or installed a usb bluetooth device. Or usb soundcard, or infrared device. But commonly its a usb bluetooth device. Will to get in stop. Try to uncheck it in startup on msconfig. Or run the software for it and set it ... Toshiba Satellite 5005-S504 Notebook

Computer error problem


Http://www.fixya.com/PostAnswer.aspx?thid=2692939drea_mike67 on Jul 31, 2009a message saying windows-no dis exception processing message c0000013 parameters 75b6bf9c 4 75b6bf9c 75b6bf9c then it says cancel try agin contunue and i push one ... HP PC Desktops

Usb does not recognise external hard drive


Your drive is being recognized. However, your computer only has USB 1.1 so you are being notified that USB 2.0 is faster. This message is FYI and will not prevent you from accessing the drive.\015\012\015\012After you see that message y ... Toshiba Tecra 8200 Notebook

Usb ports not recognized


Did this suddenly start to occur? Were they working before? If so, it is very simple - shut down computer, remove the battery and unplug any power source, wait a couple of minutes and reassemble and power up. Wala! I read all kinds of complicated in ... PC Laptops

I plugged my Memorex TravelDrive into my computer. It has always worked perfectly. This time I got the message that the USB device was not recognized and I can't get into my files.


THE FOLLOWING IS COURTESY OF MICROSOFT Help and Support \015\012\015\012When you plug a USB device into a Windows XP-based computer immediately after the computer comes out of standby (S3) or hibernate (S4), the computer may not recogniz ... PC Desktops

CL51-15 USB Port Problem


I was hoping you can help me out guys, i have this laptop acer travelmate 290 and everything seem to be working properly. All the drivers and devices are installed and working fine(Audio, Display, Network, Wireless, PCMCIA......) except my 2 USB port ... ASI CL51-15 Notebook

I'm trying to plug in my digital camara into my USB port, & then a message saying ''Power Surge On Hub Port'' comes up, & i cannot upload pictures/videos off of my camara. How do i get that message to stop popping up, & so that i can upload pictures/videos off of my digital camara? Do i need to delete some Big websites i use that take up a lot of the computer's memory?, Like iTunes, or instant messaging? HELP!


If you are plugging it into a USB hub, try plugging directly into the computer usb ports.If not you may want to try unplugging all other usb devices and see if it works then. If so you will probably need to purchase a PCI USB controller c ... eMachines E17T4W 17" Monitor

Ntldr is missing, this information is regularly coming even though I am trying to format my laptop acer 4715z with cd also when once it was it catched booting and started the process of formating after a few steps ahead it showed me that no hardware is available , kindly tell me what to do? now it is not booting with the cd which button or setting is required to solve the problem and able to format my laptop


1. You must have a copy of "ntldrusb.zip" file.USB: Right click the ntldrusb.zip file and choose "Extract All" Next>Next>FinishThen Insert your USB Stick into the working computer (remove any other USB sticks, and be sure there isn't anyt ... Acer Aspire 5610-4648 Notebook

Maxtor one touch 4 mini- not connected! The single USB cable is in the Computer USB port.So far so good. When the second USB connector-with 2 cables is inserted to another Computer’s USB Port I start getting messages: USB device not recognized, one of the USB devices attached to this computer has malfunctioned……… To sume it up: connecting on it's own the single cable is O.K. Connecting the double cable on it's own gives the message. - The point is Maxtor is not connected yet, only the cables. C


Quite strange.. I would suggest that maybe one of the usb ports is faulty.. Or ofcourse, one of the cables.. Or the usb port has been mis-wired inside the pc. That has been done before. Anyway, do you have access to 2 usb drives.. I mean micro/thumb ... PC Desktops

No high speed usb port


Hi Delvin!\015\012\015\012The 2 usb-ports on the front and the 3 back of your Dell is high speed ones, at least the manual says so, they are all USB 2.0.If you cant get them work properly with the 2.0 usb speed, you can buy an high ... Dell Dimension 1100 PC Desktop

USB ports not working, slow computer


The error you are getting is the USB port driver. I suggest disconnecting ALL of the items you have connected to ALL of the USB ports and rebooting. If the computer reboots normally, go back and install ONE and ONLY one USB device. Restart your mac ... HP Pavilion a1210n (ED895AA) PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3052 seconds