Having problems with your HP Pavilion a305w (DM181AR) PC Desktop ?

CPU START BUT NO SIGNAL ON MONITOR

\015 I hv removed both the RAM. no beep sound.but swapping both the ram the monitor shows the signl...why?...\015

Answers :

It could be your ram edge connector is dirty, clean it with soft eraser.
Repair Help & Product Troubleshooting for HP Pavilion a305w (DM181AR) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

PC STARTS BUT NO VIDEO SIGNAL IS PRESENT AT THE MONITOR


I was wondering if this person helped you ... Gateway 310 S PC Desktop

I get nothing on the monitor when it starts up!!!!


I assume you have had the side panel off to watch the cpu fan spin up? if it does spin up and you get no bios beeps, then the fault is with the motherboard or CPU, most probably the motherboard. Problem sounds like capacitors blown or leaking ( have ... HP Compaq Presario SR2170NX (RK549AA#ABA) PC Desktop

My tower had a virus/trojan horse AND IT DOES NOT START OR REBOOT


Too complicated when I read your post. Why not take it easy, and sort your problem step by step. Ok you said you have a virus or trojan. Why not try other free antivirus? Try to use Avira free with malwarebytes antimalware in combo. Its lite and a ki ... PC Desktops

Motherboard failure Hi I have been told that my motherboard in my Compaq Presario , which is 2 .5 yrs old and has not been used for 1 year , has failed. Can someone please tell me how a motherboard can fail. I bought a new monitor and plugged it into the PC and I got "No Signal" on the screen for a few seconds before it went blank. The monitor is OK on my other PC. I have been quoted 400 AUD / 600 USD for a new motherboard. Is this a reasonable cost? Thanks


Failure of motherboards is usually due to breaking capacitors. A few years ago a capacitor company stole the "recipe" for making capacitors from another company and tried to make their own, unfortunately they did not get the ingredients right and the ... Compaq PRESARIO SR1475CL AMD Athlon 64 3400+ 2.40GHz, 512MB DDRAM, 200GB Hard Drive, LightScribe DL ... (PW711AA) PC Desktop

Monitor going to sleep


This type of message only comes when your cpu is not working. \015\012Because if it is moitor's problem nothing or some blurd, not proper image will be appeared on the screen, but if any monitor is saying that you have the problem with your CP ... Dell Dimension 3000 PC Desktop

Sony Monitor says "No Input Signal, switch to Power Save"


Hi. there has been a surge that has tripped the surge protector. this surge may have destroyed the mother board , in return, rendering the ICs dormant. you can test this theory but unplugging the CPU and moniter from this blown surge protector and pl ... Sony SDM-HS75/B 17" LCD Monitor

L1932TQ Fails on Desktop, works on Notebook


It simply means that your cpu is not giving back signal to your monitor to process, in fact, it is a cpu problem that is why there is nothing to display in your monitor.Your cpu froze because of that usb thing. the only way to unfreeze it ... LG L1932TQ LCD Monitor

Monitor falls asleep during/after startup


... HP Computer Monitors

Acer AM5641-U5520A will not


If you removed the memory modules and there is no change then I would start disconnecting one device at a time to see if that is causing the problem. Start by disconnecting the cd/dvd rom and then try booting the computer. Then try disconnecting any ... Acer AM5641-B5560A Desktop PC & Monitor BUNDLE

My monitor gets switched off when i connect to cpu,the moment i disconnect it from cpu,its switches on automatically.what may be the problem?


One of two things:1.) Your video card is 'stuck' in standby mode, which in turn sends a signal putting the monitor in low power 'standby' mode as well. When you disconnect it, the monitor returns to normal 'on' mode. Rebooting the PC s ... Samsung SyncMaster 753S 17" CRT Monitor

When i power on my pc,the monitor power indicator lights green but about 3s later it goes brown.the monitor screen remains unchanged as to when the computer was powered off.my email is [email protected] this problem?


You are not getting a video signal to the monitor. The fact that it is green initially shows it's working. When it turns orange, that's an indicator that it is getting no signal from the computer. So the next thing to check is if your computer is a ... Dell Computer Monitors

Cpu says no input vga signal, then goes to sleep


The no input VGA signal just means that the monitor is not receiving anything from the graphic card on the tower. Is the card a digital (DVI) output card? You'll know by the connector, it's white and slightly wider than a standard VGA connector. I ... HP GX613AA Pavilion A6300F Desktop PC

Monitor goes to white at cpu shutdown


The problem is in the "soft switch" technology:\015\012On some of Sylvania's newer monitors they have incorporated what is called "soft switch" technology. This allows your ATX power supplied computer to turn your monitor on and off using it?s softwa ... Sylvania L181 18.1" Flat Panel LCD Monitor

Monitor wont get any signal


It should be the problem with ram,\015\012so remove ram from the motherboard and clean using lint free paper towel and inserted it back. this will fix the issue. ... Computer Monitors

Get NO SIGNAL on Acer M1640~Monitor is Fine~Is CPU


Try removing the system memory and clean the brass contacts and the slots it goes into, then reseat the memory and try to boot again, the memory looks like this >>>>>>> ... Acer Aspire M1640 Refurbished Intel Desktop PC - Intel Pentium Dual Core E2160 1.8GHZ, 1GB DDR2, 120

Emonster 600 won't boot up


You should not loose any information seeing that all information is held on your hard drive. As for changing out the processor, it seems pretty intimidating but is rather simple. When you have the side of the computer removed and can see into th ... AMD eMachines Desktop System w/ 17'' CRT Display, 2.0 GHz Athlon 64 3000+ (W3400)

No input signal on monitor after changing resolution


Hi,While booting press F8 , Go to safe mode and change the screen resolution and reboot the system.Hope this helpsSiju.D ... Compaq Evo D500 PC Desktop

Acer lcd monitor ''no signal''


It is screen resolution problem.when you power up the computer press F8 key thene nter in enable vga mode then go to diaply property and set screnn resolution to 1024*768 thenh apply and ok. ... Acer AL1916W 19" LCD Monitor

Monitor blacks out after few seconds


I have post on my link how to simply troubleshoot that..but by the way.. here are some tips that you can do..first check your CPU if it is still running after the monitor is black out..if it is running it means it ... Computer Monitors

Just bought a new ViewSonic Monitor for my PC. When I turn on the computer the monitor screen says "no signal" - turning the blue light yellow. I've plugged the power cord in the back and in the wall socket as well as attaching the blue connector to the back of the monitor and the drive. There's also a cream colored connector that fits into the back of the monitor, but there appears to be no related place at the back of the drive. I put the CD in and still have nothing on the screen.


First make sure the num lock led on key board is link when you press it if it contant on then cpu is not give display.But if it is on/off when you press it then your cpu working fine.Then when you power up the computer press F8 key then e ... Computer Monitors

Monitor Turns Black


This is nothing to do with CPU but maybe your GPU (Video card) It sounds like you built the machine your self & from what you've said it could be an earthing issue if your screen turns off when you tighten the screws or it might mean that your vi ... PC Desktops

No signal to monitor. all cords are tight, and plugged in. no beeps when computer starts up. Can't test anything nothing shows on screen. Tried it on another computer, worked fine. amber light below g


Check the connection which links the CPU and the monitor. Also check the power cable of th3e monitor\015\012\015\012Thanks\015\012Nilesh ... Generic Memory Compaq Presario SR1215CL by HP AMD Sempron 3000+ 512MB 120GB CDRW/DVD w/XP [Refurb] [MIN90] PJ506AA... (PJ506AAR) PC Desktop

T6420 E-Machine won't/Reboot W/O F8 Key


No sync means no video signal to the monitor. The rest sounds like a corrupted OS. This could be from a number of reasons, including a virus. If you have NORTON or MacAfee, Your open to a lot of attacks. Get AVG free, and use Mozilla instead of IE. ... E-Machines eMachines Desktop PC

No signal to TFT monitor and after switch on the CPU starts automatically. Ganesh


Have you tried a different monitor to see what happens? Does the monitor actually say "no signal"?If it says no signal then make sure the cable is connected from the computer to the monitor securely.And in worst case scenarios, one of the ... PC Desktops

The pc does'nt send any signal


Ok, firstly do you see the bios screen at start up before windows starts?If you do, try repeatedly pushing F8 during the bios screen to go to the advanced boot menu and try booting to safe mode. If you can boot to this then its a driver p ... Acer Aspire™ T180 PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.6051 seconds