Having problems with your HP Pavilion a1710n (RK573AA#ABA) PC Desktop ?

I have no monitor signal at all.

\015 It was working fine then one day when I switched it on it appeared to do nothing. I assumed the graphics card had died and bought a new one. The front cover light is on, the fans (PSU & CPU) are working, the HDD feels and sounds like it is spinning and the DVD drives open and close (I recently added a second DVD/CD from an old PC).The PC is an Compaq Presario made in 2006 product Nr RF786AA. I previously added a graphics card and it worked for a year with that. I have tried removing all cards and using the onboard video but no signal.What do I try next?\015

Answers :

You most likely have RAM problems.
\015\012Try reseating the RAM module/s.
\015\012If it still doesn't work, the RAM may be faulty, test the RAM in another computer or take it to your friendly computer shop to test them.
You could try defaulting the bios. To do so find a small jumper on two of three pins near the battery. The jumper is normally in the "norn" position. Moving the jumper from "norn" to 'clr cmos" for 30 seconds and putting it back to "norm" may recover the system.

Good luck!
Repair Help & Product Troubleshooting for HP Pavilion a1710n (RK573AA#ABA) PC Desktop

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

NO SIGNAL What do I do?


These messages are normal when the computer truly goes into suspend mode or loses the video signal (such as when the computer is suddenly turned off).If the monitor displays any of these messages when the computer should be displaying vid ... HP PAVILION A6230N DESKTOP PC

Screen comes on says Acer then No Signal, and goes out. if shut power off and then back on get same result.


This means the monitor believes it's not connected to the computer. Verify the cables first of all. Then try booting in safe mode (F8 key at PC startup) in order to verify that the PC is sending data to the proper video port (you might have a dual VG ... Acer AL2223W 22" LCD Monitor

LG screen goes in stand by. I was using two monitors for several months, everything OK, now I decided to get a new LG Flatron instead of one of the monitors... and only this one goes in safe mode!! Two screens plugged in: Philips analogical working fine no problems. New LG Flatron digital goes in power save mode after few minutes Tried to plug in ONLY the LG, same problem after few minutes. Philips monitor no problems. So it HAS to be a screen function or problem of the LG? Computer: AMD + 3Ghz


Oke having a similar problem atm, this is what i have found so far. was trying to help a friend who has bought the same 19" LG monitor. When i connected the monitor to her PC i noticed that it was not the same connection as the previous one but it ha ... LG 19" Widescreen Flat Panel LCD Monitor

Monitor display prob


Here are some basic trouble shooting tips for new monitors: The picture does not appearCheck to make sure the signal cable is firmly connected in the socket. Check to see if the computer system's power is ON. Check that th ... PC Desktops

I live in Seattle and have an Acer V193B that 'went dark' when I hot-pluggged the VGA connector into my laptop. I *assume* the problem is the chip that buffers the VGA lines is blown. (I know the cable and laptop VGA are not the problem.) The monitor has power (power button glows orange), there is just no video display. Is there any chance that I can get this repaired w/o spending more than the monitor is worth in shipping and repair costs?


First, to check the monitor.\015\012Disconnect the input signal from the computer.\015\012Turn off the monitor and unplug from the A/C source.\015\012Allow the monitor to set for a few mi ... Acer V193 B LCD Monitor

Monitor comes up shows "acer" then says no signal and goes black


The interface between the monitor and the cable might need replacement. Please check it. ... Acer AL2016 W 20" TFT LCD Monitor

Hello Sony RB30 w/ sdm-hx93 monitor. Approx. 7


Blond and Baffled, (CD), it's okay, I believe you have a common problem.The computer sends a video signal to the monitor. The monitor is working fine. Hence - No Signal.Monitor doesn't receive a video signal within a certain s ... Sony VAIO RB30C (VGCRB30) PC Desktop

No signal on startup


If monitor is gave no siganl .Firstaly Check monitor Signal Cable For connected of ur system vga port. if Siganal cable is connected ur pc then Check ur System IF system is gave the Display anthore monitor . Then Proble is ur monitor signal Cable .S ... Princeton Digital VL2018W Monitor

Problem with the monitor


Hi,The three boxes represent the built-in diagnostics of the monitor. The letters G is green, B is blue and R is for red, the 3 color guns of the picture tube of your monitor. The words "Self Test" indicates that it is in diagnostic mode ... Compaq FS7550 17" CRT Monitor

No signal The TV stopped showing a program and on the screen it read, "no signal". In the household there are two other TVs that operate OK. This is a cable TV setup. Checked the cables and they are all connected firmly


This problem requires you to test both the monitor and the signal input form you cable tv setup. Set the monitor up on a computer and see if it works properly. If it does then you may have a problem with the signal conversion of the cable tv to the ... Envision 19" Widescreen Flat Panel LCD Monitor

I have a dell demension 4300 that recently started having issues, slow cutain effect, freeze ups. harddrive clicking away. Then one day I had the blue screen that said an error was detected. Then it wouldn't reconize the harddrive but it would go into the bios screen and then not do anything else. So I took it in to have it diagnosed and they said the edie circuit on the board was fried. They offered me a card option for the back but I opted to replace the motherboard with one that was listed as


CaSmogTech,There is a No Signal on the monitor because the monitor is not receiving a Video Signal.Your computer is not producing a video signal.In essence, your computer isn't working, because there is no Operating System on ... Dell Dimension 4300 PC Desktop

"No signal detected" when LCD connected with DVI-D Cable


Thank you for providing your configuration details.\015\012You have failed to specify wheather or not your LCD Display is under Warrenty.\015\012\015\012Perhaps these simple trouble shooting procedures will get the job done.\0 ... BenQ FP71E 17" LCD Monitor

I have a HP tower and compaq monitor, does this affect the speakers on the monitor? Since I changed the towers out the sound hasn't worked


HP and Compaq are actually now one company. So depending on the age of your tower and the age of the monitor they should be compatible.First you should check the small speaker icon located in the task bar in the lower right hand corner of ... HP Compaq WF1907 Monitor

Lcd monitor power light flashing with no img. seems 2 be frozen


The display is in safe mode and you will need to reset the display to get the display out of the safe mode. There are 2 different model revisions. Please choose the method that will match your revision. Depending on the revision of the monitor, one ... Planar PL1910M (Black) 19 in. Flat Panel LCD Monitor

Dell 2407WFP Monitor losing signal and having colored line artifacts


... Dell UltraSharp 2407WFP 24" LCD Monitor

I have a kyocera kc 100 viewer and it wont wake up the pc monitor can ya help?


Hi,\015\012\015\012As far as I know, your Sharp screen doesn't have a S-video input. How are you inputting the S-video signal to the screen? The fact that it doesn't "wake up" probably means that it isn't receiving a signal. ... Sharp 17" Monitor

LG StudioWorks 700s Monitor NO SIGNAL


First of all I would check your video card. Do you have another monitor that works fine? If so I would hook the good monitor to your video card and see if you are getting a signal. If you still do not have a signal in the good monitor there is someth ... LG Studioworks 700S 17" CRT Monitor

No color red displays.


If you think that electronic repair is very difficult to learn then you have to read this article where only by using a solder gun could solve a Monitor color problem. Of course there were many tough dog cases (very difficult to find out the fault) i ... ViewSonic G70fmb (Black) 17" CRT Monitor

Monitor has no picture


Yes! :)Your monitor is not the problem. Check all the connections from the back of the monitor, to the computer."No Signal Analog" means your monitor is working perfectly, however is not receiving signal from the computer. ... ViewSonic VX922 19" Monitor Flat Panel

Monitor goes to white at cpu shutdown


The problem is in the "soft switch" technology:\015\012On some of Sylvania's newer monitors they have incorporated what is called "soft switch" technology. This allows your ATX power supplied computer to turn your monitor on and off using it?s softwa ... Sylvania L181 18.1" Flat Panel LCD Monitor

No signal - ViewSonic Computer Monitors


You don't specify what kind of monitor, CRT, LCD, or even a TV attached to your system, you're using. It's likely the monitor is set to receive a certain kind of signal (either analog or digital) but it's receiving the other one instead. Before proc ... ViewSonic Computer Monitors

My monitor will not come on when power is applied automatically. the monitor does not come up when my system comes on. I just replaced the monitor which i swapped same exact monitor, but this one will not boot when the system comes up.


Please work through the following steps to troubleshoot your no power problem with a ViewSonic Monitor:\015\012\015\012Troubleshooting Power Issues: \015\012\015\012Disconnect and securely reconnect ... ViewSonic E70f 17" CRT Monitor

What is the triggering signal to power on the monitor?


Most modern monitors use the Horizontal sync line to determine when to go to standby. ... BenQ V773 17" CRT Monitor

We are getting a No Signal on our monitor,


I have a Acer Aspire M1202 and got the no signal on the monitor it was the power supply. My was a short in OEM power supply unit. ... Acer Aspire L100 PC Desktop

My monitor not turn on when the computar turn on to . and when you try to turn on the monitor its like flash for 1 sec and tune off to black . to turn the monitor on i need to prees the botten 30 time on the monitor to turn him on.


First you sec your monitor power cable is not loos or power in properly if ok then you sec your monitor VGA cable is properly conect to your pc if ok then you disconnect your VGA cable in your pc then you power on your monitor and sec that youre mone ... PC Desktops
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3150 seconds