Having problems with your HP Computer Monitors ?

Monitor screen stuck at input not supportedhow do I go back ?

Answers :

Assuming you have not changed the connection to your monitor (from VGA to DVI signal, for example), or that you have not messed around with the display settings, further below may be the situation. Else, you need to access your LCD menu and choose the other type of input SIGNAL.
\015\012It appears your display adapter is set to a different refresh frequency or resolution, either accidentally or due to some power glitch.
\015\012If you cannot set the resolution because this message is preventing you from getting to the display settings window, try rebooting your PC in Safe Mode. It'll take a while longer than usual, but when you're finally running, try setting your display adapter to a resolution of 800 x 600 pixels at 60Hz settings. This is available under "Advanced->Adapter->List all modes".
\015\012To reboot in safe mode, try pressing the PF8 keys repeatedly after the POST messages disappear just after turning the power on. This only works if this key is enabled to operate from the BIOS settings.
\015\012To get to the BIOS setup, Look at the first messages displayed on your screen indicating what key to press. It's usually the Delete or PF2 key, but different BIOS manufacturers use different keys.
\015\012Once inside the BIOS setup, find the way to enable the PF8, PF9, PF10, etc keys. Save your settings and reboot.
\015\012Now you may try PF8 again to go to Safe Mode.
\015\012If your PC is Ok, then you may try setting your monitor to a higher resolution, taking care not to exceed the maximum values, as stated on the user's manual.
\015\012Good Luck!
Repair Help & Product Troubleshooting for HP Computer Monitors

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Monitor screen stuck at input not supportedhow do I go back ?

Assuming you have not changed the connection to your monitor (from VGA to DVI signal, for example), or that you have not messed around with the display settings, further below may be the situation. Else, you need to access your LCD menu and choose t ... HP Computer Monitors

Input select screen is poping out by itself and anoying me.

One of two things:1) The input button is stuck and is staying pressed down, making the input select screen pop-up, in which case I would suggest wiggling it and making it un-stuck (Thats the technical term by the way :) ).OR ... BenQ FP931 19" LCD Monitor

Viewsonic PT775 CRT won't accept VGA input

Sounds like it's time for a new monitor to me. The fact that it has been acting up and works on and off is a sure sign that it was going downhill. ... ViewSonic PT775 Monitor

Hyundai LCD monitor L70N Stuck in sleep mode?

I'm not sure if this is the solution, but something happened. I plugged in the monitor one last time before I was going to throw it out. I plugged in the power but left the VGA cable unplugged in hopes that I could get into the menu screen of the mon ... Hyundai ImageQuest L70N 17" LCD Monitor

ViewSonic VX922 monitor - black screen - green power light flashes

PLEASE read Carefully so here is a fix for the green blinking light ...the monitor is going into shutdown....protect mode......THIS is ...Only for the seasoned electronic service tech ......YOU NEED TO BE into Electronics ..or have electronic backgro ... ViewSonic VX922 19" Monitor Flat Panel

Monitor light goes off after 2 second - HP Compaq 1501 15" LCD Monitor

Dear i have send many instructions to solve your problem. pls read carefully and see. all the information can helps you.Thanks.My suspicion is that this is a capacitor problem. If the screen is\015\012turning off every two seconds or so a ... HP Compaq 1501 15" LCD Monitor

Dead pixel I have a black spot on the bottom right corner of the screen..can it be repaired?

\015\012Please read the WHOLE of this guide before starting.\015\012Software Method\015\012\015\012Try running pixel fixing software. Stuck pixels can often be re-energized by rapidly turning them ... HP Compaq WF1907 Monitor

I have a new DELLS2209W Monitor. On occasion my

Hi there,I want you to try something next time this happens, instead of rebooting the computer, just cut power to the monitor. Then switch it back on. Does the screen come back up?Comment back and let me know ... Dell Computer Monitors

Vaio fj270 wont boot to windows stuck with a blinking underscore

Hello and thank you for using Fixya!\015\012\015\012First, check and make sure there are no CD's in the CDrom player. Also, check an make sure there is no external storage devices, such as a flash drive, external, etc.\015\012 ... Sony VAIO VGN-FJ270/B Notebook


Hi there,to dual screen you need a video card with VCM and HDMI compatibilities. most new cards these days have it. if your stuck please follow the address below. ... Dell Latitude E6500 Laptop

Nothing on the screen after power on

Turn on the computer and complete the following steps:\015\012Step 1: Check cable connections\015\012(If you can see the initial HP or Compaq logo screen but later lose the picture, you can skip to Step 2.)\015\012check the video cable connection on ... HP Compaq FP 7317 17" Flat Panel LCD Monitor


Hello, Sorry to hear that you are having problems with your monitor. While the monitor is turned on and plugged up to your computer system, try looking very closely at sharp angles from above, if you can barely see your desktop the problem is ... Chi Mei Corporation CMV-T39D Monitor

Completley blank screen on boot up

You didnt mention the brand of the screen. this may be a input issiue if it has DVI and Svga and so on. check the menu to see if the monitor can be shifted to the other source. take the cable off and make sure no pins are loose or bent. then put cabl ... NEC PowerMate ES SlimLine PC Desktop

Laptop to tv

If your tv don't have s video input,you can get an Svideo to RCA cord.\015\012If the tv does have s video input,just get an s video cable and plug it into the tv and computer s video ports and follow the steps below for setup.\015\012 ... Toshiba Satellite L305D-S5895 Notebook

Hp pavilion f1930 shows pic for 2 secs. then blank

Rather than guessing, or blaming the computer, I fix the F1903 backlight problem. Power the monitor and using a bright flashlight check the screen to ensure there's an image, or the menu when you press the menu button. Nearly every one of the F1703 a ... HP Pavilion F1903 19" Flat Panel LCD Monitor

Trying to use my hp laptop with sony lcd hdmi tv for movies

You should have an S video port on both tv and computer.\015\012\015\012If your tv don't have s video input,you can get an S video to RCA cord.If the tv does have s video input,just get an s video cable and plug it into the tv and c ... HP Pavilion dv6000z Notebook

Viewsonic VX2233WM LCD DVI issue

... ViewSonic VX2235wm LCD Monitor

I need help setting up the DVI input.

Hi,\015\012\015\012There are two ways to do this.\015\012\015\012First and simplest is to simply shutdown the pc, disconnect the analog from the back of your PC and connect the DVI cable to the PC and monitor. When you turn i ... ViewSonic VX924 19" LCD Monitor

Viewsonic VG2230wm 22 Blank screen

Look for bad caps in the power supply first, see example of failed VIEWSONIC monitors due to bad caps here: http://s807.photobucket.com/home/budm/allalbums ... Relisys RLT1720 17" LCD Monitor

My friend gave me a new Samsung 953bw monitor and said that it did not work. It acts like no power is connected. My guess is it maybe a fuse inside. How do you get it open without damage?

I have repiared those boards , but I haven't taken this model apart yet so here are some general notes. \015\012\015\012If you get stuck, email me notes\015\012or pictures to [email protected]\0 ... Samsung 953BW LCD Monitor

Screen shows message "no input signal" and monitor goes to sleep.

Monitor show "no input singnal" error masage when not gating any type of video singnal ,\015\012so if u realy check your monitor wires for correctty plugged in . \015\012then:- Two possibilities:\015\012either the ... HP vp17 Monitor

Dell 2407WFP Monitor losing signal and having colored line artifacts

... Dell UltraSharp 2407WFP 24" LCD Monitor

Laptop to tv

\012Right, well, IF your TV has a DB15 Female Plug on it then you CAN, connect it up and it will work, as a second "Monitor". OR If the laptop, has a "Composite Video" a Yellow RCA socket, then you ... Acer Aspire 5500 5570-2609 Laptop

My Samsung SyncMaster 2463UW no longer auto detects the video input. I normally use it with my MacBook Pro - I turn it on, it detects the digital output and Bob's your uncle. Today, I turned it on and it continues to cycle through analog, digital and HDMI input sources. However, I can actually see the correct output when it switches to ''digital'' mode - it just won't stay there.

OK UncleBob...Try this for me..does hitting the menu button on the monitor do anything for you?..NO huh...Do any of the other buttons (besides power) do anything for you?..Probably not?! Your in the early stages of my fixed problem...Is your warranty ... Samsung SyncMaster 753S 17" CRT Monitor

W17e says "input not supported"

Hi - here's what I found about your wide screen monitor:The HP Pavilion w17e LCD wide-screen monitor has the following features:\015\012 \015\012\015\0121440 x 900 factory-set resolutio ... Acer AL1916W 19" LCD Monitor
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.7394 seconds