Having problems with your HP Compaq ProLiant DL380 G4 Server ?

HP server with 2k3 reboots again and again.

\015 Can be a few seconds after it starts booting, halfway through loading server 2003, its flashes a blue screen like BSOD error and immly restarts from begining.\015\012Checked the DIMM all are working fine.... \015\012\015\012Pls need some expert help to fix\015

Answers :

Hi,

Have you installed any service packs for Win 2K3?
if not yet, please go for the latest service packs since there were some problems identified with win 2k3 and this is one of them.

You can also try restarting the sytem in safe mode by pressing F8 after boot screen.

Hope this helps.
Thanks.
Repair Help & Product Troubleshooting for HP Compaq ProLiant DL380 G4 Server

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

HP server with 2k3 reboots again and again.


Hi,Have you installed any service packs for Win 2K3?if not yet, please go for the latest service packs since there were some problems identified with win 2k3 and this is one of them.You can also try restarting the sytem ... HP Compaq ProLiant DL380 G4 Server

PCL XL error Subsystem: KERNEL Error: Illegal Tag Operator: 0x23 Position: 713 when printing multi copies on Kyocera Mita Laser


FIXED: PCL XL error when printing to a HP printer\015\012\015\012I fixed this problem by installing the KB948046 Hotfix from Microsoft (thanks to Brent Follett from forums11.itrc.hp.com for pointing me in the right direction).\015\0 ... PC Desktops

The server will not fully power down. It attempts to (sputters)and then the fans just run and the lights on the front just flicker, no alarms. AMI Megaplex 2 mother board 2816 MB ram DB 960 2 power supplies Trimm 9u case already tried replacing the cmos battery thinking that that might be the problem, because if I remove power ie unplug the cmos resets its self and I have to correct the time, date, etc,etc,


We would issue remote shutdown commands and sometimes\015\012the system wouldn't completely shutdown and it went into the undead state.\015\012Anyone connected to the machine still worked but no new connections allowed\015\012and no ... AMI MegaPlex II 9U (S657820000000) Server

How to install windows OS on Samsung N128 netbook


My Windows XP installation has reached its half-life. (You do\015\012know that Windows has a half-life, don’t you? Every installation of\015\012Windows naturally degrades along a logarithmic curve until it becomes\015\012annoying, then ... Samsung N120-12GBK Netbook

Proliant DL380 G4 server occasionally rebootes.


Try to update the firmwares. Maybe the threeshould of the fans are incorrect. A new firmware can correct this problem.\015\012\015\012Let me know if this post helps ... HP Compaq ProLiant DL380 G4 Server

RHEL 5.3 fails to boot at "bringing up interface"


I found the solution.\015\012Take in accunt that I'm a total newbie on Linux boxes.\015\012\015\0121 - Previous to any change, following RH deployment guide, I backed up the network config on a file called "network-config-10.1.1.5" ... HP ProLiant DL360 G5 Server

Problem rebooting Dell PowerEdge Server 2600


ERROR 02A2: BMC System Error Log (SEL) Fullpress F1 to continue or F10 to enter BIOS.I wait for 2 minutes without doing any thing my server get started normally.Please help me how to stop this error ... Dell PowerEdge 2650 Server

Booting from cdrom


Locate your copy of "SmartStart" (SS) for the proliant server. Boot into the Bios and check that the CDROM boots before the HD. Insert the CDROM Smartstart into the server and restart. When SS comes up you can use the array erase utility. Erase the a ... Compaq ProLiant ML530 Server

IBM server dc can't boot due to system32driverspci.sys missing


You mention on boot that the server shows a logical drive of 158GB, which obviously means the server is detecting the drives ok.Quite often Windows doesn't have the correct drivers to support systems using RAID controllers such as IBM Ser ... IBM eServer xSeries? 206m

Clock and calander on Win 98 won't keep proper time or date


2 possible solutions1. Replace the CMOS battery that is on your motherboard.2. The time zone you have set may not be correct. Please read microsofts article below:\015\012\011Thanks t ... PC Desktops

Unable to connect to DHCP server. getting 169.254 ip Have already tried the following: unplug/ reset reboot router; ipconfig /release /renew; Run MBAM Version 1.43; System restore to a date when connection was viable; tried cable on alternate computer which was able to connect with no problem ( not cable or router); Network connections disable/ enable; Manually set ip in tcp/ip properties, rebooted than reset to automatically connect; Swap out linksys nic for a wireless nic; Computer is Dell run


Whew! Awesome troubleshooting work there.When it's configured for DHCP, go to the Internet Protocol (TCP/IP) Properties and hit Advanced to bring up the "Advanced TCP/IP Properties" dialog.Under the IP Settings tab, the top panel s ... Dell Dimension 3100 PC Desktop

Problem with DL380 G4 after reboot


Do you use software/hardware raid?\015\012hopefully hardware :-)\015\012and is it mirrord or raid5? ... HP Compaq ProLiant DL380 G4 Server

The Dell 2950 Server we have cannot reboot the disc drives


The raid may be fine you need to reinstall the OS. \015\012The best way is to drop the raid array astablish a new raid array then install you new OS on a new raid array.Very nice server you have. ... Dell PowerEdge 2950 (becwfk1_6) Server

IBM starting problem.


Hi , if your dont have any data, try to get the IBM Netfinity CD for 4000r which supporting the OS 2003. Usually IBM provide a cd on each NEtfinity server. Check on the IBM website for more details about your Server Compatibility on 2003 server.\015\ ... IBM Netfinity 4000R 8652 Server

Server doesnt boot


First create a floppy disk with your RAID driver for W2K3 Server. Next boot the server with the W2K3 Server CD, and hit F6 when prompted, and S to add the specific driver for your RAID and using the floppy to get the driver installed.\015\012 ... IBM xSeries 346 Server

How to set server auto boot-up after power is back on the UPS


Hi, I have this on my server and it gives me options on for the server to reboot if there is a system problem or unexpected shut-down, this may help and maybe worth a try it works fine with windows server 2003. ... HP Compaq ProLiant ML350 G5 Server

Problem in reboot the server in domain


We are having one server poweredge 2900 which was open and did some preventive maintenance for dust and other diet. But after the preventive maintenance, we try to switch on the server but the hard disk drives cannot display at the same time. ... Dell PowerEdge 2950 (becwfk1_6) Server

What do you do to fix when web address comes up


HTTP Error 400 Bad request\015\012\011\011\011 \015\012\011\011\011 Introduction \015\012\011\011\011 \015\012\011\011\011\011The Web server (running the Web site) thinks that the data\015\012\011\011\011\011 stream sent by the c ... Toshiba Satellite A100-S8111TD Notebook

Each Monday the processes run very high. we have to reboot the server to get some free so people can do their work. Just wondering about a memory leaks it only does this on Mondays. We can not find any answers for this issue, stopeed anti-virus and all services that can be stopped but nothing changes. a reboot seems to be the only thing to do.


Update BIOS and COLD BOOT the Server Once. ... HP Compaq ProLiant DL360 G3 Server

Dell Poweredge 4300 will not boot up after cmos battery replaceme


Configure your System bios and reboot. Your Hard disk drive was not configured. Pl configure. it will work properly ... Computer Servers

Wont boot fully


Try resetting the system BIOS.There are three ways to do this, depending on the mainboard style.Check for a jumper near the mainboard battery.If there is one, and it is a three pin style, move the jumper from the side it is on ... IBM eServer xSeries 346

Cannot boot Linux Enterprise 3 on DL360 G5


It looks like you rebooted with the installation CD/DVD in the CD/DVD drive. Take the install disk out of the optical drive, and set the server to boot from a hard drive, preferably the hard drive with Linux installed on it. You can do it. I have ... HP ProLiant DL360 G5 (457922-001) Server

We have had an Intel Carrier Grade server TIGPR2U for 5 years now. The server is running Windows 2000 SP4 . Last week the server failed. On a subsequent reboot I can see the CD ROM light up , HD light up once and then no activity. There are no alarms on the front alarm. The unit is connected to a lan , NIC does comes up. I am not sure if I have a SCSI controller failure or a HD failure


Can you remember the cause why the server failed? it may be due to a power surge? or some of the peripherals doesnt work. Check the memory, ide cords, and the circuit board. Let me know more info about the server. And the behavior. Thank you. ... Intel Carrier Grade Server TIGPR2U

System restore on server 2003


Before we begin, you'll need an XP CD. Doesn't matter if it's home or pro. It shouldn't matter if it has a service pack on it, since all the files will be the same source. In testing i used a slipstreamed cd that already had sp1 on it.In XP, sy ... PC Desktops

Run Compaq Array Configuration Utility


Hi Foambob,\015\012\015\012Try all means to get a smartstart CD.\015\012Normally new version will be able to use on older hardware , but no guarantees.\015\012I have always found it easier to use smartstart CD auto mode. ... Compaq ProLiant 5500 Server
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 0.3718 seconds