Having problems with your HP Compaq Presario v3000z Notebook ?

I have a compaq presario v3000. everytime i start it a blue screen appears then it'll show a problem occured.... safe mode safe mode with networking last known good configuration choose to start windows manually i have tried all of these but it'll just start over and over again.


Answers :

The windows Boot.ini files probably corrupt and windows needs to be repaired. The following repair is for the XP operating system but Vista nd Windows 7 is similiar except the they repair themselves.....
\015\012
\015\012Windows Start-up Errors
\015\012Step one, you need a Windows Installation CD. If you only have a recovery disk set like the ones from HP or Compaq they will not do what you need done. Under normal circumstances however, you can use a Dell disk because the Operating system is on a stand-alone disk. All retail versions are also acceptable as well as upgrade disks. For a rule of thumb, if the disk has the Microsoft hologram it should work.
\015\012While the computer is first starting up and you see the manufacturers splash screen, tap F12 (some computers it’s F9, others it may be another key, you may have to watch and see if the computer lists the key strokes for getting to the boot menu. If you still cannot find it, boot into the BIOS settings and change your boot order there. Save your settings and exit, the computer will now seek the cd rom as its boot source first.
\015\012Place your Windows disk in the computer and start it up. When you see the test at the top of the page “Press Any Key To Boot From CD” Just hit the space bar to activate. The next screen you will see will most likely be a Windows setup screen, when you see this press the “R” key to get to the recovery console. It will get there, it may take a little time, patience. Once it loads you will be given a choice of Windows installations, there should only be one, if there are more, always pick number one. It may ask for an administrators password, if you have not set this particular password, then just leave it blank and press enter. The next prompt you see is:
\015\012C:\\Windows>
\015\012You need to type the following:
\015\012cd \\
\015\012hit enter. Pay close attention to the spacing between the characters. There is a space between the character “d” and the “\\”
\015\012You are now at the ROOT of the drive, this is where basic commands can be given and changed. You should now see the following:
\015\012C:\\>
\015\012Now type the following:
\015\012CHKDSK /R
\015\012Hit the enter key.
\015\012The chkdsk /r command also includes the P command and will also look for lost recoverable information in bad sectors.
\015\012There are occasions depending on how corrupt the system is, that this process could take several hours, so be patient with it.
\015\012Now, after chkdsk has run type the following:
\015\012FIXBOOT
\015\012Hit the enter key.
\015\012It may prompt you with a warning, that’s ok, just continue. When fixboot has finished, type: EXIT hit enter and windows will reboot. When the system reboots, tap the F8 key during this time and you will see the multi-boot menu come up. Scroll to the title “Last Know Good Configuration” and hit the enter key. If you were having some simple drive errors this should have fixed them.
Repair Help & Product Troubleshooting for HP Compaq Presario v3000z Notebook

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Missing NTLDR file


The first thing to do is try to change back whatever hardware or software change you just made (this could be as simple as leaving a floppy disk in the drive or you need to reseat the IDE cables). If the contents of the drive are especially important ... ASUS Eee PC 2G Surf Notebook

When booting up, when windows is finished I cannot work mouse


Dear sir \015\012\015\012As it happens I still need some clarification what you were doing just before this incident happened but i will provide you a solution which might help you \015\012\015\012\015\012ASSUMPTIO ... Toshiba Satellite A105 Notebook

Computer has frozen on windows logo


1) Which version of Windows ? For the following discussion I am assuming it is 2000, XP or higher. You may also want to print this, it's long.2) Is this this the low resolution Windows logo on the black scre ... Fujitsu Siemens SCALEO 600 (FSP:83C005617) PC Desktop

Due to an incomplete download my screen is now blank.


I think it maybe something going on with the computer and not the monitor itself.\015\012\015\012As you turn on your computer keep pressing the F8 key and it will come to a boot menu. Choose safe mode and let it boot up. If you can get into safe mo ... ViewSonic VA1916w LCD Monitor

Windows will not start up


Have you tried pressing F8 as the computer is booting? Press it repeatidly as the computer starts. If the computer is not that far gone you should get a Multi-options menu-choose safe mode, then post back after you get into safemode. Post back if y ... PC Desktops

Note book freezing after fan change


This is just an easy problem... what you'll have to do is follow this stepsStep 1: If you have manual of your computer it is better.. restart your notebook, press and hold the key to boot in BIOS setup... try pressing this key F1, F2, Del ... HP Compaq Presario 2200 Notebook

When I turn on starts shows microsoft windows then goess to startup repairs


Maybe to start the computer in Safe Mode will work, maybe system restore will work from there. Basically to do this with XP as your Operating System, press the power button and immediately start tapping the F8 key, this will take you to a screen with ... Acer Aspire 5500 5570-2609 Laptop

When i turn it on it takes me to a black screen that says start windows normally or start in safe mode and stuff and i click start normally and it keeps taking me back to the same place no matter what i need help??


Please select last known good configuration from the black screen if this doesnt work select safemode from that screen and restore your computer to earlier time when it was working fine,. please follow the steps below to restore your computer.\ ... PC Desktops

X2Gen MW19V Greenish display


Recent Hardware Changes. Corrupt drivers for any recently installed hardware can crash the system. To get rid of the corrupted drivers, do the following:a. Uninstall all recently added hardware. b. Try to restore the system t ... X2Gen MG19MY 19" LCD Monitor

***stop: Ox00000024 (Ox00190203, Ox828466D8, Oxc0000102, Ox00000000)


1.Shut down your computer and start hitting F8 key (on the top line of the keyboard.) immediately (on the top line) up and down at least 20-30 times and choose "Last known Good configuration."\015\012\015\012\015\0122.If this does not wor ... AMD Sempron 2800, 2.0 GHz 2800+ (SDC2800DUT3D) OEM / Unboxed Processor

I have a Dell Inspirion 1525, All of my wireless connections and signals are good and working fine. I get signal from the router on my home computer. But it will not do anything internet related. When opening Explorer, the diognostics says The Domain Server may be down. Can anyone translate?


This is quite a long reply and may appear very technical - however, have a read through and see what you can do / answer \015\012\015\012| |All of my wireless connections and signals are good and working fine.||I will assume by this you m ... Dell Inspiron 1525 Notebook

I have a gateway MA7 and whenever i start it up it goes to the ''we wpologize for the inconvenience , but windows did not start successfully....'' screen. If I choose to start windows normally or from the last configuration that worked it goes to the windows xp screen and won't go past there. Any ideas on what might be wrong or how to get it to work?


I hate that screen. Everybody does. Thing is it know you hate it. It can sense your frustration. I recommend therapy. ";-}Ok seriously.Have you loaded any new software or perhaps downloaded anything lately? Yes It could be a virus o ... PC Laptops

MY DAUGHT WAS USING MY COMPUTER AN SHE DOWNLOADED SOMETHING WITHOUT ME KNOWING AN,I HAVE SOME ICONS ON MY COMPUTER THAT WILL NOT DELETE OFF HOW DO I FIX THIS PROMBLEM


You can trying using safe modeTo get there depends on your OSIf your using Windows 98:\015\012\015\012Restart\015\012the computer.\015\012Just\015\012after the POST diagn ... PC Desktops

I have a compaq presario v3000. everytime i start it a blue screen appears then it'll show a problem occured.... safe mode safe mode with networking last known good configuration choose to start windows manually i have tried all of these but it'll just start over and over again.


The windows Boot.ini files probably corrupt and windows needs to be repaired. The following repair is for the XP operating system but Vista nd Windows 7 is similiar except the they repair themselves.....\015\012\015\012Windows Start ... HP Compaq Presario v3000z Notebook

OS does not work in pc


The Windows 98 option seems to be DOS-only. You could try typing WIN or WINDOWS at that C:\\> prompt.\015\012\015\012For Windows XP, you can try a few things:\015\012\015\0121. Boot into Windows XP, but hit F8 BEFORE the s ... PC Desktops

The power light glows solid, but there is no display. The screen doesn't come on at all


If the symptoms start from the moment you turn you PC on, and you don't even see the POST messages as it boots, chances are your monitor has given out the ghost. Time to replace it. \015\012However, if you see some text lines and logos as soo ... Samsung SyncMaster 931B 19" LCD Monitor

I have a eMachine with XP and tried to use restore disks. The first disk started working then got an error message about output to A:/Ghosterr. I called the tech support # and was told it was out of warranty, that my disks were damaged and I couldn't buy new ones. Said I had to find local technician to work on it. Does this sound correct? Reading here it sounds like I can try that F8 trick above to restore?


I am not sure what you mean by the F8 Trick. If you mean hitting F8 (or F5) at boot up time, that will get you to a boot menu where you can choose to boot into safe mode with network, without network, and a few other options, then yes, that is the t ... E-Machines eMachines Desktop PC

I need to get into my computer, but I forgot the password


Hello Buddy,\015\012\015\012If you have not tried going to Safe Mode, try booting the computer in Safe Mode. To get there, you will need to press on the F8 key soon as you press the power button to turn it on. Once you get to the Advanc ... Toshiba Satellite A135-S2386 Notebook (PSAD6U-01D00D) PC Notebook

Gateway desktop xp starts then flashes blue screen for split seco


Sometimes they make the recovery disk with windows on it, but not the programs that start windows during the boot up phase. One of the three main files that boots into windows is corrputed or your Master Boot Record is missing. There are two options ... Gateway PC Desktops

My Acer Aspire 1500 laptop wont pass startup.


It seems that your laptop hardware is good and it seems that it is a software issue.\012\012Boot in safe mode: When your laptop start, press the F8 key. then it will ask you which boot device to boot from, browse usin ... PC Laptops

Compaq Presario V2000 boot problem


Bios is not on an hard drive, is on a memory chipinside computer. Your main problem is not with Bios, but with system.On many Compaq you can start the recovery tool by pressing f10 or f11 on startup. The system recovery tool it is located on ha ... HP Compaq Presario V2000 Notebook

Not working Have a HP Pavilion Dv2000, have used it every day nearly for over a year. Suddenly it crashed. When I came to put it on today it looks like its going to start - says windows starting then a bright blue page comes on with writing on but doesnt stay on long enough for me to read - I can make out a problem has occurred. Then it goes back to rebooting - its as though on a loop keeps trying to get to the opening windows page. HELP would be great!


Hello one solution is to start the PC in safe mode. press f8 just before\015\012winodws start and choose safe mode. Im not sure that gonna work but you\015\012can give it a try. if you can start windows then restore one or two\015\012days back ... HP Pavilion dv2000t 14.1" Notebook Laptop PC (Intel Core 2 Duo T5500 1.66 GHz, 1GB RAM, 100GB HDD, D... PC Notebook

Big issues with Vista on my Inspiron!


Did you try to "Restore this computer to another point in time"? Then you press F8, and choose "System Restore" then another screen asks if you want to go to safe desktop, or do a system restore, when you select system restore,another window, a bit ... Dell Inspiron 1545 Notebook

It won't work!


Pop an XP CD in and Boot from it.. When it gets to the point where it says "Press "Enter" now to install Windows or Press "R" for the Repair console"? press R.. This will take you to a Command C: prompt after it asks which "Windows installation you w ... HP Compaq Presario V2000 Notebook

I am acting as middle man. My daughter lives 15 miles away and is having a problem with her Dell desktop PC running XP. She has a blue screen message. We have tried using ctrl/alt/delete with no reaction from the PC. We have tried safe mode and the screen goes completely black. We have tried the safe mode option of going to the last known good connection and the wallpaper comes up with none of the desktop icons but it appears something is happening since an hour glass repeatedly shows on th


If you have tried Safe Mode but cannot finish loading Windows then either you have a very serious virus issue or your hard drive has become corrupted. Normally Safe Mode would give you the opportunity to try and resolve the issue or possibly remove a ... Dell Vostro 200 Mini Tower With 20" Flat Panel Monitor PC Desktop
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.electronic-servicing.com || Terms of Use || Contact || Privacy Policy
Load time: 1.2091 seconds